From mboxrd@z Thu Jan 1 00:00:00 1970 From: matt.porter@linaro.org (Matt Porter) Date: Fri, 1 Nov 2013 15:45:56 -0400 Subject: [PATCH v2 7/9] phy: add Broadcom Kona USB2 PHY DT binding In-Reply-To: <1383335158-19730-1-git-send-email-matt.porter@linaro.org> References: <1383335158-19730-1-git-send-email-matt.porter@linaro.org> Message-ID: <1383335158-19730-8-git-send-email-matt.porter@linaro.org> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org Add a binding that describes the Broadcom Kona USB2 PHY found on the BCM281xx family of SoCs. Signed-off-by: Matt Porter --- .../devicetree/bindings/phy/bcm-kona-usb2-phy.txt | 15 +++++++++++++++ 1 file changed, 15 insertions(+) create mode 100644 Documentation/devicetree/bindings/phy/bcm-kona-usb2-phy.txt diff --git a/Documentation/devicetree/bindings/phy/bcm-kona-usb2-phy.txt b/Documentation/devicetree/bindings/phy/bcm-kona-usb2-phy.txt new file mode 100644 index 0000000..db309e2 --- /dev/null +++ b/Documentation/devicetree/bindings/phy/bcm-kona-usb2-phy.txt @@ -0,0 +1,15 @@ +BROADCOM KONA USB2 PHY + +Required properties: + - compatible: brcm,kona-usb2-phy + - regs: offset and length of the PHY registers + - #phy-cells: must be 0 +Refer to phy/phy-bindings.txt for the generic PHY binding properties + +Example: + + usbphy: usbphy at 3f130000 { + compatible = "brcm,kona-usb2-phy"; + reg = <0x3f130000 0x28>; + #phy-cells = <0>; + }; -- 1.8.4