From: peter.chen@freescale.com (Peter Chen)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v3 10/10] usb: chipidea: imx: Enable CI_HDRC_IMX_EHCI_QUIRK
Date: Tue, 5 Nov 2013 09:55:25 +0800 [thread overview]
Message-ID: <1383616525-10769-11-git-send-email-peter.chen@freescale.com> (raw)
In-Reply-To: <1383616525-10769-1-git-send-email-peter.chen@freescale.com>
Enable CI_HDRC_IMX_EHCI_QUIRK for controllers who use mxs-phy.
Signed-off-by: Peter Chen <peter.chen@freescale.com>
---
drivers/usb/chipidea/ci_hdrc_imx.c | 17 ++++++++++++++---
1 files changed, 14 insertions(+), 3 deletions(-)
diff --git a/drivers/usb/chipidea/ci_hdrc_imx.c b/drivers/usb/chipidea/ci_hdrc_imx.c
index fd26c38..78ccde1 100644
--- a/drivers/usb/chipidea/ci_hdrc_imx.c
+++ b/drivers/usb/chipidea/ci_hdrc_imx.c
@@ -25,6 +25,7 @@
#define CI_HDRC_IMX_IMX28_WRITE_FIX BIT(0)
#define CI_HDRC_IMX_SUPPORT_RUNTIME_PM BIT(1)
+#define CI_HDRC_IMX_MXS_PHY_EHCI_QUIRK BIT(2)
struct ci_hdrc_imx_platform_flag {
unsigned int flags;
@@ -33,17 +34,24 @@ struct ci_hdrc_imx_platform_flag {
static const struct ci_hdrc_imx_platform_flag imx27_usb_data = {
};
+static const struct ci_hdrc_imx_platform_flag imx23_usb_data = {
+ .flags = CI_HDRC_IMX_MXS_PHY_EHCI_QUIRK,
+};
+
static const struct ci_hdrc_imx_platform_flag imx28_usb_data = {
- .flags = CI_HDRC_IMX_IMX28_WRITE_FIX,
+ .flags = CI_HDRC_IMX_IMX28_WRITE_FIX |
+ CI_HDRC_IMX_MXS_PHY_EHCI_QUIRK,
};
static const struct ci_hdrc_imx_platform_flag imx6q_usb_data = {
- .flags = CI_HDRC_IMX_SUPPORT_RUNTIME_PM,
+ .flags = CI_HDRC_IMX_SUPPORT_RUNTIME_PM |
+ CI_HDRC_IMX_MXS_PHY_EHCI_QUIRK,
};
static const struct of_device_id ci_hdrc_imx_dt_ids[] = {
{ .compatible = "fsl,imx6q-usb", .data = &imx6q_usb_data},
{ .compatible = "fsl,imx28-usb", .data = &imx28_usb_data},
+ { .compatible = "fsl,imx23-usb", .data = &imx23_usb_data},
{ .compatible = "fsl,imx27-usb", .data = &imx27_usb_data},
{ /* sentinel */ }
};
@@ -153,11 +161,14 @@ static int ci_hdrc_imx_probe(struct platform_device *pdev)
if (imx_platform_flag->flags & CI_HDRC_IMX_IMX28_WRITE_FIX)
pdata.flags |= CI_HDRC_IMX28_WRITE_FIX;
- if (imx_platform_flag->flags & CI_HDRC_IMX_SUPPORT_RUNTIME_PM)
+ if (imx_platform_flag->flags & CI_HDRC_IMX_SUPPORT_RUNTIME_PM) {
pdata.flags |= CI_HDRC_SUPPORTS_RUNTIME_PM;
data->supports_runtime_pm = true;
}
+ if (imx_platform_flag->flags & CI_HDRC_IMX_MXS_PHY_EHCI_QUIRK)
+ pdata.flags |= CI_HDRC_IMX_EHCI_QUIRK;
+
if (data->usbmisc_data) {
ret = imx_usbmisc_init(data->usbmisc_data);
if (ret) {
--
1.7.1
next prev parent reply other threads:[~2013-11-05 1:55 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-11-05 1:55 [PATCH v3 00/10] Add power management support for chipidea Peter Chen
2013-11-05 1:55 ` [PATCH v3 01/10] usb: chipidea: Add power management support Peter Chen
2013-11-05 1:55 ` [PATCH v3 02/10] usb: chipidea: imx: add " Peter Chen
2013-11-05 1:55 ` [PATCH v3 03/10] usb: chipidea: add wakeup interrupt handler Peter Chen
2013-11-05 1:55 ` [PATCH v3 04/10] usb: chipidea: usbmisc_imx: remove the controller's clock information Peter Chen
2013-11-05 1:55 ` [PATCH v3 05/10] usb: chipidea: usbmisc_imx: add set_wakup API Peter Chen
2013-11-05 1:55 ` [PATCH v3 06/10] usb: chipidea: imx: call set_wakeup when necessary Peter Chen
2013-11-05 1:55 ` [PATCH v3 07/10] usb: chipidea: imx: Enable runtime pm support for imx6q Peter Chen
2013-11-05 1:55 ` [PATCH v3 08/10] usb: chipidea: host: add quirk for ehci operation Peter Chen
2013-11-05 1:55 ` [PATCH v3 09/10] usb: chipidea: host: add ehci quirk for imx controller Peter Chen
2013-11-05 1:55 ` Peter Chen [this message]
2013-12-03 21:50 ` [PATCH v3 10/10] usb: chipidea: imx: Enable CI_HDRC_IMX_EHCI_QUIRK Marc Kleine-Budde
2013-12-04 1:40 ` Peter Chen
2013-12-04 8:33 ` Marc Kleine-Budde
2013-12-04 13:05 ` Peter Chen
2013-12-03 18:15 ` [PATCH v3 00/10] Add power management support for chipidea Greg KH
2013-12-04 1:35 ` Peter Chen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1383616525-10769-11-git-send-email-peter.chen@freescale.com \
--to=peter.chen@freescale.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).