From: r.sricharan@ti.com (Sricharan R)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH V3 4/7] ARM: DTS: DRA: Replace peripheral interrupt numbers with crossbar inputs
Date: Tue, 5 Nov 2013 18:44:14 +0530 [thread overview]
Message-ID: <1383657257-3458-5-git-send-email-r.sricharan@ti.com> (raw)
In-Reply-To: <1383657257-3458-1-git-send-email-r.sricharan@ti.com>
Now with the crossbar IP in picture, the peripherals do not have the
fixed interrupt lines. Instead they rely on the crossbar irqchip to
allocate and map a free interrupt line to its crossbar input. So replacing
all the peripheral interrupt numbers with its fixed crossbar input lines.
Cc: Benoit Cousson <bcousson@baylibre.com>
Cc: Santosh Shilimkar <santosh.shilimkar@ti.com>
Cc: Rajendra Nayak <rnayak@ti.com>
Cc: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sricharan R <r.sricharan@ti.com>
---
arch/arm/boot/dts/dra7.dtsi | 86 +++++++++++++++++++++----------------------
1 file changed, 43 insertions(+), 43 deletions(-)
diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi
index cf0d6ca..8b93b7a 100644
--- a/arch/arm/boot/dts/dra7.dtsi
+++ b/arch/arm/boot/dts/dra7.dtsi
@@ -122,10 +122,10 @@
sdma: dma-controller at 4a056000 {
compatible = "ti,omap4430-sdma";
reg = <0x4a056000 0x1000>;
- interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
#dma-cells = <1>;
#dma-channels = <32>;
#dma-requests = <127>;
@@ -134,7 +134,7 @@
gpio1: gpio at 4ae10000 {
compatible = "ti,omap4-gpio";
reg = <0x4ae10000 0x200>;
- interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "gpio1";
gpio-controller;
#gpio-cells = <2>;
@@ -145,7 +145,7 @@
gpio2: gpio at 48055000 {
compatible = "ti,omap4-gpio";
reg = <0x48055000 0x200>;
- interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "gpio2";
gpio-controller;
#gpio-cells = <2>;
@@ -156,7 +156,7 @@
gpio3: gpio at 48057000 {
compatible = "ti,omap4-gpio";
reg = <0x48057000 0x200>;
- interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "gpio3";
gpio-controller;
#gpio-cells = <2>;
@@ -167,7 +167,7 @@
gpio4: gpio at 48059000 {
compatible = "ti,omap4-gpio";
reg = <0x48059000 0x200>;
- interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "gpio4";
gpio-controller;
#gpio-cells = <2>;
@@ -178,7 +178,7 @@
gpio5: gpio at 4805b000 {
compatible = "ti,omap4-gpio";
reg = <0x4805b000 0x200>;
- interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "gpio5";
gpio-controller;
#gpio-cells = <2>;
@@ -189,7 +189,7 @@
gpio6: gpio at 4805d000 {
compatible = "ti,omap4-gpio";
reg = <0x4805d000 0x200>;
- interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "gpio6";
gpio-controller;
#gpio-cells = <2>;
@@ -200,7 +200,7 @@
gpio7: gpio at 48051000 {
compatible = "ti,omap4-gpio";
reg = <0x48051000 0x200>;
- interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "gpio7";
gpio-controller;
#gpio-cells = <2>;
@@ -211,7 +211,7 @@
gpio8: gpio at 48053000 {
compatible = "ti,omap4-gpio";
reg = <0x48053000 0x200>;
- interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "gpio8";
gpio-controller;
#gpio-cells = <2>;
@@ -222,7 +222,7 @@
uart1: serial at 4806a000 {
compatible = "ti,omap4-uart";
reg = <0x4806a000 0x100>;
- interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "uart1";
clock-frequency = <48000000>;
status = "disabled";
@@ -231,7 +231,7 @@
uart2: serial at 4806c000 {
compatible = "ti,omap4-uart";
reg = <0x4806c000 0x100>;
- interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "uart2";
clock-frequency = <48000000>;
status = "disabled";
@@ -240,7 +240,7 @@
uart3: serial at 48020000 {
compatible = "ti,omap4-uart";
reg = <0x48020000 0x100>;
- interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "uart3";
clock-frequency = <48000000>;
status = "disabled";
@@ -249,7 +249,7 @@
uart4: serial at 4806e000 {
compatible = "ti,omap4-uart";
reg = <0x4806e000 0x100>;
- interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "uart4";
clock-frequency = <48000000>;
status = "disabled";
@@ -258,7 +258,7 @@
uart5: serial at 48066000 {
compatible = "ti,omap4-uart";
reg = <0x48066000 0x100>;
- interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "uart5";
clock-frequency = <48000000>;
status = "disabled";
@@ -267,7 +267,7 @@
uart6: serial at 48068000 {
compatible = "ti,omap4-uart";
reg = <0x48068000 0x100>;
- interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "uart6";
clock-frequency = <48000000>;
status = "disabled";
@@ -308,7 +308,7 @@
timer1: timer at 4ae18000 {
compatible = "ti,omap5430-timer";
reg = <0x4ae18000 0x80>;
- interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "timer1";
ti,timer-alwon;
};
@@ -316,28 +316,28 @@
timer2: timer at 48032000 {
compatible = "ti,omap5430-timer";
reg = <0x48032000 0x80>;
- interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "timer2";
};
timer3: timer at 48034000 {
compatible = "ti,omap5430-timer";
reg = <0x48034000 0x80>;
- interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "timer3";
};
timer4: timer at 48036000 {
compatible = "ti,omap5430-timer";
reg = <0x48036000 0x80>;
- interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "timer4";
};
timer5: timer at 48820000 {
compatible = "ti,omap5430-timer";
reg = <0x48820000 0x80>;
- interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "timer5";
ti,timer-dsp;
};
@@ -345,7 +345,7 @@
timer6: timer at 48822000 {
compatible = "ti,omap5430-timer";
reg = <0x48822000 0x80>;
- interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "timer6";
ti,timer-dsp;
ti,timer-pwm;
@@ -354,7 +354,7 @@
timer7: timer at 48824000 {
compatible = "ti,omap5430-timer";
reg = <0x48824000 0x80>;
- interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "timer7";
ti,timer-dsp;
};
@@ -362,7 +362,7 @@
timer8: timer at 48826000 {
compatible = "ti,omap5430-timer";
reg = <0x48826000 0x80>;
- interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "timer8";
ti,timer-dsp;
ti,timer-pwm;
@@ -371,21 +371,21 @@
timer9: timer at 4803e000 {
compatible = "ti,omap5430-timer";
reg = <0x4803e000 0x80>;
- interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "timer9";
};
timer10: timer at 48086000 {
compatible = "ti,omap5430-timer";
reg = <0x48086000 0x80>;
- interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "timer10";
};
timer11: timer at 48088000 {
compatible = "ti,omap5430-timer";
reg = <0x48088000 0x80>;
- interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "timer11";
ti,timer-pwm;
};
@@ -421,14 +421,14 @@
wdt2: wdt at 4ae14000 {
compatible = "ti,omap4-wdt";
reg = <0x4ae14000 0x80>;
- interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "wd_timer2";
};
i2c1: i2c at 48070000 {
compatible = "ti,omap4-i2c";
reg = <0x48070000 0x100>;
- interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
ti,hwmods = "i2c1";
@@ -438,7 +438,7 @@
i2c2: i2c at 48072000 {
compatible = "ti,omap4-i2c";
reg = <0x48072000 0x100>;
- interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
ti,hwmods = "i2c2";
@@ -448,7 +448,7 @@
i2c3: i2c at 48060000 {
compatible = "ti,omap4-i2c";
reg = <0x48060000 0x100>;
- interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
ti,hwmods = "i2c3";
@@ -458,7 +458,7 @@
i2c4: i2c at 4807a000 {
compatible = "ti,omap4-i2c";
reg = <0x4807a000 0x100>;
- interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
ti,hwmods = "i2c4";
@@ -468,7 +468,7 @@
i2c5: i2c at 4807c000 {
compatible = "ti,omap4-i2c";
reg = <0x4807c000 0x100>;
- interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
ti,hwmods = "i2c5";
@@ -478,7 +478,7 @@
mmc1: mmc at 4809c000 {
compatible = "ti,omap4-hsmmc";
reg = <0x4809c000 0x400>;
- interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "mmc1";
ti,dual-volt;
ti,needs-special-reset;
@@ -490,7 +490,7 @@
mmc2: mmc at 480b4000 {
compatible = "ti,omap4-hsmmc";
reg = <0x480b4000 0x400>;
- interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "mmc2";
ti,needs-special-reset;
dmas = <&sdma 47>, <&sdma 48>;
@@ -501,7 +501,7 @@
mmc3: mmc at 480ad000 {
compatible = "ti,omap4-hsmmc";
reg = <0x480ad000 0x400>;
- interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "mmc3";
ti,needs-special-reset;
dmas = <&sdma 77>, <&sdma 78>;
@@ -512,7 +512,7 @@
mmc4: mmc at 480d1000 {
compatible = "ti,omap4-hsmmc";
reg = <0x480d1000 0x400>;
- interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "mmc4";
ti,needs-special-reset;
dmas = <&sdma 57>, <&sdma 58>;
@@ -523,7 +523,7 @@
mcspi1: spi at 48098000 {
compatible = "ti,omap4-mcspi";
reg = <0x48098000 0x200>;
- interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
ti,hwmods = "mcspi1";
@@ -544,7 +544,7 @@
mcspi2: spi at 4809a000 {
compatible = "ti,omap4-mcspi";
reg = <0x4809a000 0x200>;
- interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
ti,hwmods = "mcspi2";
@@ -560,7 +560,7 @@
mcspi3: spi at 480b8000 {
compatible = "ti,omap4-mcspi";
reg = <0x480b8000 0x200>;
- interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
ti,hwmods = "mcspi3";
@@ -573,7 +573,7 @@
mcspi4: spi at 480ba000 {
compatible = "ti,omap4-mcspi";
reg = <0x480ba000 0x200>;
- interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
ti,hwmods = "mcspi4";
--
1.7.9.5
next prev parent reply other threads:[~2013-11-05 13:14 UTC|newest]
Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-11-05 13:14 [PATCH V3 0/7] DRIVERS: IRQCHIP: Add support for crossbar IP Sricharan R
2013-11-05 13:14 ` [PATCH V3 1/7] DRIVERS: IRQCHIP: IRQ-GIC: Add support for routable irqs Sricharan R
2013-11-13 15:24 ` Santosh Shilimkar
2013-11-13 15:32 ` Sricharan R
2013-11-05 13:14 ` [PATCH V3 2/7] DRIVERS: IRQCHIP: CROSSBAR: Add support for Crossbar IP Sricharan R
2013-11-13 15:27 ` Santosh Shilimkar
2013-11-05 13:14 ` [PATCH V3 3/7] ARM: DTS: DRA: Add crossbar device binding Sricharan R
2013-11-13 15:27 ` Santosh Shilimkar
2013-11-05 13:14 ` Sricharan R [this message]
2013-11-13 15:29 ` [PATCH V3 4/7] ARM: DTS: DRA: Replace peripheral interrupt numbers with crossbar inputs Santosh Shilimkar
2013-11-05 13:14 ` [PATCH V3 5/7] ARM: DTS: DRA7: Add routable-irqs property for gic node Sricharan R
2013-11-13 15:29 ` Santosh Shilimkar
2013-11-05 13:14 ` [PATCH V3 6/7] ARM: OMAP4+: Correct Wakeup-gen code to use physical irq number Sricharan R
2013-11-13 15:29 ` Santosh Shilimkar
2013-11-05 13:14 ` [PATCH V3 7/7] ARM: DRA: Enable Crossbar IP support for DRA7XX Sricharan R
2013-11-12 5:41 ` Rajendra Nayak
2013-11-12 5:47 ` Sricharan R
2013-11-13 15:32 ` Nishanth Menon
2013-11-13 15:35 ` Sricharan R
2013-11-13 16:04 ` Santosh Shilimkar
2013-11-13 15:30 ` Santosh Shilimkar
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1383657257-3458-5-git-send-email-r.sricharan@ti.com \
--to=r.sricharan@ti.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).