From mboxrd@z Thu Jan 1 00:00:00 1970 From: shawn.guo@linaro.org (Shawn Guo) Date: Wed, 6 Nov 2013 16:03:12 +0800 Subject: [PATCH 1/2] ARM: dts: imx53-mba53: create a container for fixed regulators Message-ID: <1383724993-3731-1-git-send-email-shawn.guo@linaro.org> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org To align with others on fixed regulators bindings, it adds node 'regulators' as the container and move all regulator-fixed nodes into there. Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx53-mba53.dts | 32 ++++++++++++++++++-------------- 1 file changed, 18 insertions(+), 14 deletions(-) diff --git a/arch/arm/boot/dts/imx53-mba53.dts b/arch/arm/boot/dts/imx53-mba53.dts index ba95b78..c9ff1a5 100644 --- a/arch/arm/boot/dts/imx53-mba53.dts +++ b/arch/arm/boot/dts/imx53-mba53.dts @@ -17,14 +17,6 @@ model = "TQ MBa53 starter kit"; compatible = "tq,mba53", "tq,tqma53", "fsl,imx53"; - reg_backlight: fixed at 0 { - compatible = "regulator-fixed"; - regulator-name = "lcd-supply"; - gpio = <&gpio2 5 0>; - startup-delay-us = <5000>; - enable-active-low; - }; - backlight { compatible = "pwm-backlight"; pwms = <&pwm2 0 50000>; @@ -43,12 +35,24 @@ status = "disabled"; }; - reg_3p2v: 3p2v { - compatible = "regulator-fixed"; - regulator-name = "3P2V"; - regulator-min-microvolt = <3200000>; - regulator-max-microvolt = <3200000>; - regulator-always-on; + regulators { + compatible = "simple-bus"; + + reg_backlight: fixed at 0 { + compatible = "regulator-fixed"; + regulator-name = "lcd-supply"; + gpio = <&gpio2 5 0>; + startup-delay-us = <5000>; + enable-active-low; + }; + + reg_3p2v: 3p2v { + compatible = "regulator-fixed"; + regulator-name = "3P2V"; + regulator-min-microvolt = <3200000>; + regulator-max-microvolt = <3200000>; + regulator-always-on; + }; }; sound { -- 1.7.9.5