From mboxrd@z Thu Jan 1 00:00:00 1970 From: shc_work@mail.ru (Alexander Shiyan) Date: Sun, 10 Nov 2013 11:52:01 +0400 Subject: [PATCH 2/2] ARM: dts: imx27-phytec-phycore-som: Update FEC node In-Reply-To: <1384069921-15270-1-git-send-email-shc_work@mail.ru> References: <1384069921-15270-1-git-send-email-shc_work@mail.ru> Message-ID: <1384069921-15270-2-git-send-email-shc_work@mail.ru> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org This patch updates FEC devicetree node of Phytec PCM038 module: - Adding missing phy_mode properties. - Adding dummy regulator to provide functionality without dummy-regulator in the kernel. Signed-off-by: Alexander Shiyan --- arch/arm/boot/dts/imx27-phytec-phycore-som.dts | 16 ++++++++++++++++ 1 file changed, 16 insertions(+) diff --git a/arch/arm/boot/dts/imx27-phytec-phycore-som.dts b/arch/arm/boot/dts/imx27-phytec-phycore-som.dts index 4ec402c..317df5e 100644 --- a/arch/arm/boot/dts/imx27-phytec-phycore-som.dts +++ b/arch/arm/boot/dts/imx27-phytec-phycore-som.dts @@ -19,6 +19,20 @@ memory { reg = <0xa0000000 0x08000000>; }; + + regulators { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + reg_3v3: 3v3 { + compatible = "regulator-fixed"; + reg = <0>; + regulator-name = "3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + }; }; &audmux { @@ -134,7 +148,9 @@ }; &fec { + phy-mode = "mii"; phy-reset-gpios = <&gpio3 30 0>; + phy-supply = <®_3v3>; status = "okay"; }; -- 1.8.1.5