From: tony@atomide.com (Tony Lindgren)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 1/8] net: smc91x: Fix device tree based configuration so it's usable
Date: Wed, 13 Nov 2013 18:35:30 -0800 [thread overview]
Message-ID: <1384396537-3486-2-git-send-email-tony@atomide.com> (raw)
In-Reply-To: <1384396537-3486-1-git-send-email-tony@atomide.com>
Commit 89ce376c6bdc (drivers/net: Use of_match_ptr() macro in smc91x.c)
added minimal device tree support to smc91x, but it's not working on
many platforms because of the lack of some key configuration bits.
Fix the issue by parsing the necessary configuration like the
smc911x driver is doing.
Cc: Nicolas Pitre <nico@fluxnic.net>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: netdev at vger.kernel.org
Cc: devicetree at vger.kernel.org
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
If this looks OK, I'd like to merge this as a fix via arm-soc tree
along with the other patches in this series as my later patches
depend on patches in this series.
---
.../devicetree/bindings/net/smsc-lan91c111.txt | 4 ++
drivers/net/ethernet/smsc/smc91x.c | 52 +++++++++++++++++-----
2 files changed, 46 insertions(+), 10 deletions(-)
diff --git a/Documentation/devicetree/bindings/net/smsc-lan91c111.txt b/Documentation/devicetree/bindings/net/smsc-lan91c111.txt
index 953049b..53d69e3 100644
--- a/Documentation/devicetree/bindings/net/smsc-lan91c111.txt
+++ b/Documentation/devicetree/bindings/net/smsc-lan91c111.txt
@@ -8,3 +8,7 @@ Required properties:
Optional properties:
- phy-device : phandle to Ethernet phy
- local-mac-address : Ethernet mac address to use
+- reg-io-width : Specify the size (in bytes) of the IO accesses that
+ should be performed on the device. Valid value for SMSC LAN is
+ 1, 2 or 4. If it's omitted or invalid, the size would be 2.
+- smsc,nowait : Setup for fast register access with no waits
diff --git a/drivers/net/ethernet/smsc/smc91x.c b/drivers/net/ethernet/smsc/smc91x.c
index 73be7f3..93d4b7d 100644
--- a/drivers/net/ethernet/smsc/smc91x.c
+++ b/drivers/net/ethernet/smsc/smc91x.c
@@ -82,6 +82,7 @@ static const char version[] =
#include <linux/mii.h>
#include <linux/workqueue.h>
#include <linux/of.h>
+#include <linux/of_device.h>
#include <linux/netdevice.h>
#include <linux/etherdevice.h>
@@ -2189,6 +2190,15 @@ static void smc_release_datacs(struct platform_device *pdev, struct net_device *
}
}
+#if IS_BUILTIN(CONFIG_OF)
+static const struct of_device_id smc91x_match[] = {
+ { .compatible = "smsc,lan91c94", },
+ { .compatible = "smsc,lan91c111", },
+ {},
+};
+MODULE_DEVICE_TABLE(of, smc91x_match);
+#endif
+
/*
* smc_init(void)
* Input parameters:
@@ -2203,6 +2213,8 @@ static void smc_release_datacs(struct platform_device *pdev, struct net_device *
static int smc_drv_probe(struct platform_device *pdev)
{
struct smc91x_platdata *pd = dev_get_platdata(&pdev->dev);
+ struct device_node *np = pdev->dev.of_node;
+ const struct of_device_id *match = NULL;
struct smc_local *lp;
struct net_device *ndev;
struct resource *res, *ires;
@@ -2222,11 +2234,40 @@ static int smc_drv_probe(struct platform_device *pdev)
*/
lp = netdev_priv(ndev);
+ lp->cfg.flags = 0;
if (pd) {
memcpy(&lp->cfg, pd, sizeof(lp->cfg));
lp->io_shift = SMC91X_IO_SHIFT(lp->cfg.flags);
- } else {
+ }
+
+#if IS_BUILTIN(CONFIG_OF)
+ match = of_match_device(of_match_ptr(smc91x_match), &pdev->dev);
+ if (match) {
+ u32 val;
+
+ of_property_read_u32(np, "reg-io-width", &val);
+ switch (val) {
+ case 1:
+ lp->cfg.flags |= SMC91X_USE_8BIT;
+ break;
+ case 2:
+ lp->cfg.flags |= SMC91X_USE_16BIT;
+ break;
+ case 4:
+ lp->cfg.flags |= SMC91X_USE_32BIT;
+ break;
+ default:
+ lp->cfg.flags |= SMC91X_USE_16BIT;
+ break;
+ }
+
+ if (of_get_property(np, "smsc,nowait", NULL))
+ lp->cfg.flags |= SMC91X_NOWAIT;
+ }
+#endif
+
+ if (!pd && !match) {
lp->cfg.flags |= (SMC_CAN_USE_8BIT) ? SMC91X_USE_8BIT : 0;
lp->cfg.flags |= (SMC_CAN_USE_16BIT) ? SMC91X_USE_16BIT : 0;
lp->cfg.flags |= (SMC_CAN_USE_32BIT) ? SMC91X_USE_32BIT : 0;
@@ -2375,15 +2416,6 @@ static int smc_drv_resume(struct device *dev)
return 0;
}
-#ifdef CONFIG_OF
-static const struct of_device_id smc91x_match[] = {
- { .compatible = "smsc,lan91c94", },
- { .compatible = "smsc,lan91c111", },
- {},
-};
-MODULE_DEVICE_TABLE(of, smc91x_match);
-#endif
-
static struct dev_pm_ops smc_drv_pm_ops = {
.suspend = smc_drv_suspend,
.resume = smc_drv_resume,
--
1.8.1.1
next prev parent reply other threads:[~2013-11-14 2:35 UTC|newest]
Thread overview: 49+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-11-14 2:35 [PATCH 0/8] Various omap device tree usability fixes for v3.13 merge window Tony Lindgren
2013-11-14 2:35 ` Tony Lindgren [this message]
2013-11-14 11:03 ` [PATCH 1/8] net: smc91x: Fix device tree based configuration so it's usable Mark Rutland
2013-11-14 16:08 ` Tony Lindgren
2013-11-16 15:16 ` Tony Lindgren
2013-11-27 18:36 ` Tony Lindgren
2013-11-14 2:35 ` [PATCH 2/8] mmc: omap: Fix DMA configuration to not rely on device id Tony Lindgren
2013-11-18 18:47 ` Tony Lindgren
2013-11-26 23:33 ` Chris Ball
2013-11-26 23:52 ` Tony Lindgren
2013-11-27 20:57 ` Jarkko Nikula
2013-11-27 21:37 ` Tony Lindgren
2013-11-28 17:02 ` Jarkko Nikula
2013-11-29 16:34 ` Tony Lindgren
2013-11-27 21:47 ` Chris Ball
2013-11-27 21:59 ` Tony Lindgren
2013-11-28 16:13 ` Jarkko Nikula
2013-11-29 17:13 ` Tony Lindgren
2013-11-30 0:38 ` Joel Fernandes
2013-11-30 17:33 ` Tony Lindgren
2013-11-14 2:35 ` [PATCH 3/8] mmc: omap: Fix I2C dependency and make driver usable with device tree Tony Lindgren
2013-11-14 11:05 ` Mark Rutland
2013-11-14 17:25 ` Tony Lindgren
2013-11-26 23:34 ` Chris Ball
2013-11-14 2:35 ` [PATCH 4/8] i2c: omap: Fix missing device tree flags for omap2 Tony Lindgren
2013-11-14 6:58 ` Wolfram Sang
2013-11-14 17:34 ` Tony Lindgren
2013-11-14 17:49 ` Wolfram Sang
2013-11-14 17:53 ` Tony Lindgren
2013-11-14 11:07 ` Mark Rutland
2013-11-14 17:30 ` Tony Lindgren
2013-11-14 2:35 ` [PATCH 5/8] gpio: twl4030: Fix regression for twl gpio output Tony Lindgren
2013-11-14 9:45 ` Peter Ujfalusi
2013-11-14 17:37 ` Tony Lindgren
2013-11-18 22:45 ` Linus Walleij
2013-12-03 13:30 ` Roger Quadros
2013-12-09 13:09 ` Linus Walleij
2013-12-09 17:10 ` Tony Lindgren
2013-12-10 12:17 ` Linus Walleij
2013-12-10 15:20 ` Tony Lindgren
2013-11-14 2:35 ` [PATCH 6/8] gpio: twl4030: Fix passing of pdata in the device tree case Tony Lindgren
2013-11-18 18:27 ` Tony Lindgren
2013-11-18 22:46 ` Linus Walleij
2013-11-14 2:35 ` [PATCH 7/8] ARM: OMAP2+: Fix GPMC and simplify bootloader timings for 8250 and smc91x Tony Lindgren
2013-11-14 2:35 ` [PATCH 8/8] ARM: dts: Fix omap2 specific dtsi files by adding the missing entries Tony Lindgren
2013-11-14 23:08 ` [PATCH 9/8] i2c: Fix device tree binding for i2c-cbus-gpio Tony Lindgren
2013-11-15 18:49 ` Aaro Koskinen
2013-11-15 22:26 ` Wolfram Sang
2013-11-15 22:30 ` Tony Lindgren
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1384396537-3486-2-git-send-email-tony@atomide.com \
--to=tony@atomide.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).