From: tony@atomide.com (Tony Lindgren)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 3/8] mmc: omap: Fix I2C dependency and make driver usable with device tree
Date: Wed, 13 Nov 2013 18:35:32 -0800 [thread overview]
Message-ID: <1384396537-3486-4-git-send-email-tony@atomide.com> (raw)
In-Reply-To: <1384396537-3486-1-git-send-email-tony@atomide.com>
Some features can be configured by the companion I2C chips,
which may not be available at the probe time. Fix the issue
by returning -EPROBE_DEFER when the MMC controller slots
are not configured.
While at it, let's also add minimal device tree support so
omap24xx platforms can use this driver without legacy mode
since we claim to support device tree for mach-omap2 based
systems.
Although adding the minimal device tree support is not strictly
a fix, it does remove one of the last blockers for dropping a
bunch of legacy platform data for mach-omap2.
Cc: Chris Ball <cjb@laptop.org>
Cc: linux-mmc at vger.kernel.org
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
If this looks OK, I'd like to merge this as a fix via arm-soc tree
along with the other patches in this series as my later patches
depend on patches in this series.
---
drivers/mmc/host/omap.c | 10 +++++++++-
1 file changed, 9 insertions(+), 1 deletion(-)
diff --git a/drivers/mmc/host/omap.c b/drivers/mmc/host/omap.c
index ed56868..43c66ad 100644
--- a/drivers/mmc/host/omap.c
+++ b/drivers/mmc/host/omap.c
@@ -22,6 +22,7 @@
#include <linux/delay.h>
#include <linux/spinlock.h>
#include <linux/timer.h>
+#include <linux/of.h>
#include <linux/omap-dma.h>
#include <linux/mmc/host.h>
#include <linux/mmc/card.h>
@@ -1330,7 +1331,7 @@ static int mmc_omap_probe(struct platform_device *pdev)
}
if (pdata->nr_slots == 0) {
dev_err(&pdev->dev, "no slots\n");
- return -ENXIO;
+ return -EPROBE_DEFER;
}
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
@@ -1553,6 +1554,12 @@ static int mmc_omap_resume(struct platform_device *pdev)
#define mmc_omap_resume NULL
#endif
+#if IS_BUILTIN(CONFIG_OF)
+static const struct of_device_id mmc_omap_match[] = {
+ { .compatible = "ti,omap2420-mmc", },
+ { },
+};
+#endif
static struct platform_driver mmc_omap_driver = {
.probe = mmc_omap_probe,
.remove = mmc_omap_remove,
@@ -1561,6 +1568,7 @@ static struct platform_driver mmc_omap_driver = {
.driver = {
.name = DRIVER_NAME,
.owner = THIS_MODULE,
+ .of_match_table = of_match_ptr(mmc_omap_match),
},
};
--
1.8.1.1
next prev parent reply other threads:[~2013-11-14 2:35 UTC|newest]
Thread overview: 49+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-11-14 2:35 [PATCH 0/8] Various omap device tree usability fixes for v3.13 merge window Tony Lindgren
2013-11-14 2:35 ` [PATCH 1/8] net: smc91x: Fix device tree based configuration so it's usable Tony Lindgren
2013-11-14 11:03 ` Mark Rutland
2013-11-14 16:08 ` Tony Lindgren
2013-11-16 15:16 ` Tony Lindgren
2013-11-27 18:36 ` Tony Lindgren
2013-11-14 2:35 ` [PATCH 2/8] mmc: omap: Fix DMA configuration to not rely on device id Tony Lindgren
2013-11-18 18:47 ` Tony Lindgren
2013-11-26 23:33 ` Chris Ball
2013-11-26 23:52 ` Tony Lindgren
2013-11-27 20:57 ` Jarkko Nikula
2013-11-27 21:37 ` Tony Lindgren
2013-11-28 17:02 ` Jarkko Nikula
2013-11-29 16:34 ` Tony Lindgren
2013-11-27 21:47 ` Chris Ball
2013-11-27 21:59 ` Tony Lindgren
2013-11-28 16:13 ` Jarkko Nikula
2013-11-29 17:13 ` Tony Lindgren
2013-11-30 0:38 ` Joel Fernandes
2013-11-30 17:33 ` Tony Lindgren
2013-11-14 2:35 ` Tony Lindgren [this message]
2013-11-14 11:05 ` [PATCH 3/8] mmc: omap: Fix I2C dependency and make driver usable with device tree Mark Rutland
2013-11-14 17:25 ` Tony Lindgren
2013-11-26 23:34 ` Chris Ball
2013-11-14 2:35 ` [PATCH 4/8] i2c: omap: Fix missing device tree flags for omap2 Tony Lindgren
2013-11-14 6:58 ` Wolfram Sang
2013-11-14 17:34 ` Tony Lindgren
2013-11-14 17:49 ` Wolfram Sang
2013-11-14 17:53 ` Tony Lindgren
2013-11-14 11:07 ` Mark Rutland
2013-11-14 17:30 ` Tony Lindgren
2013-11-14 2:35 ` [PATCH 5/8] gpio: twl4030: Fix regression for twl gpio output Tony Lindgren
2013-11-14 9:45 ` Peter Ujfalusi
2013-11-14 17:37 ` Tony Lindgren
2013-11-18 22:45 ` Linus Walleij
2013-12-03 13:30 ` Roger Quadros
2013-12-09 13:09 ` Linus Walleij
2013-12-09 17:10 ` Tony Lindgren
2013-12-10 12:17 ` Linus Walleij
2013-12-10 15:20 ` Tony Lindgren
2013-11-14 2:35 ` [PATCH 6/8] gpio: twl4030: Fix passing of pdata in the device tree case Tony Lindgren
2013-11-18 18:27 ` Tony Lindgren
2013-11-18 22:46 ` Linus Walleij
2013-11-14 2:35 ` [PATCH 7/8] ARM: OMAP2+: Fix GPMC and simplify bootloader timings for 8250 and smc91x Tony Lindgren
2013-11-14 2:35 ` [PATCH 8/8] ARM: dts: Fix omap2 specific dtsi files by adding the missing entries Tony Lindgren
2013-11-14 23:08 ` [PATCH 9/8] i2c: Fix device tree binding for i2c-cbus-gpio Tony Lindgren
2013-11-15 18:49 ` Aaro Koskinen
2013-11-15 22:26 ` Wolfram Sang
2013-11-15 22:30 ` Tony Lindgren
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1384396537-3486-4-git-send-email-tony@atomide.com \
--to=tony@atomide.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).