From mboxrd@z Thu Jan 1 00:00:00 1970 From: tim.kryger@linaro.org (Tim Kryger) Date: Thu, 14 Nov 2013 11:10:41 -0800 Subject: [PATCH v3 6/8] Documentation: dt: kona-timer: Add clocks property In-Reply-To: <1384456243-27053-1-git-send-email-tim.kryger@linaro.org> References: <1384456243-27053-1-git-send-email-tim.kryger@linaro.org> Message-ID: <1384456243-27053-7-git-send-email-tim.kryger@linaro.org> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org The frequency for the Kona timer can either be specified through the device tree or determined by checking the rate of the clock specified in the device tree. Update the documentation to reflect both ways. Signed-off-by: Tim Kryger Reviewed-by: Matt Porter --- Documentation/devicetree/bindings/arm/bcm/kona-timer.txt | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) diff --git a/Documentation/devicetree/bindings/arm/bcm/kona-timer.txt b/Documentation/devicetree/bindings/arm/bcm/kona-timer.txt index 17d88b2..b84e184 100644 --- a/Documentation/devicetree/bindings/arm/bcm/kona-timer.txt +++ b/Documentation/devicetree/bindings/arm/bcm/kona-timer.txt @@ -8,13 +8,19 @@ Required properties: - DEPRECATED: compatible : "bcm,kona-timer" - reg : Register range for the timer - interrupts : interrupt for the timer +- clocks: clock specifier for the kona i2c external clock - clock-frequency: frequency that the clock operates +Only one of clocks or clock-frequency should be specified. + +Refer to clocks/clock-bindings.txt for generic clock consumer +properties. + Example: timer at 35006000 { compatible = "brcm,kona-timer"; reg = <0x35006000 0x1000>; interrupts = <0x0 7 0x4>; - clock-frequency = <32768>; + clocks = <&hub_timer_clk>; }; -- 1.8.0.1