[PATCH 1/2] ARM: kirkwood: provide pinctrl default to sdio nodes

[sebastian.hesselbarth@gmail.com (Sebastian Hesselbarth)]

SDIO controllers found on Marvell Kirkwood 6281/6282 SoCs require
pins to be muxed by pinctrl. As there is only one sane pinctrl
setting for this, provide default pinctrl properties to the controller
nodes.

Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
---
I am not sending this two patches to each DT maintainer, as it is a
Kirkwood only thing, added the dt list for completeness.

Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: devicetree at vger.kernel.org
Cc: linux-arm-kernel at lists.infradead.org
Cc: linux-kernel at vger.kernel.org
---
 arch/arm/boot/dts/kirkwood-6281.dtsi |    2 ++
 arch/arm/boot/dts/kirkwood-6282.dtsi |    2 ++
 2 files changed, 4 insertions(+), 0 deletions(-)

diff --git a/arch/arm/boot/dts/kirkwood-6281.dtsi b/arch/arm/boot/dts/kirkwood-6281.dtsi
index 650ef30..e4e1968 100644
--- a/arch/arm/boot/dts/kirkwood-6281.dtsi
+++ b/arch/arm/boot/dts/kirkwood-6281.dtsi
@@ -97,6 +97,8 @@
 			reg = <0x90000 0x200>;
 			interrupts = <28>;
 			clocks = <&gate_clk 4>;
+			pinctrl-0 = <&pmx_sdio>;
+			pinctrl-names = "default";
 			bus-width = <4>;
 			cap-sdio-irq;
 			cap-sd-highspeed;
diff --git a/arch/arm/boot/dts/kirkwood-6282.dtsi b/arch/arm/boot/dts/kirkwood-6282.dtsi
index 3933a33..f010c21 100644
--- a/arch/arm/boot/dts/kirkwood-6282.dtsi
+++ b/arch/arm/boot/dts/kirkwood-6282.dtsi
@@ -125,6 +125,8 @@
 			reg = <0x90000 0x200>;
 			interrupts = <28>;
 			clocks = <&gate_clk 4>;
+			pinctrl-0 = <&pmx_sdio>;
+			pinctrl-names = "default";
 			bus-width = <4>;
 			cap-sdio-irq;
 			cap-sd-highspeed;
-- 
1.7.2.5