From: mpa@pengutronix.de (Markus Pargmann)
To: linux-arm-kernel@lists.infradead.org
Subject: [RFC 0/9] ASoC: fsl-ssi: offline/online configuration and cleanups
Date: Fri, 15 Nov 2013 16:49:35 +0100 [thread overview]
Message-ID: <1384530584-31273-1-git-send-email-mpa@pengutronix.de> (raw)
Hi,
This patch series fixes some fsl-ssi code that does not act exactly as it is
described in the reference manuals.
The reference manuals before imx50 do mention that some register bits,
including TDMAE/RDMAE, should not be changed while the SSI unit is enabled
(SSIEN). At the same time the SDMA unit has a undefined request handling if
there are DMA requests before the SDMA engine and its channel is configured.
The reference manual states that SSI DMA requests are sent as soon as the FIFO
and the DMAE bits are enabled. It does not mention a dependency to SCR's TE/RE
bit.
To avoid sending DMA requests before a channel is configured, we have to
seperate the fsl-ssi behavior into offline and online configuration. SoCs
before imx50 have to use offline configuration while later SoC versions can use
online reconfiguration.
This series adds support for online configuration and cleans up the
configuration register code especially in fsl_ssi_trigger. At the end we have a
seperation between enable/disable logic and the actual configuration register
values used to enable/disable TX/RX.
I tested this series on mx53.
Regards,
Markus
Markus Pargmann (9):
ASoC: fsl-ssi: Drop AC97 debug register usage
ASoC: fsl-ssi: Move ac97 specific setup to seperate function
ASoC: fsl-ssi: Move sysfs stats to debugfs
ASoC: fsl-ssi: Add imx50-ssi and of_device_id matching
ASoC: fsl-ssi: Add offline_config flag
ASoC: fsl-ssi: Add configuration helper functions
ASoC: fsl-ssi: Move RX/TX configuration to seperate functions
ASoC: fsl-ssi: Drop ac97 specific trigger function
ARM: DTS: imx5* imx6*, use imx50-ssi
arch/arm/boot/dts/imx51.dtsi | 6 +-
arch/arm/boot/dts/imx53.dtsi | 6 +-
arch/arm/boot/dts/imx6qdl.dtsi | 6 +-
arch/arm/boot/dts/imx6sl.dtsi | 6 +-
sound/soc/fsl/fsl_ssi.c | 580 ++++++++++++++++++++++++++---------------
5 files changed, 389 insertions(+), 215 deletions(-)
--
1.8.4.2
next reply other threads:[~2013-11-15 15:49 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-11-15 15:49 Markus Pargmann [this message]
[not found] ` <1384530584-31273-5-git-send-email-mpa@pengutronix.de>
2013-11-18 1:38 ` [RFC 4/9] ASoC: fsl-ssi: Add imx50-ssi and of_device_id matching Shawn Guo
[not found] ` <1384530584-31273-10-git-send-email-mpa@pengutronix.de>
2013-11-18 2:02 ` [RFC 9/9] ARM: DTS: imx5* imx6*, use imx50-ssi Shawn Guo
2013-11-18 13:42 ` Markus Pargmann
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1384530584-31273-1-git-send-email-mpa@pengutronix.de \
--to=mpa@pengutronix.de \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).