From mboxrd@z Thu Jan  1 00:00:00 1970
From: tony@atomide.com (Tony Lindgren)
Date: Fri, 15 Nov 2013 16:36:07 -0800
Subject: [PATCH 5/5] ARM: OMAP2+: Remove legacy booting support for LDP
In-Reply-To: <1384562167-14725-1-git-send-email-tony@atomide.com>
References: <1384562167-14725-1-git-send-email-tony@atomide.com>
Message-ID: <1384562167-14725-6-git-send-email-tony@atomide.com>
To: linux-arm-kernel@lists.infradead.org
List-Id: linux-arm-kernel.lists.infradead.org

We can now boot with appended device tree with pretty much
the same functionality. So let's remove the legacy board
file as we want to make mach-omap2 device tree only.

Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/mach-omap2/Kconfig     |   6 -
 arch/arm/mach-omap2/Makefile    |   1 -
 arch/arm/mach-omap2/board-ldp.c | 425 ----------------------------------------
 3 files changed, 432 deletions(-)
 delete mode 100644 arch/arm/mach-omap2/board-ldp.c

diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig
index 4191ae0..0f7952d 100644
--- a/arch/arm/mach-omap2/Kconfig
+++ b/arch/arm/mach-omap2/Kconfig
@@ -204,12 +204,6 @@ config MACH_DEVKIT8000
 	default y
 	select OMAP_PACKAGE_CUS
 
-config MACH_OMAP_LDP
-	bool "OMAP3 LDP board"
-	depends on ARCH_OMAP3
-	default y
-	select OMAP_PACKAGE_CBB
-
 config MACH_OMAP3530_LV_SOM
 	bool "OMAP3 Logic 3530 LV SOM board"
 	depends on ARCH_OMAP3
diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile
index 83b147e..6a280f8 100644
--- a/arch/arm/mach-omap2/Makefile
+++ b/arch/arm/mach-omap2/Makefile
@@ -237,7 +237,6 @@ obj-$(CONFIG_SOC_OMAP2420)		+= msdi.o
 obj-$(CONFIG_MACH_OMAP_GENERIC)		+= board-generic.o pdata-quirks.o
 obj-$(CONFIG_MACH_OMAP3_BEAGLE)		+= board-omap3beagle.o
 obj-$(CONFIG_MACH_DEVKIT8000)     	+= board-devkit8000.o
-obj-$(CONFIG_MACH_OMAP_LDP)		+= board-ldp.o
 obj-$(CONFIG_MACH_OMAP3530_LV_SOM)      += board-omap3logic.o
 obj-$(CONFIG_MACH_OMAP3_TORPEDO)        += board-omap3logic.o
 obj-$(CONFIG_MACH_OVERO)		+= board-overo.o
diff --git a/arch/arm/mach-omap2/board-ldp.c b/arch/arm/mach-omap2/board-ldp.c
deleted file mode 100644
index 4ec8d82..0000000
--- a/arch/arm/mach-omap2/board-ldp.c
+++ /dev/null
@@ -1,425 +0,0 @@
-/*
- * linux/arch/arm/mach-omap2/board-ldp.c
- *
- * Copyright (C) 2008 Texas Instruments Inc.
- * Nishant Kamat <nskamat@ti.com>
- *
- * Modified from mach-omap2/board-3430sdp.c
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <linux/gpio.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/delay.h>
-#include <linux/input.h>
-#include <linux/input/matrix_keypad.h>
-#include <linux/gpio_keys.h>
-#include <linux/workqueue.h>
-#include <linux/err.h>
-#include <linux/clk.h>
-#include <linux/spi/spi.h>
-#include <linux/regulator/fixed.h>
-#include <linux/regulator/machine.h>
-#include <linux/i2c/twl.h>
-#include <linux/io.h>
-#include <linux/smsc911x.h>
-#include <linux/mmc/host.h>
-#include <linux/usb/phy.h>
-#include <linux/platform_data/spi-omap2-mcspi.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-
-#include "common.h"
-#include "gpmc.h"
-#include "gpmc-smsc911x.h"
-
-#include <video/omapdss.h>
-#include <video/omap-panel-data.h>
-
-#include "board-flash.h"
-#include "mux.h"
-#include "hsmmc.h"
-#include "control.h"
-#include "common-board-devices.h"
-
-#define LDP_SMSC911X_CS		1
-#define LDP_SMSC911X_GPIO	152
-#define DEBUG_BASE		0x08000000
-#define LDP_ETHR_START		DEBUG_BASE
-
-static uint32_t board_keymap[] = {
-	KEY(0, 0, KEY_1),
-	KEY(1, 0, KEY_2),
-	KEY(2, 0, KEY_3),
-	KEY(0, 1, KEY_4),
-	KEY(1, 1, KEY_5),
-	KEY(2, 1, KEY_6),
-	KEY(3, 1, KEY_F5),
-	KEY(0, 2, KEY_7),
-	KEY(1, 2, KEY_8),
-	KEY(2, 2, KEY_9),
-	KEY(3, 2, KEY_F6),
-	KEY(0, 3, KEY_F7),
-	KEY(1, 3, KEY_0),
-	KEY(2, 3, KEY_F8),
-	PERSISTENT_KEY(4, 5),
-	KEY(4, 4, KEY_VOLUMEUP),
-	KEY(5, 5, KEY_VOLUMEDOWN),
-	0
-};
-
-static struct matrix_keymap_data board_map_data = {
-	.keymap			= board_keymap,
-	.keymap_size		= ARRAY_SIZE(board_keymap),
-};
-
-static struct twl4030_keypad_data ldp_kp_twl4030_data = {
-	.keymap_data	= &board_map_data,
-	.rows		= 6,
-	.cols		= 6,
-	.rep		= 1,
-};
-
-static struct gpio_keys_button ldp_gpio_keys_buttons[] = {
-	[0] = {
-		.code			= KEY_ENTER,
-		.gpio			= 101,
-		.desc			= "enter sw",
-		.active_low		= 1,
-		.debounce_interval	= 30,
-	},
-	[1] = {
-		.code			= KEY_F1,
-		.gpio			= 102,
-		.desc			= "func 1",
-		.active_low		= 1,
-		.debounce_interval	= 30,
-	},
-	[2] = {
-		.code			= KEY_F2,
-		.gpio			= 103,
-		.desc			= "func 2",
-		.active_low		= 1,
-		.debounce_interval	= 30,
-	},
-	[3] = {
-		.code			= KEY_F3,
-		.gpio			= 104,
-		.desc			= "func 3",
-		.active_low		= 1,
-		.debounce_interval 	= 30,
-	},
-	[4] = {
-		.code			= KEY_F4,
-		.gpio			= 105,
-		.desc			= "func 4",
-		.active_low		= 1,
-		.debounce_interval	= 30,
-	},
-	[5] = {
-		.code			= KEY_LEFT,
-		.gpio			= 106,
-		.desc			= "left sw",
-		.active_low		= 1,
-		.debounce_interval	= 30,
-	},
-	[6] = {
-		.code			= KEY_RIGHT,
-		.gpio			= 107,
-		.desc			= "right sw",
-		.active_low		= 1,
-		.debounce_interval	= 30,
-	},
-	[7] = {
-		.code			= KEY_UP,
-		.gpio			= 108,
-		.desc			= "up sw",
-		.active_low		= 1,
-		.debounce_interval	= 30,
-	},
-	[8] = {
-		.code			= KEY_DOWN,
-		.gpio			= 109,
-		.desc			= "down sw",
-		.active_low		= 1,
-		.debounce_interval	= 30,
-	},
-};
-
-static struct gpio_keys_platform_data ldp_gpio_keys = {
-	.buttons		= ldp_gpio_keys_buttons,
-	.nbuttons		= ARRAY_SIZE(ldp_gpio_keys_buttons),
-	.rep			= 1,
-};
-
-static struct platform_device ldp_gpio_keys_device = {
-	.name		= "gpio-keys",
-	.id		= -1,
-	.dev		= {
-		.platform_data	= &ldp_gpio_keys,
-	},
-};
-
-static struct omap_smsc911x_platform_data smsc911x_cfg = {
-	.cs             = LDP_SMSC911X_CS,
-	.gpio_irq       = LDP_SMSC911X_GPIO,
-	.gpio_reset     = -EINVAL,
-	.flags		= SMSC911X_USE_32BIT,
-};
-
-static inline void __init ldp_init_smsc911x(void)
-{
-	gpmc_smsc911x_init(&smsc911x_cfg);
-}
-
-/* LCD */
-
-#define LCD_PANEL_RESET_GPIO		55
-#define LCD_PANEL_QVGA_GPIO		56
-
-static const struct display_timing ldp_lcd_videomode = {
-	.pixelclock	= { 0, 5400000, 0 },
-
-	.hactive = { 0, 240, 0 },
-	.hfront_porch = { 0, 3, 0 },
-	.hback_porch = { 0, 39, 0 },
-	.hsync_len = { 0, 3, 0 },
-
-	.vactive = { 0, 320, 0 },
-	.vfront_porch = { 0, 2, 0 },
-	.vback_porch = { 0, 7, 0 },
-	.vsync_len = { 0, 1, 0 },
-
-	.flags = DISPLAY_FLAGS_HSYNC_LOW | DISPLAY_FLAGS_VSYNC_LOW |
-		DISPLAY_FLAGS_DE_HIGH | DISPLAY_FLAGS_PIXDATA_POSEDGE,
-};
-
-static struct panel_dpi_platform_data ldp_lcd_pdata = {
-	.name                   = "lcd",
-	.source                 = "dpi.0",
-
-	.data_lines		= 18,
-
-	.display_timing		= &ldp_lcd_videomode,
-
-	.enable_gpio		= -1,	/* filled in code */
-	.backlight_gpio		= -1,	/* filled in code */
-};
-
-static struct platform_device ldp_lcd_device = {
-	.name                   = "panel-dpi",
-	.id                     = 0,
-	.dev.platform_data      = &ldp_lcd_pdata,
-};
-
-static struct omap_dss_board_info ldp_dss_data = {
-	.default_display_name = "lcd",
-};
-
-static void __init ldp_display_init(void)
-{
-	int r;
-
-	static struct gpio gpios[] __initdata = {
-		{LCD_PANEL_RESET_GPIO, GPIOF_OUT_INIT_HIGH, "LCD RESET"},
-		{LCD_PANEL_QVGA_GPIO, GPIOF_OUT_INIT_HIGH, "LCD QVGA"},
-	};
-
-	r = gpio_request_array(gpios, ARRAY_SIZE(gpios));
-	if (r) {
-		pr_err("Cannot request LCD GPIOs, error %d\n", r);
-		return;
-	}
-
-	omap_display_init(&ldp_dss_data);
-}
-
-static int ldp_twl_gpio_setup(struct device *dev, unsigned gpio, unsigned ngpio)
-{
-	/* LCD enable GPIO */
-	ldp_lcd_pdata.enable_gpio = gpio + 7;
-
-	/* Backlight enable GPIO */
-	ldp_lcd_pdata.backlight_gpio = gpio + 15;
-
-	return 0;
-}
-
-static struct twl4030_gpio_platform_data ldp_gpio_data = {
-	.setup		= ldp_twl_gpio_setup,
-};
-
-static struct regulator_consumer_supply ldp_vmmc1_supply[] = {
-	REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0"),
-};
-
-/* VMMC1 for MMC1 pins CMD, CLK, DAT0..DAT3 (20 mA, plus card == max 220 mA) */
-static struct regulator_init_data ldp_vmmc1 = {
-	.constraints = {
-		.min_uV			= 1850000,
-		.max_uV			= 3150000,
-		.valid_modes_mask	= REGULATOR_MODE_NORMAL
-					| REGULATOR_MODE_STANDBY,
-		.valid_ops_mask		= REGULATOR_CHANGE_VOLTAGE
-					| REGULATOR_CHANGE_MODE
-					| REGULATOR_CHANGE_STATUS,
-	},
-	.num_consumer_supplies	= ARRAY_SIZE(ldp_vmmc1_supply),
-	.consumer_supplies	= ldp_vmmc1_supply,
-};
-
-/* ads7846 on SPI */
-static struct regulator_consumer_supply ldp_vaux1_supplies[] = {
-	REGULATOR_SUPPLY("vcc", "spi1.0"),
-};
-
-/* VAUX1 */
-static struct regulator_init_data ldp_vaux1 = {
-	.constraints = {
-		.min_uV			= 3000000,
-		.max_uV			= 3000000,
-		.apply_uV		= true,
-		.valid_modes_mask	= REGULATOR_MODE_NORMAL
-					| REGULATOR_MODE_STANDBY,
-		.valid_ops_mask		= REGULATOR_CHANGE_MODE
-					| REGULATOR_CHANGE_STATUS,
-	},
-	.num_consumer_supplies		= ARRAY_SIZE(ldp_vaux1_supplies),
-	.consumer_supplies		= ldp_vaux1_supplies,
-};
-
-static struct regulator_consumer_supply ldp_vpll2_supplies[] = {
-	REGULATOR_SUPPLY("vdds_dsi", "omapdss"),
-	REGULATOR_SUPPLY("vdds_dsi", "omapdss_dpi.0"),
-	REGULATOR_SUPPLY("vdds_dsi", "omapdss_dsi.0"),
-};
-
-static struct regulator_init_data ldp_vpll2 = {
-	.constraints = {
-		.name			= "VDVI",
-		.min_uV			= 1800000,
-		.max_uV			= 1800000,
-		.apply_uV		= true,
-		.valid_modes_mask	= REGULATOR_MODE_NORMAL
-					| REGULATOR_MODE_STANDBY,
-		.valid_ops_mask		= REGULATOR_CHANGE_MODE
-					| REGULATOR_CHANGE_STATUS,
-	},
-	.num_consumer_supplies	= ARRAY_SIZE(ldp_vpll2_supplies),
-	.consumer_supplies	= ldp_vpll2_supplies,
-};
-
-static struct twl4030_platform_data ldp_twldata = {
-	/* platform_data for children goes here */
-	.vmmc1		= &ldp_vmmc1,
-	.vaux1		= &ldp_vaux1,
-	.vpll2		= &ldp_vpll2,
-	.gpio		= &ldp_gpio_data,
-	.keypad		= &ldp_kp_twl4030_data,
-};
-
-static int __init omap_i2c_init(void)
-{
-	omap3_pmic_get_config(&ldp_twldata,
-			  TWL_COMMON_PDATA_USB | TWL_COMMON_PDATA_MADC, 0);
-	omap3_pmic_init("twl4030", &ldp_twldata);
-	omap_register_i2c_bus(2, 400, NULL, 0);
-	omap_register_i2c_bus(3, 400, NULL, 0);
-	return 0;
-}
-
-static struct omap2_hsmmc_info mmc[] __initdata = {
-	{
-		.mmc		= 1,
-		.caps		= MMC_CAP_4_BIT_DATA,
-		.gpio_cd	= -EINVAL,
-		.gpio_wp	= -EINVAL,
-	},
-	{}	/* Terminator */
-};
-
-static struct platform_device *ldp_devices[] __initdata = {
-	&ldp_gpio_keys_device,
-	&ldp_lcd_device,
-};
-
-#ifdef CONFIG_OMAP_MUX
-static struct omap_board_mux board_mux[] __initdata = {
-	{ .reg_offset = OMAP_MUX_TERMINATOR },
-};
-#endif
-
-static struct mtd_partition ldp_nand_partitions[] = {
-	/* All the partition sizes are listed in terms of NAND block size */
-	{
-		.name		= "X-Loader-NAND",
-		.offset		= 0,
-		.size		= 4 * (64 * 2048),	/* 512KB, 0x80000 */
-		.mask_flags	= MTD_WRITEABLE,	/* force read-only */
-	},
-	{
-		.name		= "U-Boot-NAND",
-		.offset		= MTDPART_OFS_APPEND,	/* Offset = 0x80000 */
-		.size		= 10 * (64 * 2048),	/* 1.25MB, 0x140000 */
-		.mask_flags	= MTD_WRITEABLE,	/* force read-only */
-	},
-	{
-		.name		= "Boot Env-NAND",
-		.offset		= MTDPART_OFS_APPEND,   /* Offset = 0x1c0000 */
-		.size		= 2 * (64 * 2048),	/* 256KB, 0x40000 */
-	},
-	{
-		.name		= "Kernel-NAND",
-		.offset		= MTDPART_OFS_APPEND,	/* Offset = 0x0200000*/
-		.size		= 240 * (64 * 2048),	/* 30M, 0x1E00000 */
-	},
-	{
-		.name		= "File System - NAND",
-		.offset		= MTDPART_OFS_APPEND,	/* Offset = 0x2000000 */
-		.size		= MTDPART_SIZ_FULL,	/* 96MB, 0x6000000 */
-	},
-
-};
-
-static struct regulator_consumer_supply dummy_supplies[] = {
-	REGULATOR_SUPPLY("vddvario", "smsc911x.0"),
-	REGULATOR_SUPPLY("vdd33a", "smsc911x.0"),
-};
-
-static void __init omap_ldp_init(void)
-{
-	regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies));
-	omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
-	ldp_init_smsc911x();
-	omap_i2c_init();
-	platform_add_devices(ldp_devices, ARRAY_SIZE(ldp_devices));
-	omap_ads7846_init(1, 54, 310, NULL);
-	omap_serial_init();
-	omap_sdrc_init(NULL, NULL);
-	usb_bind_phy("musb-hdrc.0.auto", 0, "twl4030_usb");
-	usb_musb_init(NULL);
-	board_nand_init(ldp_nand_partitions, ARRAY_SIZE(ldp_nand_partitions),
-			0, 0, nand_default_timings);
-
-	omap_hsmmc_init(mmc);
-	ldp_display_init();
-}
-
-MACHINE_START(OMAP_LDP, "OMAP LDP board")
-	.atag_offset	= 0x100,
-	.reserve	= omap_reserve,
-	.map_io		= omap3_map_io,
-	.init_early	= omap3430_init_early,
-	.init_irq	= omap3_init_irq,
-	.handle_irq	= omap3_intc_handle_irq,
-	.init_machine	= omap_ldp_init,
-	.init_late	= omap3430_init_late,
-	.init_time	= omap3_sync32k_timer_init,
-	.restart	= omap3xxx_restart,
-MACHINE_END
-- 
1.8.1.1