From mboxrd@z Thu Jan 1 00:00:00 1970 From: vijay.kilari@gmail.com (vijay.kilari at gmail.com) Date: Mon, 18 Nov 2013 17:36:56 +0530 Subject: [RFC v2 PATCH 0/1] ARM64: KGDB: Add FPSIMD debug support Message-ID: <1384776417-29076-1-git-send-email-vijay.kilari@gmail.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org From: Vijaya Kumar K Based on ARM64 KGDB support patches, KGDB support for FPSIMD is added. Only debugging of FPSIMD kernel context is supported. This patch requires Ard's patches where in kernel support and below patch for holding thread's fpsimd state. http://permalink.gmane.org/gmane.linux.ports.arm.kernel/277228 So CONFIG_KERNEL_MODE_NEON should be enabled. with this, FPSIMD registers can be viewed or set from gdb tool. Unlike CPU registers, the FPSIMD registers are not saved on exception entry. With the known restriction that FPSIMD should not be touched in interrupt/exception context, in this patch the FPSIMD registers are directly read/written on gdb tool request Here, the FPSIMD registers are read and restored for every FPSIMD register read and write by GDB tool. So this has impact on gdb tool response which is neglible. Other architectures like mips are also implemented similarly v2 changes: - Added API to know thread fpsimd state by checking TIF_FOREIGN_FPSTATE flag. This is based on below patch http://permalink.gmane.org/gmane.linux.ports.arm.kernel/277228 - Allow FPSIMD registers access only when FPSIMD is under use by current thread v1 changes: - Initial patch Tested on ARM64 simulator Vijaya Kumar K (1): ARM64: KGDB: Add FP/SIMD debug support arch/arm64/include/asm/fpsimd.h | 1 + arch/arm64/kernel/fpsimd.c | 5 ++ arch/arm64/kernel/kgdb.c | 105 +++++++++++++++++++++++++-------------- 3 files changed, 73 insertions(+), 38 deletions(-) -- 1.7.9.5