From: shc_work@mail.ru (Alexander Shiyan)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 2/2] ARM: dts: i.MX51 boards: Switch to use standard GPIO flags definitions
Date: Tue, 19 Nov 2013 15:47:27 +0400 [thread overview]
Message-ID: <1384861647-28567-2-git-send-email-shc_work@mail.ru> (raw)
In-Reply-To: <1384861647-28567-1-git-send-email-shc_work@mail.ru>
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
---
arch/arm/boot/dts/imx51-apf51.dts | 2 +-
arch/arm/boot/dts/imx51-apf51dev.dts | 12 +++++++-----
arch/arm/boot/dts/imx51-babbage.dts | 11 ++++++-----
arch/arm/boot/dts/imx51-eukrea-mbimxsd51-baseboard.dts | 4 ++--
arch/arm/boot/dts/imx51.dtsi | 1 +
5 files changed, 17 insertions(+), 13 deletions(-)
diff --git a/arch/arm/boot/dts/imx51-apf51.dts b/arch/arm/boot/dts/imx51-apf51.dts
index 783618d..80840da 100644
--- a/arch/arm/boot/dts/imx51-apf51.dts
+++ b/arch/arm/boot/dts/imx51-apf51.dts
@@ -36,7 +36,7 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_fec>;
phy-mode = "mii";
- phy-reset-gpios = <&gpio3 0 0>;
+ phy-reset-gpios = <&gpio3 0 GPIO_ACTIVE_HIGH>;
phy-reset-duration = <1>;
status = "okay";
};
diff --git a/arch/arm/boot/dts/imx51-apf51dev.dts b/arch/arm/boot/dts/imx51-apf51dev.dts
index 5342a48..f36a3aa 100644
--- a/arch/arm/boot/dts/imx51-apf51dev.dts
+++ b/arch/arm/boot/dts/imx51-apf51dev.dts
@@ -48,7 +48,7 @@
user-key {
label = "user";
- gpios = <&gpio1 3 0>;
+ gpios = <&gpio1 3 GPIO_ACTIVE_HIGH>;
linux,code = <256>; /* BTN_0 */
};
};
@@ -58,7 +58,7 @@
user {
label = "Heartbeat";
- gpios = <&gpio1 2 0>;
+ gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "heartbeat";
};
};
@@ -68,7 +68,8 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ecspi1>;
fsl,spi-num-chipselects = <2>;
- cs-gpios = <&gpio4 24 0>, <&gpio4 25 0>;
+ cs-gpios = <&gpio4 24 GPIO_ACTIVE_HIGH>,
+ <&gpio4 25 GPIO_ACTIVE_HIGH>;
status = "okay";
};
@@ -76,14 +77,15 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ecspi2>;
fsl,spi-num-chipselects = <2>;
- cs-gpios = <&gpio3 28 1>, <&gpio3 27 1>;
+ cs-gpios = <&gpio3 28 GPIO_ACTIVE_LOW>,
+ <&gpio3 27 GPIO_ACTIVE_LOW>;
status = "okay";
};
&esdhc1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_esdhc1>;
- cd-gpios = <&gpio2 29 0>;
+ cd-gpios = <&gpio2 29 GPIO_ACTIVE_HIGH>;
bus-width = <4>;
status = "okay";
};
diff --git a/arch/arm/boot/dts/imx51-babbage.dts b/arch/arm/boot/dts/imx51-babbage.dts
index 5a77d33..bbe899f 100644
--- a/arch/arm/boot/dts/imx51-babbage.dts
+++ b/arch/arm/boot/dts/imx51-babbage.dts
@@ -75,7 +75,7 @@
power {
label = "Power Button";
- gpios = <&gpio2 21 0>;
+ gpios = <&gpio2 21 GPIO_ACTIVE_HIGH>;
linux,code = <116>; /* KEY_POWER */
gpio-key,wakeup;
};
@@ -105,7 +105,7 @@
reg=<0>;
#clock-cells = <0>;
clock-frequency = <26000000>;
- gpios = <&gpio4 26 1>;
+ gpios = <&gpio4 26 GPIO_ACTIVE_LOW>;
};
};
};
@@ -121,8 +121,8 @@
&esdhc2 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_esdhc2>;
- cd-gpios = <&gpio1 6 0>;
- wp-gpios = <&gpio1 5 0>;
+ cd-gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>;
+ wp-gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>;
status = "okay";
};
@@ -137,7 +137,8 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ecspi1>;
fsl,spi-num-chipselects = <2>;
- cs-gpios = <&gpio4 24 0>, <&gpio4 25 0>;
+ cs-gpios = <&gpio4 24 GPIO_ACTIVE_HIGH>,
+ <&gpio4 25 GPIO_ACTIVE_HIGH>;
status = "okay";
pmic: mc13892 at 0 {
diff --git a/arch/arm/boot/dts/imx51-eukrea-mbimxsd51-baseboard.dts b/arch/arm/boot/dts/imx51-eukrea-mbimxsd51-baseboard.dts
index d44a85d..cf2e0d8 100644
--- a/arch/arm/boot/dts/imx51-eukrea-mbimxsd51-baseboard.dts
+++ b/arch/arm/boot/dts/imx51-eukrea-mbimxsd51-baseboard.dts
@@ -30,7 +30,7 @@
button-1 {
label = "BP1";
- gpios = <&gpio3 31 1>;
+ gpios = <&gpio3 31 GPIO_ACTIVE_LOW>;
linux,code = <256>;
gpio-key,wakeup;
linux,input-type = <1>;
@@ -44,7 +44,7 @@
led1 {
label = "led1";
- gpios = <&gpio3 30 1>;
+ gpios = <&gpio3 30 GPIO_ACTIVE_LOW>;
linux,default-trigger = "heartbeat";
};
};
diff --git a/arch/arm/boot/dts/imx51.dtsi b/arch/arm/boot/dts/imx51.dtsi
index 29fda13..db828ab 100644
--- a/arch/arm/boot/dts/imx51.dtsi
+++ b/arch/arm/boot/dts/imx51.dtsi
@@ -15,6 +15,7 @@
#include "imx51-pingrp.h"
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/clock/imx5-clock.h>
+#include <dt-bindings/gpio/gpio.h>
/ {
aliases {
--
1.8.1.5
next prev parent reply other threads:[~2013-11-19 11:47 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-11-19 11:47 [PATCH 1/2] ARM: dts: i.MX51: Move usbphy0 node from AIPS1 Alexander Shiyan
2013-11-19 11:47 ` Alexander Shiyan [this message]
2013-11-20 6:18 ` Shawn Guo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1384861647-28567-2-git-send-email-shc_work@mail.ru \
--to=shc_work@mail.ru \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).