From mboxrd@z Thu Jan 1 00:00:00 1970 From: kishon@ti.com (Kishon Vijay Abraham I) Date: Mon, 25 Nov 2013 15:31:30 +0530 Subject: [PATCH v3 10/10] arm/dts: added dt properties to adapt to the new phy framwork In-Reply-To: <1385373690-12170-1-git-send-email-kishon@ti.com> References: <1385373690-12170-1-git-send-email-kishon@ti.com> Message-ID: <1385373690-12170-11-git-send-email-kishon@ti.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org Added device tree bindings for dwc3, usb2 and usb3 PHYs. The documentation of these can be found at Documentation/devicetree/bindings/phy/phy-bindings.txt and Documentation/devicetree/bindings/phy/ti-phy.txt. Signed-off-by: Kishon Vijay Abraham I --- arch/arm/boot/dts/omap5.dtsi | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi index 29a6354..c135677 100644 --- a/arch/arm/boot/dts/omap5.dtsi +++ b/arch/arm/boot/dts/omap5.dtsi @@ -678,6 +678,8 @@ reg = <0x4a030000 0x10000>; interrupts = ; usb-phy = <&usb2_phy>, <&usb3_phy>; + phys = <&usb2_phy>, <&usb3_phy>; + phy-names = "usb2-phy", "usb3-phy"; dr_mode = "peripheral"; tx-fifo-resize; }; @@ -694,6 +696,7 @@ compatible = "ti,omap-usb2"; reg = <0x4a084000 0x7c>; ctrl-module = <&omap_control_usb2phy>; + #phy-cells = <0>; }; usb3_phy: usb3phy at 4a084400 { @@ -703,6 +706,7 @@ <0x4a084c00 0x40>; reg-names = "phy_rx", "phy_tx", "pll_ctrl"; ctrl-module = <&omap_control_usb3phy>; + #phy-cells = <0>; }; }; -- 1.7.10.4