* [PATCH 1/2] ARM: dts: imx51-babbage: Fix chipselect level for dataflash on spi0.1
@ 2013-11-27 11:55 Alexander Shiyan
2013-11-27 11:55 ` [PATCH 2/2] ARM: dts: imx51-babbage: Define FEC reset pin Alexander Shiyan
2013-11-28 5:40 ` [PATCH 1/2] ARM: dts: imx51-babbage: Fix chipselect level for dataflash on spi0.1 Shawn Guo
0 siblings, 2 replies; 3+ messages in thread
From: Alexander Shiyan @ 2013-11-27 11:55 UTC (permalink / raw)
To: linux-arm-kernel
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
---
arch/arm/boot/dts/imx51-babbage.dts | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/imx51-babbage.dts b/arch/arm/boot/dts/imx51-babbage.dts
index bbe899f..ee0deb3 100644
--- a/arch/arm/boot/dts/imx51-babbage.dts
+++ b/arch/arm/boot/dts/imx51-babbage.dts
@@ -138,7 +138,7 @@
pinctrl-0 = <&pinctrl_ecspi1>;
fsl,spi-num-chipselects = <2>;
cs-gpios = <&gpio4 24 GPIO_ACTIVE_HIGH>,
- <&gpio4 25 GPIO_ACTIVE_HIGH>;
+ <&gpio4 25 GPIO_ACTIVE_LOW>;
status = "okay";
pmic: mc13892 at 0 {
--
1.8.3.2
^ permalink raw reply related [flat|nested] 3+ messages in thread
* [PATCH 2/2] ARM: dts: imx51-babbage: Define FEC reset pin
2013-11-27 11:55 [PATCH 1/2] ARM: dts: imx51-babbage: Fix chipselect level for dataflash on spi0.1 Alexander Shiyan
@ 2013-11-27 11:55 ` Alexander Shiyan
2013-11-28 5:40 ` [PATCH 1/2] ARM: dts: imx51-babbage: Fix chipselect level for dataflash on spi0.1 Shawn Guo
1 sibling, 0 replies; 3+ messages in thread
From: Alexander Shiyan @ 2013-11-27 11:55 UTC (permalink / raw)
To: linux-arm-kernel
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
---
arch/arm/boot/dts/imx51-babbage.dts | 7 ++++++-
1 file changed, 6 insertions(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/imx51-babbage.dts b/arch/arm/boot/dts/imx51-babbage.dts
index ee0deb3..483178a 100644
--- a/arch/arm/boot/dts/imx51-babbage.dts
+++ b/arch/arm/boot/dts/imx51-babbage.dts
@@ -299,7 +299,10 @@
};
pinctrl_fec: fecgrp {
- fsl,pins = <MX51_FEC_PINGRP1>;
+ fsl,pins = <
+ MX51_FEC_PINGRP1
+ MX51_PAD_EIM_A20__GPIO2_14 0x85 /* Reset */
+ >;
};
pinctrl_i2c2: i2c2grp {
@@ -377,6 +380,8 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_fec>;
phy-mode = "mii";
+ phy-reset-gpios = <&gpio2 14 GPIO_ACTIVE_LOW>;
+ phy-reset-duration = <1>;
status = "okay";
};
--
1.8.3.2
^ permalink raw reply related [flat|nested] 3+ messages in thread
* [PATCH 1/2] ARM: dts: imx51-babbage: Fix chipselect level for dataflash on spi0.1
2013-11-27 11:55 [PATCH 1/2] ARM: dts: imx51-babbage: Fix chipselect level for dataflash on spi0.1 Alexander Shiyan
2013-11-27 11:55 ` [PATCH 2/2] ARM: dts: imx51-babbage: Define FEC reset pin Alexander Shiyan
@ 2013-11-28 5:40 ` Shawn Guo
1 sibling, 0 replies; 3+ messages in thread
From: Shawn Guo @ 2013-11-28 5:40 UTC (permalink / raw)
To: linux-arm-kernel
On Wed, Nov 27, 2013 at 03:55:45PM +0400, Alexander Shiyan wrote:
> Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Applied both, thanks.
Shawn
> ---
> arch/arm/boot/dts/imx51-babbage.dts | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/arch/arm/boot/dts/imx51-babbage.dts b/arch/arm/boot/dts/imx51-babbage.dts
> index bbe899f..ee0deb3 100644
> --- a/arch/arm/boot/dts/imx51-babbage.dts
> +++ b/arch/arm/boot/dts/imx51-babbage.dts
> @@ -138,7 +138,7 @@
> pinctrl-0 = <&pinctrl_ecspi1>;
> fsl,spi-num-chipselects = <2>;
> cs-gpios = <&gpio4 24 GPIO_ACTIVE_HIGH>,
> - <&gpio4 25 GPIO_ACTIVE_HIGH>;
> + <&gpio4 25 GPIO_ACTIVE_LOW>;
> status = "okay";
>
> pmic: mc13892 at 0 {
> --
> 1.8.3.2
>
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2013-11-28 5:40 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2013-11-27 11:55 [PATCH 1/2] ARM: dts: imx51-babbage: Fix chipselect level for dataflash on spi0.1 Alexander Shiyan
2013-11-27 11:55 ` [PATCH 2/2] ARM: dts: imx51-babbage: Define FEC reset pin Alexander Shiyan
2013-11-28 5:40 ` [PATCH 1/2] ARM: dts: imx51-babbage: Fix chipselect level for dataflash on spi0.1 Shawn Guo
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).