[PATCH v3 00/36] mtd: st_spi_fsm: Add new driver

[lee.jones@linaro.org (Lee Jones)]

Version 3:
  Okay, this thing should be fully functional now. Identify a chip
  based on it's JEDEC ID, Read, Write, Erase (all or by sector).
  Support for various chip quirks added too.

Version 2:
  The first bunch of these patches have been on the MLs before, but
  didn't receive a great deal of attention for the most part. We are
  a little more featureful this time however. We can now successfully
  setup and configure the N25Q256. We still can't read/write/erase
  it though. I'll start work on that next week and will provide it in
  the next instalment.

Version 1:
  First stab at getting this thing Mainlined. It doesn't do a great deal
  yet, but we are able to initialise the device and dynamically set it up
  correctly based on an extracted JEDEC ID.
 
 Documentation/devicetree/bindings/mtd/st-fsm.txt |   26 ++
 arch/arm/boot/dts/stih416-b2105.dts              |   14 +
 arch/arm/boot/dts/stih416-pinctrl.dtsi           |   12 +
 drivers/mtd/devices/Kconfig                      |    7 +
 drivers/mtd/devices/Makefile                     |    1 +
 drivers/mtd/devices/serial_flash_cmds.h          |   91 +++++++
 drivers/mtd/devices/st_spi_fsm.c                 | 1715 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
 drivers/mtd/devices/st_spi_fsm.h                 |  456 +++++++++++++++++++++++++++++++
 8 files changed, 2322 insertions(+)