linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: lee.jones@linaro.org (Lee Jones)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v3 10/36] mtd: st_spi_fsm: Dynamically setup flash device based on JEDEC ID
Date: Fri, 29 Nov 2013 12:18:59 +0000	[thread overview]
Message-ID: <1385727565-25794-11-git-send-email-lee.jones@linaro.org> (raw)
In-Reply-To: <1385727565-25794-1-git-send-email-lee.jones@linaro.org>

Using previously added infrastructure we can now extract a device's JEDEC
ID, compare it to a list of known and supported devices and make assumptions
based on known characteristics of a given chip.

Signed-off-by: Lee Jones <lee.jones@linaro.org>
---
 drivers/mtd/devices/st_spi_fsm.c | 26 +++++++++++++++++++++++++-
 drivers/mtd/devices/st_spi_fsm.h |  1 +
 2 files changed, 26 insertions(+), 1 deletion(-)

diff --git a/drivers/mtd/devices/st_spi_fsm.c b/drivers/mtd/devices/st_spi_fsm.c
index 71b6188..ef177e5 100644
--- a/drivers/mtd/devices/st_spi_fsm.c
+++ b/drivers/mtd/devices/st_spi_fsm.c
@@ -140,6 +140,7 @@ static void stfsm_read_jedec(struct stfsm *fsm, uint8_t *const jedec)
 
 static struct flash_info * stfsm_jedec_probe(struct stfsm *fsm)
 {
+	struct flash_info	*info;
 	u16                     ext_jedec;
 	u32			jedec;
 	u8			id[5];
@@ -157,6 +158,15 @@ static struct flash_info * stfsm_jedec_probe(struct stfsm *fsm)
 	dev_dbg(fsm->dev, "JEDEC =  0x%08x [%02x %02x %02x %02x %02x]\n",
 		jedec, id[0], id[1], id[2], id[3], id[4]);
 
+	for (info = flash_types; info->name; info++) {
+		if (info->jedec_id == jedec) {
+			if (info->ext_id && info->ext_id != ext_jedec)
+				continue;
+			return info;
+		}
+	}
+	dev_err(fsm->dev, "Unrecognized JEDEC id %06x\n", jedec);
+
 	return NULL;
 }
 
@@ -251,6 +261,7 @@ static int stfsm_init(struct stfsm *fsm)
 static int stfsm_probe(struct platform_device *pdev)
 {
 	struct device_node *np = pdev->dev.of_node;
+	struct flash_info *info;
 	struct resource *res;
 	struct stfsm *fsm;
 	int ret;
@@ -297,7 +308,11 @@ static int stfsm_probe(struct platform_device *pdev)
 	}
 
 	/* Detect SPI FLASH device */
-	stfsm_jedec_probe(fsm);
+	info = stfsm_jedec_probe(fsm);
+	if (!info)
+		return -ENODEV;
+
+	fsm->info = info;
 
 	platform_set_drvdata(pdev, fsm);
 
@@ -306,6 +321,15 @@ static int stfsm_probe(struct platform_device *pdev)
 	fsm->mtd.writesize	= 4;
 	fsm->mtd.writebufsize	= fsm->mtd.writesize;
 	fsm->mtd.flags		= MTD_CAP_NORFLASH;
+	fsm->mtd.size		= info->sector_size * info->n_sectors;
+	fsm->mtd.erasesize	= info->sector_size;
+
+	dev_err(&pdev->dev,
+		"Found serial flash device: %s\n"
+		" size = %llx (%lldMiB) erasesize = 0x%08x (%uKiB)\n",
+		info->name,
+		(long long)fsm->mtd.size, (long long)(fsm->mtd.size >> 20),
+		fsm->mtd.erasesize, (fsm->mtd.erasesize >> 10));
 
 	return mtd_device_parse_register(&fsm->mtd, NULL, NULL, NULL, 0);
 }
diff --git a/drivers/mtd/devices/st_spi_fsm.h b/drivers/mtd/devices/st_spi_fsm.h
index fd1472e..0a6272c 100644
--- a/drivers/mtd/devices/st_spi_fsm.h
+++ b/drivers/mtd/devices/st_spi_fsm.h
@@ -235,6 +235,7 @@ struct stfsm {
 	struct resource		*region;
 	struct mtd_info		mtd;
 	struct mutex		lock;
+	struct flash_info 	*info;
 
 	uint32_t		fifo_dir_delay;
 };
-- 
1.8.3.2

  parent reply	other threads:[~2013-11-29 12:18 UTC|newest]

Thread overview: 77+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2013-11-29 12:18 [PATCH v3 00/36] mtd: st_spi_fsm: Add new driver Lee Jones
2013-11-29 12:18 ` [PATCH v3 01/36] mtd: st_spi_fsm: Allocate resources and register with MTD framework Lee Jones
2013-12-02 13:52   ` srinivas kandagatla
2013-12-10 18:47   ` Brian Norris
2013-12-10 20:46   ` Brian Norris
2013-12-11  8:48     ` Lee Jones
2013-12-11  9:37       ` Angus Clark
2013-12-11 18:01         ` Brian Norris
2013-11-29 12:18 ` [PATCH v3 02/36] mtd: st_spi_fsm: Supply all register address and bit logic defines Lee Jones
2013-11-29 12:18 ` [PATCH v3 03/36] mtd: st_spi_fsm: Initialise and configure the FSM for normal working conditions Lee Jones
2013-12-10 19:01   ` Brian Norris
2013-12-10 20:08     ` Brian Norris
2013-11-29 12:18 ` [PATCH v3 04/36] mtd: st_spi_fsm: Supply framework for device requests Lee Jones
2013-12-10 20:19   ` Brian Norris
2013-12-13 14:35     ` Angus Clark
2013-11-29 12:18 ` [PATCH v3 05/36] mtd: st_spi_fsm: Supply a method to read from the FSM's FIFO Lee Jones
2013-11-29 12:18 ` [PATCH v3 06/36] mtd: st_spi_fsm: Supply defines for the possible flash command opcodes Lee Jones
2013-11-29 12:18 ` [PATCH v3 07/36] mtd: st_spi_fsm: Add support for JEDEC ID extraction Lee Jones
2013-11-29 12:18 ` [PATCH v3 08/36] mtd: devices: Provide header for shared OPCODEs and SFDP commands Lee Jones
2013-12-10 21:48   ` Brian Norris
2013-12-10 22:23     ` Brian Norris
2013-12-13 15:46       ` Angus Clark
2013-12-13 15:06     ` Angus Clark
2013-11-29 12:18 ` [PATCH v3 09/36] mtd: st_spi_fsm: Provide device look-up table Lee Jones
2013-12-10 22:03   ` Brian Norris
2013-12-17  9:17     ` Angus Clark
2014-01-07 16:11       ` Lee Jones
2013-11-29 12:18 ` Lee Jones [this message]
2013-11-29 12:19 ` [PATCH v3 11/36] mtd: st_spi_fsm: Search for preferred FSM message sequence configurations Lee Jones
2013-12-11  1:06   ` Brian Norris
2013-12-17  9:57     ` Angus Clark
2013-12-17 10:46       ` Lee Jones
2013-12-17 10:56         ` Angus Clark
2013-11-29 12:19 ` [PATCH v3 12/36] mtd: st_spi_fsm: Fetch platform specific configurations Lee Jones
2013-11-29 12:19 ` [PATCH v3 13/36] mtd: st_spi_fsm: Prepare the read/write FSM message sequence(s) Lee Jones
2013-11-29 12:19 ` [PATCH v3 14/36] mtd: st_spi_fsm: Add device-tree binding documentation Lee Jones
2013-11-29 19:07   ` Linus Walleij
2013-12-02 11:03     ` Lee Jones
2013-12-03 10:23       ` Linus Walleij
2013-12-03 11:31         ` Lee Jones
2013-12-03 12:22           ` Linus Walleij
2013-12-03 12:31             ` Lee Jones
2013-11-29 12:19 ` [PATCH v3 15/36] mtd: st_spi_fsm: Fetch boot-device from mode pins Lee Jones
2013-12-11  1:27   ` Brian Norris
2013-11-29 12:19 ` [PATCH v3 16/36] mtd: st_spi_fsm: Provide the erase one sector sequence Lee Jones
2013-11-29 12:19 ` [PATCH v3 17/36] mtd: st_spi_fsm: Provide the sequence for enabling 32bit addressing mode Lee Jones
2013-11-29 12:19 ` [PATCH v3 18/36] mtd: st_spi_fsm: Prepare read/write sequences according to configuration Lee Jones
2013-11-29 12:19 ` [PATCH v3 19/36] mtd: st_spi_fsm: Add a check to if the chip can handle an SoC reset Lee Jones
2013-11-29 12:19 ` [PATCH v3 20/36] mtd: st_spi_fsm: Provide a method to put the chip into 32bit addressing mode Lee Jones
2013-12-11  1:49   ` Brian Norris
2013-11-29 12:19 ` [PATCH v3 21/36] mtd: st_spi_fsm: Update the flash Volatile Configuration Register Lee Jones
2013-11-29 12:19 ` [PATCH v3 22/36] mtd: st_spi_fsm: Provide the default read/write configurations Lee Jones
2013-12-11  1:37   ` Brian Norris
2013-11-29 12:19 ` [PATCH v3 23/36] mtd: st_spi_fsm: Supply the N25Qxxx specific read configurations Lee Jones
2013-11-29 12:19 ` [PATCH v3 24/36] mtd: st_spi_fsm: Supply the N25Qxxx chip specific configuration call-back Lee Jones
2013-12-11  2:33   ` Brian Norris
2013-11-29 12:19 ` [PATCH v3 25/36] mtd: st_spi_fsm: Prepare default sequences for read/write/erase Lee Jones
2013-11-29 12:19 ` [PATCH v3 26/36] mtd: st_spi_fsm: Add the ability to read from a Serial Flash device Lee Jones
2013-12-11  2:09   ` Brian Norris
2013-11-29 12:19 ` [PATCH v3 27/36] mtd: st_spi_fsm: Write to Flash via the FSM FIFO Lee Jones
2013-11-29 12:19 ` [PATCH v3 28/36] mtd: st_spi_fsm: Supply a busy wait for post-write status Lee Jones
2013-12-11  2:13   ` Brian Norris
2013-11-29 12:19 ` [PATCH v3 29/36] mtd: st_spi_fsm: Add the ability to write to a Serial Flash device Lee Jones
2013-11-29 12:19 ` [PATCH v3 30/36] mtd: st_spi_fsm: Erase partly or as a whole " Lee Jones
2013-12-11  2:19   ` Brian Norris
2013-11-29 12:19 ` [PATCH v3 31/36] mtd: st_spi_fsm: Add the ability to read the FSM's status Lee Jones
2013-11-29 12:19 ` [PATCH v3 32/36] mtd: st_spi_fsm: Add the ability to write to FSM's status register Lee Jones
2013-11-29 12:19 ` [PATCH v3 33/36] mtd: st_spi_fsm: Supply the MX25xxx chip specific configuration call-back Lee Jones
2013-12-11  2:25   ` Brian Norris
2013-11-29 12:19 ` [PATCH v3 34/36] mtd: st_spi_fsm: Supply the S25FLxxx " Lee Jones
2013-11-29 12:19 ` [PATCH v3 35/36] mtd: st_spi_fsm: Supply the W25Qxxx " Lee Jones
2013-11-29 12:19 ` [PATCH v3 36/36] ARM: STi: Add support for the FSM Serial Flash Controller Lee Jones
2013-12-02 13:05   ` srinivas kandagatla
2013-12-02 13:20     ` Lee Jones
2013-12-02 13:26       ` srinivas kandagatla
2013-12-02 13:43         ` Lee Jones
2013-12-02 13:56           ` srinivas kandagatla

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1385727565-25794-11-git-send-email-lee.jones@linaro.org \
    --to=lee.jones@linaro.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).