linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: lee.jones@linaro.org (Lee Jones)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v3 15/36] mtd: st_spi_fsm: Fetch boot-device from mode pins
Date: Fri, 29 Nov 2013 12:19:04 +0000	[thread overview]
Message-ID: <1385727565-25794-16-git-send-email-lee.jones@linaro.org> (raw)
In-Reply-To: <1385727565-25794-1-git-send-email-lee.jones@linaro.org>

It's important for us to determine which device was used to boot from in
order to make some correct decisions surrounding Power Management. On
each of the platforms which support the FSM this is communicated via
a set of mode pins held in the system configuration area. This patch
determine the boot device and stores the result.

Signed-off-by: Lee Jones <lee.jones@linaro.org>
---
 drivers/mtd/devices/st_spi_fsm.c | 41 ++++++++++++++++++++++++++++++++++++++++
 drivers/mtd/devices/st_spi_fsm.h |  1 +
 2 files changed, 42 insertions(+)

diff --git a/drivers/mtd/devices/st_spi_fsm.c b/drivers/mtd/devices/st_spi_fsm.c
index e04de62..bb642a1 100644
--- a/drivers/mtd/devices/st_spi_fsm.c
+++ b/drivers/mtd/devices/st_spi_fsm.c
@@ -14,7 +14,9 @@
  */
 #include <linux/kernel.h>
 #include <linux/module.h>
+#include <linux/regmap.h>
 #include <linux/platform_device.h>
+#include <linux/mfd/syscon.h>
 #include <linux/mtd/mtd.h>
 #include <linux/sched.h>
 #include <linux/delay.h>
@@ -346,9 +348,48 @@ static void stfsm_fetch_platform_configs(struct platform_device *pdev)
 {
 	struct stfsm *fsm = platform_get_drvdata(pdev);
 	struct flash_info *info = fsm->info;
+	struct device_node *np = pdev->dev.of_node;
+	struct regmap *regmap;
+	uint32_t boot_device_reg;
+	uint32_t boot_device_spi;
+	uint32_t boot_device;     /* Value we read from *boot_device_reg */
+	int ret;
 
+	/* Booting from SPI NOR Flash is the default */
+	fsm->booted_from_spi = true;
+
+	/* Use device size to determine address width */
 	if (info->sector_size * info->n_sectors > 0xFFFFFF)
 		info->flags |= FLASH_FLAG_32BIT_ADDR;
+
+	regmap = syscon_regmap_lookup_by_phandle(np, "st,syscfg");
+	if (!IS_ERR(regmap)) {
+		ret = PTR_ERR(regmap);
+		goto boot_device_fail;
+	}
+
+	/* Where in the syscon the boot device information lives */
+	ret = of_property_read_u32(np, "boot-device-reg", &boot_device_reg);
+	if (ret)
+		goto boot_device_fail;
+
+	/* Boot device value when booted from SPI NOR */
+	ret = of_property_read_u32(np, "boot-device-spi", &boot_device_spi);
+	if (ret)
+		goto boot_device_fail;
+
+	ret = regmap_read(regmap, boot_device_reg, &boot_device);
+	if (ret)
+		goto boot_device_fail;
+
+	if (boot_device != boot_device_spi)
+		fsm->booted_from_spi = false;
+
+	return;
+
+boot_device_fail:
+	dev_warn(&pdev->dev,
+		 "failed to fetch boot device, assuming boot from SPI\n");
 }
 
 static int stfsm_probe(struct platform_device *pdev)
diff --git a/drivers/mtd/devices/st_spi_fsm.h b/drivers/mtd/devices/st_spi_fsm.h
index 6fafa07..a0eafa9 100644
--- a/drivers/mtd/devices/st_spi_fsm.h
+++ b/drivers/mtd/devices/st_spi_fsm.h
@@ -238,6 +238,7 @@ struct stfsm {
 	struct flash_info 	*info;
 
 	uint32_t		fifo_dir_delay;
+	bool			booted_from_spi;
 };
 
 struct stfsm_seq {
-- 
1.8.3.2

  parent reply	other threads:[~2013-11-29 12:19 UTC|newest]

Thread overview: 77+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2013-11-29 12:18 [PATCH v3 00/36] mtd: st_spi_fsm: Add new driver Lee Jones
2013-11-29 12:18 ` [PATCH v3 01/36] mtd: st_spi_fsm: Allocate resources and register with MTD framework Lee Jones
2013-12-02 13:52   ` srinivas kandagatla
2013-12-10 18:47   ` Brian Norris
2013-12-10 20:46   ` Brian Norris
2013-12-11  8:48     ` Lee Jones
2013-12-11  9:37       ` Angus Clark
2013-12-11 18:01         ` Brian Norris
2013-11-29 12:18 ` [PATCH v3 02/36] mtd: st_spi_fsm: Supply all register address and bit logic defines Lee Jones
2013-11-29 12:18 ` [PATCH v3 03/36] mtd: st_spi_fsm: Initialise and configure the FSM for normal working conditions Lee Jones
2013-12-10 19:01   ` Brian Norris
2013-12-10 20:08     ` Brian Norris
2013-11-29 12:18 ` [PATCH v3 04/36] mtd: st_spi_fsm: Supply framework for device requests Lee Jones
2013-12-10 20:19   ` Brian Norris
2013-12-13 14:35     ` Angus Clark
2013-11-29 12:18 ` [PATCH v3 05/36] mtd: st_spi_fsm: Supply a method to read from the FSM's FIFO Lee Jones
2013-11-29 12:18 ` [PATCH v3 06/36] mtd: st_spi_fsm: Supply defines for the possible flash command opcodes Lee Jones
2013-11-29 12:18 ` [PATCH v3 07/36] mtd: st_spi_fsm: Add support for JEDEC ID extraction Lee Jones
2013-11-29 12:18 ` [PATCH v3 08/36] mtd: devices: Provide header for shared OPCODEs and SFDP commands Lee Jones
2013-12-10 21:48   ` Brian Norris
2013-12-10 22:23     ` Brian Norris
2013-12-13 15:46       ` Angus Clark
2013-12-13 15:06     ` Angus Clark
2013-11-29 12:18 ` [PATCH v3 09/36] mtd: st_spi_fsm: Provide device look-up table Lee Jones
2013-12-10 22:03   ` Brian Norris
2013-12-17  9:17     ` Angus Clark
2014-01-07 16:11       ` Lee Jones
2013-11-29 12:18 ` [PATCH v3 10/36] mtd: st_spi_fsm: Dynamically setup flash device based on JEDEC ID Lee Jones
2013-11-29 12:19 ` [PATCH v3 11/36] mtd: st_spi_fsm: Search for preferred FSM message sequence configurations Lee Jones
2013-12-11  1:06   ` Brian Norris
2013-12-17  9:57     ` Angus Clark
2013-12-17 10:46       ` Lee Jones
2013-12-17 10:56         ` Angus Clark
2013-11-29 12:19 ` [PATCH v3 12/36] mtd: st_spi_fsm: Fetch platform specific configurations Lee Jones
2013-11-29 12:19 ` [PATCH v3 13/36] mtd: st_spi_fsm: Prepare the read/write FSM message sequence(s) Lee Jones
2013-11-29 12:19 ` [PATCH v3 14/36] mtd: st_spi_fsm: Add device-tree binding documentation Lee Jones
2013-11-29 19:07   ` Linus Walleij
2013-12-02 11:03     ` Lee Jones
2013-12-03 10:23       ` Linus Walleij
2013-12-03 11:31         ` Lee Jones
2013-12-03 12:22           ` Linus Walleij
2013-12-03 12:31             ` Lee Jones
2013-11-29 12:19 ` Lee Jones [this message]
2013-12-11  1:27   ` [PATCH v3 15/36] mtd: st_spi_fsm: Fetch boot-device from mode pins Brian Norris
2013-11-29 12:19 ` [PATCH v3 16/36] mtd: st_spi_fsm: Provide the erase one sector sequence Lee Jones
2013-11-29 12:19 ` [PATCH v3 17/36] mtd: st_spi_fsm: Provide the sequence for enabling 32bit addressing mode Lee Jones
2013-11-29 12:19 ` [PATCH v3 18/36] mtd: st_spi_fsm: Prepare read/write sequences according to configuration Lee Jones
2013-11-29 12:19 ` [PATCH v3 19/36] mtd: st_spi_fsm: Add a check to if the chip can handle an SoC reset Lee Jones
2013-11-29 12:19 ` [PATCH v3 20/36] mtd: st_spi_fsm: Provide a method to put the chip into 32bit addressing mode Lee Jones
2013-12-11  1:49   ` Brian Norris
2013-11-29 12:19 ` [PATCH v3 21/36] mtd: st_spi_fsm: Update the flash Volatile Configuration Register Lee Jones
2013-11-29 12:19 ` [PATCH v3 22/36] mtd: st_spi_fsm: Provide the default read/write configurations Lee Jones
2013-12-11  1:37   ` Brian Norris
2013-11-29 12:19 ` [PATCH v3 23/36] mtd: st_spi_fsm: Supply the N25Qxxx specific read configurations Lee Jones
2013-11-29 12:19 ` [PATCH v3 24/36] mtd: st_spi_fsm: Supply the N25Qxxx chip specific configuration call-back Lee Jones
2013-12-11  2:33   ` Brian Norris
2013-11-29 12:19 ` [PATCH v3 25/36] mtd: st_spi_fsm: Prepare default sequences for read/write/erase Lee Jones
2013-11-29 12:19 ` [PATCH v3 26/36] mtd: st_spi_fsm: Add the ability to read from a Serial Flash device Lee Jones
2013-12-11  2:09   ` Brian Norris
2013-11-29 12:19 ` [PATCH v3 27/36] mtd: st_spi_fsm: Write to Flash via the FSM FIFO Lee Jones
2013-11-29 12:19 ` [PATCH v3 28/36] mtd: st_spi_fsm: Supply a busy wait for post-write status Lee Jones
2013-12-11  2:13   ` Brian Norris
2013-11-29 12:19 ` [PATCH v3 29/36] mtd: st_spi_fsm: Add the ability to write to a Serial Flash device Lee Jones
2013-11-29 12:19 ` [PATCH v3 30/36] mtd: st_spi_fsm: Erase partly or as a whole " Lee Jones
2013-12-11  2:19   ` Brian Norris
2013-11-29 12:19 ` [PATCH v3 31/36] mtd: st_spi_fsm: Add the ability to read the FSM's status Lee Jones
2013-11-29 12:19 ` [PATCH v3 32/36] mtd: st_spi_fsm: Add the ability to write to FSM's status register Lee Jones
2013-11-29 12:19 ` [PATCH v3 33/36] mtd: st_spi_fsm: Supply the MX25xxx chip specific configuration call-back Lee Jones
2013-12-11  2:25   ` Brian Norris
2013-11-29 12:19 ` [PATCH v3 34/36] mtd: st_spi_fsm: Supply the S25FLxxx " Lee Jones
2013-11-29 12:19 ` [PATCH v3 35/36] mtd: st_spi_fsm: Supply the W25Qxxx " Lee Jones
2013-11-29 12:19 ` [PATCH v3 36/36] ARM: STi: Add support for the FSM Serial Flash Controller Lee Jones
2013-12-02 13:05   ` srinivas kandagatla
2013-12-02 13:20     ` Lee Jones
2013-12-02 13:26       ` srinivas kandagatla
2013-12-02 13:43         ` Lee Jones
2013-12-02 13:56           ` srinivas kandagatla

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1385727565-25794-16-git-send-email-lee.jones@linaro.org \
    --to=lee.jones@linaro.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).