From mboxrd@z Thu Jan 1 00:00:00 1970 From: lee.jones@linaro.org (Lee Jones) Date: Fri, 29 Nov 2013 12:18:53 +0000 Subject: [PATCH v3 04/36] mtd: st_spi_fsm: Supply framework for device requests In-Reply-To: <1385727565-25794-1-git-send-email-lee.jones@linaro.org> References: <1385727565-25794-1-git-send-email-lee.jones@linaro.org> Message-ID: <1385727565-25794-5-git-send-email-lee.jones@linaro.org> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org The FSM hardware works by setting a predetermined sequence of register writes. Rather than open coding them inside each functional block we're going to define them in a series of formatted 'sequence structures'. This patch provides the framework which shall be used for every action. Signed-off-by: Lee Jones --- drivers/mtd/devices/st_spi_fsm.c | 35 +++++++++++++++++++++++++++++++++++ drivers/mtd/devices/st_spi_fsm.h | 14 ++++++++++++++ 2 files changed, 49 insertions(+) diff --git a/drivers/mtd/devices/st_spi_fsm.c b/drivers/mtd/devices/st_spi_fsm.c index fe96b47..8ac8cd9 100644 --- a/drivers/mtd/devices/st_spi_fsm.c +++ b/drivers/mtd/devices/st_spi_fsm.c @@ -25,6 +25,11 @@ #include "st_spi_fsm.h" +static inline int stfsm_is_idle(struct stfsm *fsm) +{ + return readl(fsm->base + SPI_FAST_SEQ_STA) & 0x10; +} + static inline uint32_t stfsm_fifo_available(struct stfsm *fsm) { return (readl(fsm->base + SPI_FAST_SEQ_STA) >> 5) & 0x7f; @@ -46,6 +51,36 @@ static void stfsm_clear_fifo(struct stfsm *fsm) } } +static inline void stfsm_load_seq(struct stfsm *fsm, + const struct stfsm_seq *seq) +{ + void __iomem *dst = fsm->base + SPI_FAST_SEQ_TRANSFER_SIZE; + const uint32_t *src = (const uint32_t *)seq; + int words = STFSM_SEQ_SIZE / sizeof(uint32_t); + + BUG_ON(!stfsm_is_idle(fsm)); + + while (words--) { + writel(*src, dst); + src++; + dst += 4; + } +} + +static void stfsm_wait_seq(struct stfsm *fsm) +{ + unsigned long timeo = jiffies + HZ; + + while (time_before(jiffies, timeo)) { + if (stfsm_is_idle(fsm)) + return; + + cond_resched(); + } + + dev_err(fsm->dev, "timeout on sequence completion\n"); +} + static int stfsm_set_mode(struct stfsm *fsm, uint32_t mode) { int ret, timeout = 10; diff --git a/drivers/mtd/devices/st_spi_fsm.h b/drivers/mtd/devices/st_spi_fsm.h index 4e92e58..6164142 100644 --- a/drivers/mtd/devices/st_spi_fsm.h +++ b/drivers/mtd/devices/st_spi_fsm.h @@ -199,4 +199,18 @@ struct stfsm { uint32_t fifo_dir_delay; }; +struct stfsm_seq { + uint32_t data_size; + uint32_t addr1; + uint32_t addr2; + uint32_t addr_cfg; + uint32_t seq_opc[5]; + uint32_t mode; + uint32_t dummy; + uint32_t status; + uint8_t seq[16]; + uint32_t seq_cfg; +} __attribute__((__packed__, aligned(4))); +#define STFSM_SEQ_SIZE sizeof(struct stfsm_seq) + #endif /* ST_SPI_FSM_H */ -- 1.8.3.2