From mboxrd@z Thu Jan 1 00:00:00 1970 From: lee.jones@linaro.org (Lee Jones) Date: Mon, 2 Dec 2013 18:00:21 +0000 Subject: [PATCH 2/3] ASoC: ux500_pcm: Differentiate between pdata and DT initialisation In-Reply-To: <1386007222-10081-1-git-send-email-lee.jones@linaro.org> References: <1386007222-10081-1-git-send-email-lee.jones@linaro.org> Message-ID: <1386007222-10081-2-git-send-email-lee.jones@linaro.org> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org If booting with full DT support (i.e. DMA too, the last piece of the puzzle), then we don't need to use the compatible request channel call back. We also require slightly different flags to inform the core that we are booting with DT. Cc: alsa-devel at alsa-project.org Acked-by: Linus Walleij Signed-off-by: Lee Jones --- sound/soc/ux500/ux500_pcm.c | 26 +++++++++++++++++++++----- 1 file changed, 21 insertions(+), 5 deletions(-) diff --git a/sound/soc/ux500/ux500_pcm.c b/sound/soc/ux500/ux500_pcm.c index 2f1bdb7..00cdd7b 100644 --- a/sound/soc/ux500/ux500_pcm.c +++ b/sound/soc/ux500/ux500_pcm.c @@ -134,15 +134,31 @@ static const struct snd_dmaengine_pcm_config ux500_dmaengine_pcm_config = { .prepare_slave_config = ux500_pcm_prepare_slave_config, }; +static const struct snd_dmaengine_pcm_config ux500_dmaengine_of_pcm_config = { + .prepare_slave_config = ux500_pcm_prepare_slave_config, +}; + int ux500_pcm_register_platform(struct platform_device *pdev) { + const struct snd_dmaengine_pcm_config *pcm_config; + struct device_node *np = pdev->dev.of_node; + unsigned int pcm_flags; int ret; - ret = snd_dmaengine_pcm_register(&pdev->dev, - &ux500_dmaengine_pcm_config, - SND_DMAENGINE_PCM_FLAG_NO_RESIDUE | - SND_DMAENGINE_PCM_FLAG_COMPAT | - SND_DMAENGINE_PCM_FLAG_NO_DT); + if (np) { + pcm_config = &ux500_dmaengine_of_pcm_config; + + pcm_flags = SND_DMAENGINE_PCM_FLAG_NO_RESIDUE | + SND_DMAENGINE_PCM_FLAG_COMPAT; + } else { + pcm_config = &ux500_dmaengine_pcm_config; + + pcm_flags = SND_DMAENGINE_PCM_FLAG_NO_RESIDUE | + SND_DMAENGINE_PCM_FLAG_NO_DT | + SND_DMAENGINE_PCM_FLAG_COMPAT; + } + + ret = snd_dmaengine_pcm_register(&pdev->dev, pcm_config, pcm_flags); if (ret < 0) { dev_err(&pdev->dev, "%s: ERROR: Failed to register platform '%s' (%d)!\n", -- 1.8.3.2