From: rogerq@ti.com (Roger Quadros)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 1/1] gpio: twl4030: Fix regression for twl gpio LED output
Date: Wed, 4 Dec 2013 13:34:31 +0200 [thread overview]
Message-ID: <1386156871-7639-2-git-send-email-rogerq@ti.com> (raw)
In-Reply-To: <1386156871-7639-1-git-send-email-rogerq@ti.com>
Commit 0b2aa8be introduced a regression that causes failure
in setting LED GPO direction to OUT.
This causes USB host probe failures for Beagleboard C4.
[ 2.075469] platform usb_phy_gen_xceiv.2: Driver usb_phy_gen_xceiv requests probe deferral
[ 2.090454] hsusb2_vcc: Failed to request enable GPIO510: -22
[ 2.100982] reg-fixed-voltage reg-fixed-voltage.0.auto: Failed to register regulator: -22
[ 2.109954] reg-fixed-voltage: probe of reg-fixed-voltage.0.auto failed with error -22
direction_out/direction_in must return 0 if the operation succeeded.
Signed-off-by: Roger Quadros <rogerq@ti.com>
---
drivers/gpio/gpio-twl4030.c | 15 +++++++++------
1 file changed, 9 insertions(+), 6 deletions(-)
diff --git a/drivers/gpio/gpio-twl4030.c b/drivers/gpio/gpio-twl4030.c
index b97d6a6..0999ed1 100644
--- a/drivers/gpio/gpio-twl4030.c
+++ b/drivers/gpio/gpio-twl4030.c
@@ -294,13 +294,13 @@ out:
static int twl_direction_in(struct gpio_chip *chip, unsigned offset)
{
struct gpio_twl4030_priv *priv = to_gpio_twl4030(chip);
- int ret;
+ int ret = 0;
mutex_lock(&priv->mutex);
if (offset < TWL4030_GPIO_MAX)
- ret = twl4030_set_gpio_direction(offset, 1);
+ twl4030_set_gpio_direction(offset, 1);
else
- ret = -EINVAL;
+ ret = -EINVAL; /* LED outputs can't be set as input */
if (!ret)
priv->direction &= ~BIT(offset);
@@ -354,18 +354,21 @@ static void twl_set(struct gpio_chip *chip, unsigned offset, int value)
static int twl_direction_out(struct gpio_chip *chip, unsigned offset, int value)
{
struct gpio_twl4030_priv *priv = to_gpio_twl4030(chip);
- int ret = -EINVAL;
mutex_lock(&priv->mutex);
if (offset < TWL4030_GPIO_MAX)
- ret = twl4030_set_gpio_direction(offset, 0);
+ twl4030_set_gpio_direction(offset, 0);
+
+ /*
+ * LED gpio's i.e. offset >= TWL4030_GPIO_MAX are always output
+ */
priv->direction |= BIT(offset);
mutex_unlock(&priv->mutex);
twl_set(chip, offset, value);
- return ret;
+ return 0;
}
static int twl_to_irq(struct gpio_chip *chip, unsigned offset)
--
1.8.3.2
next prev parent reply other threads:[~2013-12-04 11:34 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-12-04 11:34 [PATCH 0/1] gpio: twl4030: gpio LED regression fix for 3.13 rc Roger Quadros
2013-12-04 11:34 ` Roger Quadros [this message]
2013-12-04 17:37 ` [PATCH 1/1] gpio: twl4030: Fix regression for twl gpio LED output Tony Lindgren
2013-12-05 9:15 ` Roger Quadros
2013-12-05 9:23 ` [PATCH v2 " Roger Quadros
2013-12-05 16:55 ` Tony Lindgren
2013-12-10 12:16 ` Linus Walleij
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1386156871-7639-2-git-send-email-rogerq@ti.com \
--to=rogerq@ti.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).