From mboxrd@z Thu Jan 1 00:00:00 1970 From: maxime.ripard@free-electrons.com (Maxime Ripard) Date: Sat, 7 Dec 2013 12:31:42 +0100 Subject: [PATCH] net: allwinner: emac: Add missing free_irq Message-ID: <1386415902-32697-1-git-send-email-maxime.ripard@free-electrons.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org The sun4i-emac driver uses devm_request_irq at .ndo_open time, but relies on the managed device mechanism to actually free it. This causes an issue whenever someone wants to restart the interface, the interrupt still being held, and not yet released. Fall back to using the regular request_irq at .ndo_open time, and introduce a free_irq during .ndo_stop. Signed-off-by: Maxime Ripard --- Hi David, It would be great if this patch would be applied to 3.13. Thanks, Maxime drivers/net/ethernet/allwinner/sun4i-emac.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/drivers/net/ethernet/allwinner/sun4i-emac.c b/drivers/net/ethernet/allwinner/sun4i-emac.c index 50b853a..38aba50 100644 --- a/drivers/net/ethernet/allwinner/sun4i-emac.c +++ b/drivers/net/ethernet/allwinner/sun4i-emac.c @@ -717,8 +717,8 @@ static int emac_open(struct net_device *dev) if (netif_msg_ifup(db)) dev_dbg(db->dev, "enabling %s\n", dev->name); - if (devm_request_irq(db->dev, dev->irq, &emac_interrupt, - 0, dev->name, dev)) + if (request_irq(dev->irq, &emac_interrupt, + 0, dev->name, dev)) return -EAGAIN; /* Initialize EMAC board */ @@ -774,6 +774,8 @@ static int emac_stop(struct net_device *ndev) emac_shutdown(ndev); + free_irq(ndev->irq, ndev); + return 0; } -- 1.8.4.2