From: fkan@apm.com (Feng Kan)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 1/1] gic: change access of gicc_ctrl register to read modify write.
Date: Sun, 8 Dec 2013 12:22:37 -0800 [thread overview]
Message-ID: <1386534157-17366-1-git-send-email-fkan@apm.com> (raw)
This change is made to preserve the GIC v2 releated bits in the
GIC_CPU_CTRL register (also known as the GICC_CTLR register in spec).
The original code only set the enable/disable group bit in this register.
This code will preserve all other bits configured by the bootload except
the enable/disable bit. The main reason for this change is to allow the
bypass bits specified in the v2 spec to remain untouched by the current
GIC code. In the X-Gene platform, the bypass functionality is not used
and bypass must be disabled at all time.
Signed-off-by: Vinayak Kale <vkale@apm.com>
Acked-by: Anup Patel <apatel@apm.com>
Signed-off-by: Feng Kan <fkan@apm.com>
---
drivers/irqchip/irq-gic.c | 19 ++++++++++++++++---
1 files changed, 16 insertions(+), 3 deletions(-)
diff --git a/drivers/irqchip/irq-gic.c b/drivers/irqchip/irq-gic.c
index d0e9480..6550ac9 100644
--- a/drivers/irqchip/irq-gic.c
+++ b/drivers/irqchip/irq-gic.c
@@ -419,6 +419,7 @@ static void gic_cpu_init(struct gic_chip_data *gic)
void __iomem *dist_base = gic_data_dist_base(gic);
void __iomem *base = gic_data_cpu_base(gic);
unsigned int cpu_mask, cpu = smp_processor_id();
+ unsigned int ctrl_mask;
int i;
/*
@@ -450,13 +451,21 @@ static void gic_cpu_init(struct gic_chip_data *gic)
writel_relaxed(0xa0a0a0a0, dist_base + GIC_DIST_PRI + i * 4 / 4);
writel_relaxed(0xf0, base + GIC_CPU_PRIMASK);
- writel_relaxed(1, base + GIC_CPU_CTRL);
+
+ ctrl_mask = readl(base + GIC_CPU_CTRL);
+ ctrl_mask |= 0x1;
+ writel_relaxed(ctrl_mask, base + GIC_CPU_CTRL);
}
void gic_cpu_if_down(void)
{
+ unsigned int ctrl_mask;
+
void __iomem *cpu_base = gic_data_cpu_base(&gic_data[0]);
- writel_relaxed(0, cpu_base + GIC_CPU_CTRL);
+
+ ctrl_mask = readl(base + GIC_CPU_CTRL);
+ ctrl_mask &= 0xfffffffe;
+ writel_relaxed(ctrl_mask, cpu_base + GIC_CPU_CTRL);
}
#ifdef CONFIG_CPU_PM
@@ -567,6 +576,7 @@ static void gic_cpu_restore(unsigned int gic_nr)
{
int i;
u32 *ptr;
+ unsigned int ctrl_mask;
void __iomem *dist_base;
void __iomem *cpu_base;
@@ -591,7 +601,10 @@ static void gic_cpu_restore(unsigned int gic_nr)
writel_relaxed(0xa0a0a0a0, dist_base + GIC_DIST_PRI + i * 4);
writel_relaxed(0xf0, cpu_base + GIC_CPU_PRIMASK);
- writel_relaxed(1, cpu_base + GIC_CPU_CTRL);
+
+ ctrl_mask = readl(base + GIC_CPU_CTRL);
+ ctrl_mask |= 0x1;
+ writel_relaxed(ctrl_mask, cpu_base + GIC_CPU_CTRL);
}
static int gic_notifier(struct notifier_block *self, unsigned long cmd, void *v)
--
1.7.6.1
next reply other threads:[~2013-12-08 20:22 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-12-08 20:22 Feng Kan [this message]
2014-01-23 0:59 ` [PATCH 1/1] gic: change access of gicc_ctrl register to read modify write Feng Kan
2014-01-23 1:01 ` Feng Kan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1386534157-17366-1-git-send-email-fkan@apm.com \
--to=fkan@apm.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox