From: sboyd@codeaurora.org (Stephen Boyd)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH] ARM: dts: msm: Fix gpio interrupt and reg length
Date: Tue, 10 Dec 2013 15:14:43 -0800 [thread overview]
Message-ID: <1386717283-30227-1-git-send-email-sboyd@codeaurora.org> (raw)
The summary interrupt is #16 in the SPI space. Unfortunately,
when this device was translated from board files to DT we forgot
to subtract 16 from the interrupt number to translate it into a
SPI interrupt. Also, the register space is larger than 4k, increase
it appropriately so that the gpio driver doesn't try to access
registers outside of its mapping.
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
---
arch/arm/boot/dts/qcom-msm8660-surf.dts | 4 ++--
arch/arm/boot/dts/qcom-msm8960-cdp.dts | 2 +-
2 files changed, 3 insertions(+), 3 deletions(-)
diff --git a/arch/arm/boot/dts/qcom-msm8660-surf.dts b/arch/arm/boot/dts/qcom-msm8660-surf.dts
index 8632991..12439f5 100644
--- a/arch/arm/boot/dts/qcom-msm8660-surf.dts
+++ b/arch/arm/boot/dts/qcom-msm8660-surf.dts
@@ -30,11 +30,11 @@
msmgpio: gpio at 800000 {
compatible = "qcom,msm-gpio";
- reg = <0x00800000 0x1000>;
+ reg = <0x00800000 0x4000>;
gpio-controller;
#gpio-cells = <2>;
ngpio = <173>;
- interrupts = <0 32 0x4>;
+ interrupts = <0 16 0x4>;
interrupt-controller;
#interrupt-cells = <2>;
};
diff --git a/arch/arm/boot/dts/qcom-msm8960-cdp.dts b/arch/arm/boot/dts/qcom-msm8960-cdp.dts
index cf0956c..3a84c9a 100644
--- a/arch/arm/boot/dts/qcom-msm8960-cdp.dts
+++ b/arch/arm/boot/dts/qcom-msm8960-cdp.dts
@@ -33,7 +33,7 @@
gpio-controller;
#gpio-cells = <2>;
ngpio = <150>;
- interrupts = <0 32 0x4>;
+ interrupts = <0 16 0x4>;
interrupt-controller;
#interrupt-cells = <2>;
reg = <0x800000 0x4000>;
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
hosted by The Linux Foundation
reply other threads:[~2013-12-10 23:14 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1386717283-30227-1-git-send-email-sboyd@codeaurora.org \
--to=sboyd@codeaurora.org \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).