From mboxrd@z Thu Jan 1 00:00:00 1970 From: p.wilczek@samsung.com (Piotr Wilczek) Date: Wed, 11 Dec 2013 14:07:31 +0100 Subject: [PATCH 0/8] Impedance matcher for Samsung boards Message-ID: <1386767259-15693-1-git-send-email-p.wilczek@samsung.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org This patchset implements the impedance-matcher for Samsung Exynos boards and does the following: - fix strncmp function; - ensure each DT blob is 4-byte aligned; - port 'atags_to_fdt' form Kernel; - add Exynos specific serial driver; - add support for Samsung boards, Trats and Trats2; This patch set is based on: https://github.com/zonque/pxa-impedance-matcher.git Piotr Wilczek (8): registers: add write u8 type string: fix strncmp function device tree blob must be 4-bytes alingned Makefile: disable generating Thumb code add memory operations add support to supplement atags to device tree serial: add Exynos specific serial driver board: add Samsung specific board support Makefile | 12 +- append_dtbs.sh | 11 + atags.h | 2 + atags_to_fdt.c | 197 ++++++ board-exynos.c | 77 +++ configs/Makefile.config.exynos | 13 + dtbs.c | 4 + fdt.c | 224 ++++++ fdt_ro.c | 576 ++++++++++++++++ fdt_rw.c | 494 ++++++++++++++ fdt_wip.c | 120 ++++ libfdt.h | 1478 ++++++++++++++++++++++++++++++++++++++++ libfdt_env.h | 13 + libfdt_internal.h | 95 +++ main.c | 4 + register.c | 10 + register.h | 3 + serial-exynos.c | 84 +++ setup.h | 187 +++++ string.c | 119 +++- string.h | 10 + types.h | 32 + 22 files changed, 3761 insertions(+), 4 deletions(-) create mode 100644 atags_to_fdt.c create mode 100644 board-exynos.c create mode 100644 configs/Makefile.config.exynos create mode 100644 fdt.c create mode 100644 fdt_ro.c create mode 100644 fdt_rw.c create mode 100644 fdt_wip.c create mode 100644 libfdt.h create mode 100644 libfdt_env.h create mode 100644 libfdt_internal.h create mode 100644 serial-exynos.c create mode 100644 setup.h -- 1.7.9.5