From mboxrd@z Thu Jan 1 00:00:00 1970 From: w-kwok2@ti.com (WingMan Kwok) Date: Thu, 12 Dec 2013 12:25:28 -0500 Subject: [PATCH v4 0/2] Kesytone II USB host and PHY drivers Message-ID: <1386869130-2993-1-git-send-email-w-kwok2@ti.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org Resending the series with suggested minor updates from v3 [1]. Series adds USB host support for Keystone SOCs. Keystone SOCs uses dwc3 hardware IP implementation. On Keystone II platforms, we use no-op phy driver. Patchset are tested on Keystone II EVM with USB2.0 and USB3.0 flash drives along with dts changes. Cc: Felipe Balbi Cc: Santosh Shilimkar WingMan Kwok (2): usb: dwc3: Add Keystone specific glue layer usb: phy: Add keystone usb phy driver drivers/usb/dwc3/Kconfig | 7 ++ drivers/usb/dwc3/Makefile | 1 + drivers/usb/dwc3/dwc3-keystone.c | 201 ++++++++++++++++++++++++++++++++++++++ drivers/usb/phy/Kconfig | 9 ++ drivers/usb/phy/Makefile | 1 + drivers/usb/phy/phy-keystone.c | 142 +++++++++++++++++++++++++++ 6 files changed, 361 insertions(+) create mode 100644 drivers/usb/dwc3/dwc3-keystone.c create mode 100644 drivers/usb/phy/phy-keystone.c [1] http://www.spinics.net/lists/linux-usb/msg99178.html -- 1.7.9.5