From mboxrd@z Thu Jan 1 00:00:00 1970 From: Li.Xiubo@freescale.com (Xiubo Li) Date: Fri, 13 Dec 2013 16:57:05 +0800 Subject: [PATCHv7 2/4] ARM: dts: Add Freescale FTM PWM node for VF610. In-Reply-To: <1386925027-16288-1-git-send-email-Li.Xiubo@freescale.com> References: <1386925027-16288-1-git-send-email-Li.Xiubo@freescale.com> Message-ID: <1386925027-16288-3-git-send-email-Li.Xiubo@freescale.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org This adds devicetree node for VF610, and there are 8 channels supported. Signed-off-by: Xiubo Li Reviewed-by: Sascha Hauer --- arch/arm/boot/dts/vf610.dtsi | 13 +++++++++++++ 1 file changed, 13 insertions(+) diff --git a/arch/arm/boot/dts/vf610.dtsi b/arch/arm/boot/dts/vf610.dtsi index 67d929c..9bea0b2 100644 --- a/arch/arm/boot/dts/vf610.dtsi +++ b/arch/arm/boot/dts/vf610.dtsi @@ -140,6 +140,19 @@ clock-names = "pit"; }; + pwm0: pwm at 40038000 { + compatible = "fsl,vf610-ftm-pwm"; + #pwm-cells = <3>; + reg = <0x40038000 0x1000>; + clock-names = "ftm_sys", "ftm_ext", + "ftm_fix", "ftm_cnt_clk_en"; + clocks = <&clks VF610_CLK_FTM0>, + <&clks VF610_CLK_FTM0_EXT_SEL>, + <&clks VF610_CLK_FTM0_FIX_SEL>, + <&clks VF610_CLK_FTM0_EXT_FIX_EN>; + status = "disabled"; + }; + wdog at 4003e000 { compatible = "fsl,vf610-wdt", "fsl,imx21-wdt"; reg = <0x4003e000 0x1000>; -- 1.8.4