From: jonas.jensen@gmail.com (Jonas Jensen)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v4 0/2] ARM: mach-moxart: add MOXA ART SoC support
Date: Fri, 13 Dec 2013 15:33:06 +0100 [thread overview]
Message-ID: <1386945188-8316-1-git-send-email-jonas.jensen@gmail.com> (raw)
This set adds MOXA ART SoC and platform support.
Changes since v3:
1. removed platform specific UART debug files,
replaced by generic code under DEBUG_LL_UART_8250.
arch/arm/mach-moxart/*:
2. select DMA_OF and PHYLIB
3. remove .init_time hook
4. reinsert restart code that rely on watchdog register
(watchdog maintainers rejected arm_pm_restart in watchdog code)
assign arm_pm_restart from .init_machine
5. move to ARCH_MULTI_V4T (ARCH_MULTI_V4 was removed)
arch/arm/boot/dts/moxart-uc7112lx.dts:
6. remove comments
7. add "mdio0"/"mdio1" nodes
8. add phy-handle/phy-mode to "mac0"/"mac1" nodes
9. change bootargs (change root=/dev/mtdblock2 to root=/dev/mmcblk0p1)
10. add gpio-leds node "leds"
11. add gpio-keys-polled node "gpio_keys_polled"
12. rename "mmc" node "sdhci"
arch/arm/boot/dts/moxart.dtsi:
13. add fixed-clock node "ref12"
14. remove "clk" node, add nodes "clk_pll"/"clk_apb"
15. add gpio-rtc-* (sclk|data|reset) to "rtc" node
16. add "dma" node
17. remove second register from "gpio" node
Applies to next-20131213
Jonas Jensen (2):
ARM: mach-moxart: add MOXA ART SoC platform files
ARM: mach-moxart: add MOXA ART SoC device tree files
Documentation/devicetree/bindings/arm/moxart.txt | 12 ++
arch/arm/Kconfig | 2 +
arch/arm/Makefile | 1 +
arch/arm/boot/dts/Makefile | 1 +
arch/arm/boot/dts/moxart-uc7112lx.dts | 131 ++++++++++++++++++++
arch/arm/boot/dts/moxart.dtsi | 100 +++++++++++++++
arch/arm/configs/moxart_defconfig | 148 +++++++++++++++++++++++
arch/arm/mach-moxart/Kconfig | 31 +++++
arch/arm/mach-moxart/Makefile | 3 +
arch/arm/mach-moxart/moxart.c | 75 ++++++++++++
10 files changed, 504 insertions(+)
create mode 100644 Documentation/devicetree/bindings/arm/moxart.txt
create mode 100644 arch/arm/boot/dts/moxart-uc7112lx.dts
create mode 100644 arch/arm/boot/dts/moxart.dtsi
create mode 100644 arch/arm/configs/moxart_defconfig
create mode 100644 arch/arm/mach-moxart/Kconfig
create mode 100644 arch/arm/mach-moxart/Makefile
create mode 100644 arch/arm/mach-moxart/moxart.c
--
1.8.2.1
next reply other threads:[~2013-12-13 14:33 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-12-13 14:33 Jonas Jensen [this message]
2013-12-13 14:33 ` [PATCH v4 1/2] ARM: mach-moxart: add MOXA ART SoC platform files Jonas Jensen
2013-12-13 16:17 ` Arnd Bergmann
2013-12-13 17:23 ` Jonas Jensen
2013-12-13 19:07 ` Guenter Roeck
2013-12-14 4:01 ` Arnd Bergmann
2013-12-14 8:32 ` Jonas Jensen
2013-12-14 15:50 ` Guenter Roeck
2013-12-14 16:26 ` Jonas Jensen
2013-12-14 18:50 ` Arnd Bergmann
2013-12-14 20:14 ` Guenter Roeck
2013-12-15 0:21 ` Arnd Bergmann
2013-12-22 19:48 ` Olof Johansson
2013-12-13 14:33 ` [PATCH v4 2/2] ARM: mach-moxart: add MOXA ART SoC device tree files Jonas Jensen
2013-12-13 16:17 ` Arnd Bergmann
2013-12-15 4:27 ` Peter Crosthwaite
2013-12-16 20:05 ` Jonas Jensen
2013-12-16 23:53 ` Peter Crosthwaite
2013-12-17 0:09 ` Sören Brinkmann
2013-12-22 19:49 ` Olof Johansson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1386945188-8316-1-git-send-email-jonas.jensen@gmail.com \
--to=jonas.jensen@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).