From: troy.kisky@boundarydevices.com (Troy Kisky)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH V2 11/13] ARM: dts: imx6qdl-sabrelite: fix ENET group
Date: Mon, 16 Dec 2013 18:13:01 -0700 [thread overview]
Message-ID: <1387242783-1462-12-git-send-email-troy.kisky@boundarydevices.com> (raw)
In-Reply-To: <1387242783-1462-1-git-send-email-troy.kisky@boundarydevices.com>
GPIO16 is used for I2C3, not ENET_REF_CLK.
Replace MX6QDL_ENET_PINGRP1 with explicit list.
Also, remove pull-ups from tx pins, and ENET_MDIO
which has an external pull-up.
Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>
Reviewed-by: Marek Vasut <marex@denx.de>
---
v2: minor change to commit message
---
arch/arm/boot/dts/imx6qdl-sabrelite.dtsi | 16 +++++++++++++++-
1 file changed, 15 insertions(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi b/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi
index 532a7e0..f1d8b24 100644
--- a/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi
@@ -216,7 +216,21 @@
pinctrl_enet: enetgrp {
fsl,pins = <
- MX6QDL_ENET_PINGRP1
+ MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x100b0
+ MX6QDL_PAD_ENET_MDC__ENET_MDC 0x100b0
+ MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x100b0
+ MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x100b0
+ MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x100b0
+ MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x100b0
+ MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x100b0
+ MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x100b0
+ MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x100b0
+ MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b0b0
+ MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b0b0
+ MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b0b0
+ MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b0b0
+ MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b0b0
+ MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b0b0
/* Phy reset */
MX6QDL_PAD_EIM_D23__GPIO3_IO23 0x000b0
>;
--
1.8.1.2
next prev parent reply other threads:[~2013-12-17 1:13 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-12-17 1:12 [PATCH V2 00/13] Update Sabre Lite Troy Kisky
2013-12-17 1:12 ` [PATCH V2 01/13] ARM: dts: imx6qdl-sabrelite: move pcie to imx6qdl-sabrelite.dtsi Troy Kisky
2013-12-17 1:12 ` [PATCH V2 02/13] ARM: dts: imx6qdl-sabrelite: move USDHC4 CD to pinctrl_usdhc4 Troy Kisky
2013-12-17 1:12 ` [PATCH V2 03/13] ARM: dts: imx6qdl-sabrelite: move USDHC3 CD/WP to pinctrl_usdhc3 Troy Kisky
2013-12-17 1:12 ` [PATCH V2 04/13] ARM: dts: imx6qdl-sabrelite: move spi-nor CS to pinctrl_ecspi1 Troy Kisky
2013-12-17 1:12 ` [PATCH V2 05/13] ARM: dts: imx6qdl-sabrelite: move usbotg power enable to pinctrl_usbotg Troy Kisky
2013-12-17 1:12 ` [PATCH V2 06/13] ARM: dts: imx6qdl-sabrelite: move phy reset to pinctrl_enet Troy Kisky
2013-12-17 1:12 ` [PATCH V2 07/13] ARM: dts: imx6qdl-sabrelite: explicitly set pad for SGTL5000 sys_mclk Troy Kisky
2013-12-17 1:12 ` [PATCH V2 08/13] ARM: dts: imx6qdl-sabrelite: add gpio-keys Troy Kisky
2013-12-17 13:46 ` Shawn Guo
2013-12-17 1:12 ` [PATCH V2 09/13] ARM: dts: imx6qdl-sabrelite: add pwms for backlights Troy Kisky
2013-12-17 1:13 ` [PATCH V2 10/13] ARM: dts: imx6qdl-sabrelite: add skews for Micrel phy Troy Kisky
2013-12-17 1:13 ` Troy Kisky [this message]
2013-12-17 1:13 ` [PATCH V2 12/13] ARM: dts: imx6qdl-sabrelite: Add over-current pin to usbotg Troy Kisky
2013-12-17 1:13 ` [PATCH V2 13/13] ARM: dts: imx: add nitrogen6x board Troy Kisky
2013-12-17 13:48 ` Shawn Guo
2013-12-17 18:49 ` Troy Kisky
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1387242783-1462-12-git-send-email-troy.kisky@boundarydevices.com \
--to=troy.kisky@boundarydevices.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).