From: troy.kisky@boundarydevices.com (Troy Kisky)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH V2 06/13] ARM: dts: imx6qdl-sabrelite: move phy reset to pinctrl_enet
Date: Mon, 16 Dec 2013 18:12:56 -0700 [thread overview]
Message-ID: <1387242783-1462-7-git-send-email-troy.kisky@boundarydevices.com> (raw)
In-Reply-To: <1387242783-1462-1-git-send-email-troy.kisky@boundarydevices.com>
This patch moves pin EIM_D23 (phy reset) from pinctrl_hog to pinctrl_enet.
It also explicitly sets the pad to 0x000b0.
Before this patch, it has the value 0x1b0b0 if using mainline u-boot.
So this patch also removes hysteresis and a 100K pullup since the pad
is always an output.
Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>
---
v2: New patch.. V1 patch to add comments was broken up into
multiple patches
---
arch/arm/boot/dts/imx6qdl-sabrelite.dtsi | 7 +++++--
1 file changed, 5 insertions(+), 2 deletions(-)
diff --git a/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi b/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi
index 2654ff1..ee3f5c0 100644
--- a/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi
@@ -114,7 +114,6 @@
imx6q-sabrelite {
pinctrl_hog: hoggrp {
fsl,pins = <
- MX6QDL_PAD_EIM_D23__GPIO3_IO23 0x80000000
MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x80000000
>;
};
@@ -131,7 +130,11 @@
};
pinctrl_enet: enetgrp {
- fsl,pins = <MX6QDL_ENET_PINGRP1>;
+ fsl,pins = <
+ MX6QDL_ENET_PINGRP1
+ /* Phy reset */
+ MX6QDL_PAD_EIM_D23__GPIO3_IO23 0x000b0
+ >;
};
pinctrl_i2c1: i2c1grp {
--
1.8.1.2
next prev parent reply other threads:[~2013-12-17 1:12 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-12-17 1:12 [PATCH V2 00/13] Update Sabre Lite Troy Kisky
2013-12-17 1:12 ` [PATCH V2 01/13] ARM: dts: imx6qdl-sabrelite: move pcie to imx6qdl-sabrelite.dtsi Troy Kisky
2013-12-17 1:12 ` [PATCH V2 02/13] ARM: dts: imx6qdl-sabrelite: move USDHC4 CD to pinctrl_usdhc4 Troy Kisky
2013-12-17 1:12 ` [PATCH V2 03/13] ARM: dts: imx6qdl-sabrelite: move USDHC3 CD/WP to pinctrl_usdhc3 Troy Kisky
2013-12-17 1:12 ` [PATCH V2 04/13] ARM: dts: imx6qdl-sabrelite: move spi-nor CS to pinctrl_ecspi1 Troy Kisky
2013-12-17 1:12 ` [PATCH V2 05/13] ARM: dts: imx6qdl-sabrelite: move usbotg power enable to pinctrl_usbotg Troy Kisky
2013-12-17 1:12 ` Troy Kisky [this message]
2013-12-17 1:12 ` [PATCH V2 07/13] ARM: dts: imx6qdl-sabrelite: explicitly set pad for SGTL5000 sys_mclk Troy Kisky
2013-12-17 1:12 ` [PATCH V2 08/13] ARM: dts: imx6qdl-sabrelite: add gpio-keys Troy Kisky
2013-12-17 13:46 ` Shawn Guo
2013-12-17 1:12 ` [PATCH V2 09/13] ARM: dts: imx6qdl-sabrelite: add pwms for backlights Troy Kisky
2013-12-17 1:13 ` [PATCH V2 10/13] ARM: dts: imx6qdl-sabrelite: add skews for Micrel phy Troy Kisky
2013-12-17 1:13 ` [PATCH V2 11/13] ARM: dts: imx6qdl-sabrelite: fix ENET group Troy Kisky
2013-12-17 1:13 ` [PATCH V2 12/13] ARM: dts: imx6qdl-sabrelite: Add over-current pin to usbotg Troy Kisky
2013-12-17 1:13 ` [PATCH V2 13/13] ARM: dts: imx: add nitrogen6x board Troy Kisky
2013-12-17 13:48 ` Shawn Guo
2013-12-17 18:49 ` Troy Kisky
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1387242783-1462-7-git-send-email-troy.kisky@boundarydevices.com \
--to=troy.kisky@boundarydevices.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).