From mboxrd@z Thu Jan 1 00:00:00 1970 From: andrew@lunn.ch (Andrew Lunn) Date: Tue, 17 Dec 2013 21:21:52 +0100 Subject: [PATCH 4/4] Phy: Add DT nodes on kirkwood and Dove for the SATA PHY In-Reply-To: <1387311713-1926-1-git-send-email-andrew@lunn.ch> References: <1387311713-1926-1-git-send-email-andrew@lunn.ch> Message-ID: <1387311713-1926-4-git-send-email-andrew@lunn.ch> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org Add nodes for the two SATA PHYs on kirkwood. Add node for the one SATA PHY on Dove. Add pHandles to the PHYs in the sata nodes. Signed-off-by: Andrew Lunn --- v1->v2: sata_phy at ... ->sata-phy@ value after '@' matching the first address in the reg. v2->v3: "0" -> "port0", etc. kirkewood -> kirkwood --- arch/arm/boot/dts/dove.dtsi | 11 +++++++++++ arch/arm/boot/dts/kirkwood-6281.dtsi | 2 ++ arch/arm/boot/dts/kirkwood-6282.dtsi | 2 ++ arch/arm/boot/dts/kirkwood.dtsi | 18 ++++++++++++++++++ 4 files changed, 33 insertions(+) diff --git a/arch/arm/boot/dts/dove.dtsi b/arch/arm/boot/dts/dove.dtsi index 113a8bc7bee7..198d03625832 100644 --- a/arch/arm/boot/dts/dove.dtsi +++ b/arch/arm/boot/dts/dove.dtsi @@ -490,10 +490,21 @@ reg = <0xa0000 0x2400>; interrupts = <62>; clocks = <&gate_clk 3>; + phys = <&sata_phy0>; + phy-names = "port0"; nr-ports = <1>; status = "disabled"; }; + sata_phy0: sata-phy at a2000 { + compatible = "marvell,mvebu-sata-phy"; + reg = <0xa2000 0x0334>; + clocks = <&gate_clk 3>; + clock-names = "sata"; + #phy-cells = <0>; + status = "ok"; + }; + rtc: real-time-clock at d8500 { compatible = "marvell,orion-rtc"; reg = <0xd8500 0x20>; diff --git a/arch/arm/boot/dts/kirkwood-6281.dtsi b/arch/arm/boot/dts/kirkwood-6281.dtsi index 650ef30e1856..18400e74e0de 100644 --- a/arch/arm/boot/dts/kirkwood-6281.dtsi +++ b/arch/arm/boot/dts/kirkwood-6281.dtsi @@ -89,6 +89,8 @@ interrupts = <21>; clocks = <&gate_clk 14>, <&gate_clk 15>; clock-names = "0", "1"; + phys = <&sata_phy0>, <&sata_phy1>; + phy-names = "port0", "port1"; status = "disabled"; }; diff --git a/arch/arm/boot/dts/kirkwood-6282.dtsi b/arch/arm/boot/dts/kirkwood-6282.dtsi index 3933a331ddc2..69c622bbbfb5 100644 --- a/arch/arm/boot/dts/kirkwood-6282.dtsi +++ b/arch/arm/boot/dts/kirkwood-6282.dtsi @@ -117,6 +117,8 @@ interrupts = <21>; clocks = <&gate_clk 14>, <&gate_clk 15>; clock-names = "0", "1"; + phys = <&sata_phy0>, <&sata_phy1>; + phy-names = "port0", "port1"; status = "disabled"; }; diff --git a/arch/arm/boot/dts/kirkwood.dtsi b/arch/arm/boot/dts/kirkwood.dtsi index 8b73c80f1dad..ee06951721c4 100644 --- a/arch/arm/boot/dts/kirkwood.dtsi +++ b/arch/arm/boot/dts/kirkwood.dtsi @@ -282,5 +282,23 @@ /* set phy-handle property in board file */ }; }; + + sata_phy0: sata-phy at 82000 { + compatible = "marvell,mvebu-sata-phy"; + reg = <0x82000 0x0334>; + clocks = <&gate_clk 14>; + clock-names = "sata"; + #phy-cells = <0>; + status = "ok"; + }; + + sata_phy1: sata-phy at 84000 { + compatible = "marvell,mvebu-sata-phy"; + reg = <0x84000 0x0334>; + clocks = <&gate_clk 15>; + clock-names = "sata"; + #phy-cells = <0>; + status = "ok"; + }; }; }; -- 1.8.5.1