* [PATCH] ARM: imx: enable cpufreq for i.mx6dl
2013-12-19 15:02 [PATCH] ARM: imx: enable cpufreq for i.mx6dl Anson Huang
@ 2013-12-19 3:13 ` Shawn Guo
0 siblings, 0 replies; 2+ messages in thread
From: Shawn Guo @ 2013-12-19 3:13 UTC (permalink / raw)
To: linux-arm-kernel
On Thu, Dec 19, 2013 at 10:02:10AM -0500, Anson Huang wrote:
> This patch adds cpufreq dts for i.mx6dl to support cpufreq driver.
>
> Signed-off-by: Anson Huang <b20788@freescale.com>
Applied, with patch subject changed to 'ARM: dts: imx6dl: enable cpufreq
support'.
Shawn
> ---
> arch/arm/boot/dts/imx6dl.dtsi | 20 ++++++++++++++++++++
> 1 file changed, 20 insertions(+)
>
> diff --git a/arch/arm/boot/dts/imx6dl.dtsi b/arch/arm/boot/dts/imx6dl.dtsi
> index b2f2699..e2ec0fb 100644
> --- a/arch/arm/boot/dts/imx6dl.dtsi
> +++ b/arch/arm/boot/dts/imx6dl.dtsi
> @@ -23,6 +23,26 @@
> device_type = "cpu";
> reg = <0>;
> next-level-cache = <&L2>;
> + operating-points = <
> + /* kHz uV */
> + 996000 1275000
> + 792000 1175000
> + 396000 1075000
> + >;
> + fsl,soc-operating-points = <
> + /* ARM kHz SOC-PU uV */
> + 996000 1175000
> + 792000 1175000
> + 396000 1175000
> + >;
> + clock-latency = <61036>; /* two CLK32 periods */
> + clocks = <&clks 104>, <&clks 6>, <&clks 16>,
> + <&clks 17>, <&clks 170>;
> + clock-names = "arm", "pll2_pfd2_396m", "step",
> + "pll1_sw", "pll1_sys";
> + arm-supply = <®_arm>;
> + pu-supply = <®_pu>;
> + soc-supply = <®_soc>;
> };
>
> cpu at 1 {
> --
> 1.7.9.5
>
>
^ permalink raw reply [flat|nested] 2+ messages in thread
* [PATCH] ARM: imx: enable cpufreq for i.mx6dl
@ 2013-12-19 15:02 Anson Huang
2013-12-19 3:13 ` Shawn Guo
0 siblings, 1 reply; 2+ messages in thread
From: Anson Huang @ 2013-12-19 15:02 UTC (permalink / raw)
To: linux-arm-kernel
This patch adds cpufreq dts for i.mx6dl to support cpufreq driver.
Signed-off-by: Anson Huang <b20788@freescale.com>
---
arch/arm/boot/dts/imx6dl.dtsi | 20 ++++++++++++++++++++
1 file changed, 20 insertions(+)
diff --git a/arch/arm/boot/dts/imx6dl.dtsi b/arch/arm/boot/dts/imx6dl.dtsi
index b2f2699..e2ec0fb 100644
--- a/arch/arm/boot/dts/imx6dl.dtsi
+++ b/arch/arm/boot/dts/imx6dl.dtsi
@@ -23,6 +23,26 @@
device_type = "cpu";
reg = <0>;
next-level-cache = <&L2>;
+ operating-points = <
+ /* kHz uV */
+ 996000 1275000
+ 792000 1175000
+ 396000 1075000
+ >;
+ fsl,soc-operating-points = <
+ /* ARM kHz SOC-PU uV */
+ 996000 1175000
+ 792000 1175000
+ 396000 1175000
+ >;
+ clock-latency = <61036>; /* two CLK32 periods */
+ clocks = <&clks 104>, <&clks 6>, <&clks 16>,
+ <&clks 17>, <&clks 170>;
+ clock-names = "arm", "pll2_pfd2_396m", "step",
+ "pll1_sw", "pll1_sys";
+ arm-supply = <®_arm>;
+ pu-supply = <®_pu>;
+ soc-supply = <®_soc>;
};
cpu at 1 {
--
1.7.9.5
^ permalink raw reply related [flat|nested] 2+ messages in thread
end of thread, other threads:[~2013-12-19 15:02 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2013-12-19 15:02 [PATCH] ARM: imx: enable cpufreq for i.mx6dl Anson Huang
2013-12-19 3:13 ` Shawn Guo
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).