From mboxrd@z Thu Jan 1 00:00:00 1970 From: b20788@freescale.com (Anson Huang) Date: Thu, 19 Dec 2013 13:17:25 -0500 Subject: [PATCH 3/3] thermal: imx: add clk info for thermal sensor In-Reply-To: <1387477045-19037-1-git-send-email-b20788@freescale.com> References: <1387477045-19037-1-git-send-email-b20788@freescale.com> Message-ID: <1387477045-19037-3-git-send-email-b20788@freescale.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org thermal sensor needs dedicated clock to work in correct way, so we need to add necessary clock info in dts. Signed-off-by: Anson Huang --- .../devicetree/bindings/thermal/imx-thermal.txt | 2 ++ 1 file changed, 2 insertions(+) diff --git a/Documentation/devicetree/bindings/thermal/imx-thermal.txt b/Documentation/devicetree/bindings/thermal/imx-thermal.txt index 541c25e..e518c6e 100644 --- a/Documentation/devicetree/bindings/thermal/imx-thermal.txt +++ b/Documentation/devicetree/bindings/thermal/imx-thermal.txt @@ -7,6 +7,7 @@ Required properties: - fsl,tempmon-data : phandle pointer to fuse controller that contains TEMPMON calibration data, e.g. OCOTP on imx6q. The details about calibration data can be found in SoC Reference Manual. +- clocks : thermal sensor's clock source. Example: @@ -14,4 +15,5 @@ tempmon { compatible = "fsl,imx6q-tempmon"; fsl,tempmon = <&anatop>; fsl,tempmon-data = <&ocotp>; + clocks = <&clks 172>; }; -- 1.7.9.5