From: b20788@freescale.com (Anson Huang)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH V2] ARM: imx: improve the comment of CCM lpm SW workaround
Date: Tue, 24 Dec 2013 17:19:21 -0500 [thread overview]
Message-ID: <1387923561-8724-1-git-send-email-b20788@freescale.com> (raw)
Improve the comment of SW workaround for CCM lpm issue using
hardware errata description to avoid confusion.
ERR007265:
CCM: When improper low-power sequence is used, the SoC enters
low power mode before the ARM core executes WFI.
Software workaround:
1) Software should trigger IRQ #32 (IOMUX) to be always pending
by setting IOMUX_GPR1_GINT.
2) Software should then unmask IRQ #32 in GPC before setting CCM
Low-Power mode.
3) Software should mask IRQ #32 right after CCM Low-Power mode is
set (set bits 0-1 of CCM_CLPCR).
Signed-off-by: Anson Huang <b20788@freescale.com>
---
arch/arm/mach-imx/pm-imx6q.c | 13 +++++++++----
1 file changed, 9 insertions(+), 4 deletions(-)
diff --git a/arch/arm/mach-imx/pm-imx6q.c b/arch/arm/mach-imx/pm-imx6q.c
index aecd9f8..31cb9d6 100644
--- a/arch/arm/mach-imx/pm-imx6q.c
+++ b/arch/arm/mach-imx/pm-imx6q.c
@@ -156,10 +156,13 @@ int imx6q_set_lpm(enum mxc_cpu_pwr_mode mode)
}
/*
- * Unmask the always pending IOMUXC interrupt #32 as wakeup source to
- * deassert dsm_request signal, so that we can ensure dsm_request
- * is not asserted when we're going to write CLPCR register to set LPM.
- * After setting up LPM bits, we need to mask this wakeup source.
+ * ERR007265:
+ * CCM: When improper low-power sequence is used, the SoC enters low power mode before the ARM core executes WFI.
+ *
+ * Software workaround:
+ * 1) Software should trigger IRQ #32 (IOMUX) to be always pending by setting IOMUX_GPR1_GINT.
+ * 2) Software should then unmask IRQ #32 in GPC before setting CCM Low-Power mode.
+ * 3) Software should mask IRQ #32 right after CCM Low-Power mode is set (set bits 0-1 of CCM_CLPCR).
*/
iomuxc_irq_desc = irq_to_desc(32);
imx_gpc_irq_unmask(&iomuxc_irq_desc->irq_data);
@@ -219,6 +222,8 @@ void __init imx6q_pm_init(void)
WARN_ON(!ccm_base);
/*
+ * This is for SW workaround step #1 of ERR007265, see comments
+ * in imx6q_set_lpm for details of this errata.
* Force IOMUXC irq pending, so that the interrupt to GPC can be
* used to deassert dsm_request signal when the signal gets
* asserted unexpectedly.
--
1.7.9.5
next reply other threads:[~2013-12-24 22:19 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-12-24 22:19 Anson Huang [this message]
2013-12-24 13:54 ` [PATCH V2] ARM: imx: improve the comment of CCM lpm SW workaround Shawn Guo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1387923561-8724-1-git-send-email-b20788@freescale.com \
--to=b20788@freescale.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).