From: marc.zyngier@arm.com (Marc Zyngier)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 04/15] KVM: arm-vgic: Support KVM_CREATE_DEVICE for VGIC
Date: Sat, 28 Dec 2013 11:15:36 +0000 [thread overview]
Message-ID: <1388229347-24185-5-git-send-email-marc.zyngier@arm.com> (raw)
In-Reply-To: <1388229347-24185-1-git-send-email-marc.zyngier@arm.com>
From: Christoffer Dall <christoffer.dall@linaro.org>
Support creating the ARM VGIC device through the KVM_CREATE_DEVICE
ioctl, which can then later be leveraged to use the
KVM_{GET/SET}_DEVICE_ATTR, which is useful both for setting addresses in
a more generic API than the ARM-specific one and is useful for
save/restore of VGIC state.
Adds KVM_CAP_DEVICE_CTRL to ARM capabilities.
Note that we change the check for creating a VGIC from bailing out if
any VCPUs were created, to bailing out if any VCPUs were ever run. This
is an important distinction that shouldn't break anything, but allows
creating the VGIC after the VCPUs have been created.
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
---
Documentation/virtual/kvm/devices/arm-vgic.txt | 10 ++++
arch/arm/kvm/arm.c | 1 +
include/linux/kvm_host.h | 1 +
include/uapi/linux/kvm.h | 1 +
virt/kvm/arm/vgic.c | 63 +++++++++++++++++++++++++-
virt/kvm/kvm_main.c | 5 ++
6 files changed, 79 insertions(+), 2 deletions(-)
create mode 100644 Documentation/virtual/kvm/devices/arm-vgic.txt
diff --git a/Documentation/virtual/kvm/devices/arm-vgic.txt b/Documentation/virtual/kvm/devices/arm-vgic.txt
new file mode 100644
index 0000000..38f27f7
--- /dev/null
+++ b/Documentation/virtual/kvm/devices/arm-vgic.txt
@@ -0,0 +1,10 @@
+ARM Virtual Generic Interrupt Controller (VGIC)
+===============================================
+
+Device types supported:
+ KVM_DEV_TYPE_ARM_VGIC_V2 ARM Generic Interrupt Controller v2.0
+
+Only one VGIC instance may be instantiated through either this API or the
+legacy KVM_CREATE_IRQCHIP api. The created VGIC will act as the VM interrupt
+controller, requiring emulated user-space devices to inject interrupts to the
+VGIC instead of directly to CPUs.
diff --git a/arch/arm/kvm/arm.c b/arch/arm/kvm/arm.c
index c9fe9d7..cc7c41a 100644
--- a/arch/arm/kvm/arm.c
+++ b/arch/arm/kvm/arm.c
@@ -190,6 +190,7 @@ int kvm_dev_ioctl_check_extension(long ext)
case KVM_CAP_IRQCHIP:
r = vgic_present;
break;
+ case KVM_CAP_DEVICE_CTRL:
case KVM_CAP_USER_MEMORY:
case KVM_CAP_SYNC_MMU:
case KVM_CAP_DESTROY_MEMORY_REGION_WORKS:
diff --git a/include/linux/kvm_host.h b/include/linux/kvm_host.h
index 4ecf107..1f46f66 100644
--- a/include/linux/kvm_host.h
+++ b/include/linux/kvm_host.h
@@ -1075,6 +1075,7 @@ struct kvm_device *kvm_device_from_filp(struct file *filp);
extern struct kvm_device_ops kvm_mpic_ops;
extern struct kvm_device_ops kvm_xics_ops;
extern struct kvm_device_ops kvm_vfio_ops;
+extern struct kvm_device_ops kvm_arm_vgic_v2_ops;
#ifdef CONFIG_HAVE_KVM_CPU_RELAX_INTERCEPT
diff --git a/include/uapi/linux/kvm.h b/include/uapi/linux/kvm.h
index 902f124..b647c29 100644
--- a/include/uapi/linux/kvm.h
+++ b/include/uapi/linux/kvm.h
@@ -853,6 +853,7 @@ struct kvm_device_attr {
#define KVM_DEV_VFIO_GROUP 1
#define KVM_DEV_VFIO_GROUP_ADD 1
#define KVM_DEV_VFIO_GROUP_DEL 2
+#define KVM_DEV_TYPE_ARM_VGIC_V2 5
/*
* ioctls for VM fds
diff --git a/virt/kvm/arm/vgic.c b/virt/kvm/arm/vgic.c
index 5e9df47..b15d6c1 100644
--- a/virt/kvm/arm/vgic.c
+++ b/virt/kvm/arm/vgic.c
@@ -1433,20 +1433,45 @@ out:
int kvm_vgic_create(struct kvm *kvm)
{
- int ret = 0;
+ int i, vcpu_lock_idx = -1, ret = 0;
+ struct kvm_vcpu *vcpu;
mutex_lock(&kvm->lock);
- if (atomic_read(&kvm->online_vcpus) || kvm->arch.vgic.vctrl_base) {
+ if (kvm->arch.vgic.vctrl_base) {
ret = -EEXIST;
goto out;
}
+ /*
+ * Any time a vcpu is run, vcpu_load is called which tries to grab the
+ * vcpu->mutex. By grabbing the vcpu->mutex of all VCPUs we ensure
+ * that no other VCPUs are run while we create the vgic.
+ */
+ kvm_for_each_vcpu(i, vcpu, kvm) {
+ if (!mutex_trylock(&vcpu->mutex))
+ goto out_unlock;
+ vcpu_lock_idx = i;
+ }
+
+ kvm_for_each_vcpu(i, vcpu, kvm) {
+ if (vcpu->arch.has_run_once) {
+ ret = -EBUSY;
+ goto out_unlock;
+ }
+ }
+
spin_lock_init(&kvm->arch.vgic.lock);
kvm->arch.vgic.vctrl_base = vgic_vctrl_base;
kvm->arch.vgic.vgic_dist_base = VGIC_ADDR_UNDEF;
kvm->arch.vgic.vgic_cpu_base = VGIC_ADDR_UNDEF;
+out_unlock:
+ for (; vcpu_lock_idx >= 0; vcpu_lock_idx--) {
+ vcpu = kvm_get_vcpu(kvm, vcpu_lock_idx);
+ mutex_unlock(&vcpu->mutex);
+ }
+
out:
mutex_unlock(&kvm->lock);
return ret;
@@ -1510,3 +1535,37 @@ int kvm_vgic_set_addr(struct kvm *kvm, unsigned long type, u64 addr)
mutex_unlock(&kvm->lock);
return r;
}
+
+static int vgic_set_attr(struct kvm_device *dev, struct kvm_device_attr *attr)
+{
+ return -ENXIO;
+}
+
+static int vgic_get_attr(struct kvm_device *dev, struct kvm_device_attr *attr)
+{
+ return -ENXIO;
+}
+
+static int vgic_has_attr(struct kvm_device *dev, struct kvm_device_attr *attr)
+{
+ return -ENXIO;
+}
+
+static void vgic_destroy(struct kvm_device *dev)
+{
+ kfree(dev);
+}
+
+static int vgic_create(struct kvm_device *dev, u32 type)
+{
+ return kvm_vgic_create(dev->kvm);
+}
+
+struct kvm_device_ops kvm_arm_vgic_v2_ops = {
+ .name = "kvm-arm-vgic",
+ .create = vgic_create,
+ .destroy = vgic_destroy,
+ .set_attr = vgic_set_attr,
+ .get_attr = vgic_get_attr,
+ .has_attr = vgic_has_attr,
+};
diff --git a/virt/kvm/kvm_main.c b/virt/kvm/kvm_main.c
index 03c97e7..3efba97 100644
--- a/virt/kvm/kvm_main.c
+++ b/virt/kvm/kvm_main.c
@@ -2273,6 +2273,11 @@ static int kvm_ioctl_create_device(struct kvm *kvm,
ops = &kvm_vfio_ops;
break;
#endif
+#ifdef CONFIG_KVM_ARM_VGIC
+ case KVM_DEV_TYPE_ARM_VGIC_V2:
+ ops = &kvm_arm_vgic_v2_ops;
+ break;
+#endif
default:
return -ENODEV;
}
--
1.8.5.1
next prev parent reply other threads:[~2013-12-28 11:15 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-12-28 11:15 [PULL 00/15] KVM/{arm,arm64} updates for 3.14 Marc Zyngier
2013-12-28 11:15 ` [PATCH 01/15] arm/arm64: KVM: arch_timer: Initialize cntvoff at kvm_init Marc Zyngier
2013-12-28 11:15 ` [PATCH 02/15] ARM/KVM: save and restore generic timer registers Marc Zyngier
2013-12-28 11:15 ` [PATCH 03/15] ARM: KVM: Allow creating the VGIC after VCPUs Marc Zyngier
2013-12-28 11:15 ` Marc Zyngier [this message]
2013-12-28 11:15 ` [PATCH 05/15] KVM: arm-vgic: Set base addr through device API Marc Zyngier
2013-12-28 11:15 ` [PATCH 06/15] irqchip: arm-gic: Define additional MMIO offsets and masks Marc Zyngier
2013-12-28 11:15 ` [PATCH 07/15] KVM: arm-vgic: Make vgic mmio functions more generic Marc Zyngier
2013-12-28 11:15 ` [PATCH 08/15] arm/arm64: kvm: Set vcpu->cpu to -1 on vcpu_put Marc Zyngier
2013-12-28 11:15 ` [PATCH 09/15] KVM: arm-vgic: Add vgic reg access from dev attr Marc Zyngier
2013-12-28 11:15 ` [PATCH 10/15] KVM: arm-vgic: Support unqueueing of LRs to the dist Marc Zyngier
2013-12-28 11:15 ` [PATCH 11/15] KVM: arm-vgic: Add GICD_SPENDSGIR and GICD_CPENDSGIR handlers Marc Zyngier
2013-12-28 11:15 ` [PATCH 12/15] KVM: arm-vgic: Support CPU interface reg access Marc Zyngier
2013-12-28 11:15 ` [PATCH 13/15] arm64: KVM: Add Kconfig option for max VCPUs per-Guest Marc Zyngier
2013-12-28 11:15 ` [PATCH 14/15] arm64: KVM: Support X-Gene guest VCPU on APM X-Gene host Marc Zyngier
2013-12-28 11:15 ` [PATCH 15/15] arm64: KVM: Force undefined exception for Guest SMC intructions Marc Zyngier
2013-12-31 19:25 ` [PULL 00/15] KVM/{arm,arm64} updates for 3.14 Marcelo Tosatti
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1388229347-24185-5-git-send-email-marc.zyngier@arm.com \
--to=marc.zyngier@arm.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).