From mboxrd@z Thu Jan 1 00:00:00 1970 From: daniel.lezcano@linaro.org (Daniel Lezcano) Date: Mon, 30 Dec 2013 11:19:20 +0100 Subject: [PATCH 01/20] clockevent: sun4i: Fill the irq field in the clockevent structure In-Reply-To: <52C1479E.80808@linaro.org> References: <52C1479E.80808@linaro.org> Message-ID: <1388398779-11222-1-git-send-email-daniel.lezcano@linaro.org> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org From: Maxime Ripard The clock event structure irq field was not filled previously to the interrupt we're using. This was resulting in the timer not being used at all when using a configuration with SMP enabled on a system with several CPUs, and with the cpumask set to the cpu_possible_mask. Signed-off-by: Maxime Ripard Signed-off-by: Daniel Lezcano Reviewed-by: Stephen Boyd --- drivers/clocksource/sun4i_timer.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/clocksource/sun4i_timer.c b/drivers/clocksource/sun4i_timer.c index 2fb4695..a7f492e 100644 --- a/drivers/clocksource/sun4i_timer.c +++ b/drivers/clocksource/sun4i_timer.c @@ -188,6 +188,7 @@ static void __init sun4i_timer_init(struct device_node *node) writel(val | TIMER_IRQ_EN(0), timer_base + TIMER_IRQ_EN_REG); sun4i_clockevent.cpumask = cpumask_of(0); + sun4i_clockevent.irq = irq; clockevents_config_and_register(&sun4i_clockevent, rate, TIMER_SYNC_TICKS, 0xffffffff); -- 1.7.9.5