From mboxrd@z Thu Jan 1 00:00:00 1970 From: b32955@freescale.com (Huang Shijie) Date: Fri, 3 Jan 2014 11:01:41 +0800 Subject: [PATCH 2/3] mtd: gpmi: do not use the mtd->writesize In-Reply-To: References: Message-ID: <1388718102-26097-3-git-send-email-b32955@freescale.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org The nfc_geo->payload_size is equal to the mtd->writesize now, use the nfc_geo->payload_size to replace the mtd->writesize. This patch makes preparation for the gpmi's subpage read support. In the subpage support, the nfc_geo->payload_size maybe smaller then the mtd->writesize. Signed-off-by: Huang Shijie --- drivers/mtd/nand/gpmi-nand/gpmi-nand.c | 6 +++--- 1 files changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/mtd/nand/gpmi-nand/gpmi-nand.c b/drivers/mtd/nand/gpmi-nand/gpmi-nand.c index 1908709..c92df74 100644 --- a/drivers/mtd/nand/gpmi-nand/gpmi-nand.c +++ b/drivers/mtd/nand/gpmi-nand/gpmi-nand.c @@ -1010,7 +1010,7 @@ static int gpmi_ecc_read_page(struct mtd_info *mtd, struct nand_chip *chip, int ret; dev_dbg(this->dev, "page number is : %d\n", page); - ret = read_page_prepare(this, buf, mtd->writesize, + ret = read_page_prepare(this, buf, nfc_geo->payload_size, this->payload_virt, this->payload_phys, nfc_geo->payload_size, &payload_virt, &payload_phys); @@ -1024,7 +1024,7 @@ static int gpmi_ecc_read_page(struct mtd_info *mtd, struct nand_chip *chip, /* go! */ ret = gpmi_read_page(this, payload_phys, auxiliary_phys); - read_page_end(this, buf, mtd->writesize, + read_page_end(this, buf, nfc_geo->payload_size, this->payload_virt, this->payload_phys, nfc_geo->payload_size, payload_virt, payload_phys); @@ -1079,7 +1079,7 @@ static int gpmi_ecc_read_page(struct mtd_info *mtd, struct nand_chip *chip, chip->oob_poi[0] = ((uint8_t *) auxiliary_virt)[0]; } - read_page_swap_end(this, buf, mtd->writesize, + read_page_swap_end(this, buf, nfc_geo->payload_size, this->payload_virt, this->payload_phys, nfc_geo->payload_size, payload_virt, payload_phys); -- 1.7.2.rc3