From mboxrd@z Thu Jan 1 00:00:00 1970 From: geert@linux-m68k.org (Geert Uytterhoeven) Date: Fri, 3 Jan 2014 16:34:16 +0100 Subject: [PATCH 3/3] ARM: shmobile: Koelsch: Add QSPI support In-Reply-To: <1388763256-25851-1-git-send-email-geert@linux-m68k.org> References: <1388763256-25851-1-git-send-email-geert@linux-m68k.org> Message-ID: <1388763256-25851-4-git-send-email-geert@linux-m68k.org> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org From: Geert Uytterhoeven Enable support for the Spansion s25fl512s SPI FLASH on the Koelsch board: - Add QSPI platform device, resources, platform data, and pinmux, - Add FLASH data and MTD partitions. Signed-off-by: Geert Uytterhoeven --- arch/arm/mach-shmobile/board-koelsch.c | 61 ++++++++++++++++++++++++++++++++ 1 file changed, 61 insertions(+) diff --git a/arch/arm/mach-shmobile/board-koelsch.c b/arch/arm/mach-shmobile/board-koelsch.c index de7cc64b1f37..723ed54b38be 100644 --- a/arch/arm/mach-shmobile/board-koelsch.c +++ b/arch/arm/mach-shmobile/board-koelsch.c @@ -25,12 +25,17 @@ #include #include #include +#include +#include #include #include #include #include #include #include +#include +#include +#include #include #include #include @@ -148,6 +153,55 @@ static const struct gpio_keys_platform_data koelsch_keys_pdata __initconst = { .nbuttons = ARRAY_SIZE(gpio_buttons), }; +/* QSPI */ +static const struct resource qspi_resources[] __initconst = { + DEFINE_RES_MEM(0xe6b10000, 0x1000), + DEFINE_RES_IRQ(gic_spi(184)), +}; + +static const struct rspi_plat_data qspi_pdata __initconst = { + .num_chipselect = 1, +}; + +/* SPI Flash memory (Spansion S25FL512SAGMFIG11 64 MiB) */ +static struct mtd_partition spi_flash_part[] = { + { + .name = "loader", + .offset = 0x00000000, + .size = 512 * 1024, + .mask_flags = MTD_WRITEABLE, + }, + { + .name = "bootenv", + .offset = MTDPART_OFS_APPEND, + .size = 512 * 1024, + .mask_flags = MTD_WRITEABLE, + }, + { + .name = "data", + .offset = MTDPART_OFS_APPEND, + .size = MTDPART_SIZ_FULL, + }, +}; + +static const struct flash_platform_data spi_flash_data = { + .name = "m25p80", + .parts = spi_flash_part, + .nr_parts = ARRAY_SIZE(spi_flash_part), + .type = "s25fl512s", +}; + +static const struct spi_board_info spi_info[] __initconst = { + { + .modalias = "m25p80", + .platform_data = &spi_flash_data, + .mode = SPI_MODE_0, + .max_speed_hz = 30000000, + .bus_num = 0, + .chip_select = 0, + }, +}; + static const struct pinctrl_map koelsch_pinctrl_map[] = { /* DU */ PIN_MAP_MUX_GROUP_DEFAULT("rcar-du-r8a7791", "pfc-r8a7791", @@ -165,6 +219,8 @@ static const struct pinctrl_map koelsch_pinctrl_map[] = { "eth_rmii", "eth"), PIN_MAP_MUX_GROUP_DEFAULT("r8a7791-ether", "pfc-r8a7791", "intc_irq0", "intc"), + /* QSPI */ + PIN_MAP_MUX_GROUP_DEFAULT("qspi.0", "pfc-r8a7791", "qspi", "qspi"), /* SCIF0 (CN19: DEBUG SERIAL0) */ PIN_MAP_MUX_GROUP_DEFAULT("sh-sci.6", "pfc-r8a7791", "scif0_data_d", "scif0"), @@ -190,6 +246,11 @@ static void __init koelsch_add_standard_devices(void) platform_device_register_data(&platform_bus, "gpio-keys", -1, &koelsch_keys_pdata, sizeof(koelsch_keys_pdata)); + platform_device_register_resndata(&platform_bus, "qspi", 0, + qspi_resources, + ARRAY_SIZE(qspi_resources), + &qspi_pdata, sizeof(qspi_pdata)); + spi_register_board_info(spi_info, ARRAY_SIZE(spi_info)); koelsch_add_du_device(); } -- 1.7.9.5