linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: lee.jones@linaro.org (Lee Jones)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v4 10/37] mtd: st_spi_fsm: Dynamically setup flash device based on JEDEC ID
Date: Wed,  8 Jan 2014 13:46:53 +0000	[thread overview]
Message-ID: <1389188840-14306-11-git-send-email-lee.jones@linaro.org> (raw)
In-Reply-To: <1389188840-14306-1-git-send-email-lee.jones@linaro.org>

Using previously added infrastructure we can now extract a device's JEDEC
ID, compare it to a list of known and supported devices and make assumptions
based on known characteristics of a given chip.

Signed-off-by: Lee Jones <lee.jones@linaro.org>
---
 drivers/mtd/devices/st_spi_fsm.c | 27 ++++++++++++++++++++++++++-
 1 file changed, 26 insertions(+), 1 deletion(-)

diff --git a/drivers/mtd/devices/st_spi_fsm.c b/drivers/mtd/devices/st_spi_fsm.c
index 455deef..a70e916 100644
--- a/drivers/mtd/devices/st_spi_fsm.c
+++ b/drivers/mtd/devices/st_spi_fsm.c
@@ -240,6 +240,7 @@ struct stfsm {
 	struct resource		*region;
 	struct mtd_info		mtd;
 	struct mutex		lock;
+	struct flash_info       *info;
 
 	uint32_t                fifo_dir_delay;
 };
@@ -508,6 +509,7 @@ static void stfsm_read_jedec(struct stfsm *fsm, uint8_t *const jedec)
 
 static struct flash_info *stfsm_jedec_probe(struct stfsm *fsm)
 {
+	struct flash_info	*info;
 	u16                     ext_jedec;
 	u32			jedec;
 	u8			id[5];
@@ -525,6 +527,15 @@ static struct flash_info *stfsm_jedec_probe(struct stfsm *fsm)
 	dev_dbg(fsm->dev, "JEDEC =  0x%08x [%02x %02x %02x %02x %02x]\n",
 		jedec, id[0], id[1], id[2], id[3], id[4]);
 
+	for (info = flash_types; info->name; info++) {
+		if (info->jedec_id == jedec) {
+			if (info->ext_id && info->ext_id != ext_jedec)
+				continue;
+			return info;
+		}
+	}
+	dev_err(fsm->dev, "Unrecognized JEDEC id %06x\n", jedec);
+
 	return NULL;
 }
 
@@ -619,6 +630,7 @@ static int stfsm_init(struct stfsm *fsm)
 static int stfsm_probe(struct platform_device *pdev)
 {
 	struct device_node *np = pdev->dev.of_node;
+	struct flash_info *info;
 	struct resource *res;
 	struct stfsm *fsm;
 	int ret;
@@ -665,7 +677,11 @@ static int stfsm_probe(struct platform_device *pdev)
 	}
 
 	/* Detect SPI FLASH device */
-	stfsm_jedec_probe(fsm);
+	info = stfsm_jedec_probe(fsm);
+	if (!info)
+		return -ENODEV;
+
+	fsm->info = info;
 
 	platform_set_drvdata(pdev, fsm);
 
@@ -674,6 +690,15 @@ static int stfsm_probe(struct platform_device *pdev)
 	fsm->mtd.writesize	= 4;
 	fsm->mtd.writebufsize	= fsm->mtd.writesize;
 	fsm->mtd.flags		= MTD_CAP_NORFLASH;
+	fsm->mtd.size		= info->sector_size * info->n_sectors;
+	fsm->mtd.erasesize	= info->sector_size;
+
+	dev_err(&pdev->dev,
+		"Found serial flash device: %s\n"
+		" size = %llx (%lldMiB) erasesize = 0x%08x (%uKiB)\n",
+		info->name,
+		(long long)fsm->mtd.size, (long long)(fsm->mtd.size >> 20),
+		fsm->mtd.erasesize, (fsm->mtd.erasesize >> 10));
 
 	return mtd_device_parse_register(&fsm->mtd, NULL, NULL, NULL, 0);
 }
-- 
1.8.3.2

  parent reply	other threads:[~2014-01-08 13:46 UTC|newest]

Thread overview: 42+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-01-08 13:46 [PATCH v4 00/36] mtd: st_spi_fsm: Add new driver Lee Jones
2014-01-08 13:46 ` [PATCH v4 01/37] mtd: st_spi_fsm: Allocate resources and register with MTD framework Lee Jones
2014-01-08 13:46 ` [PATCH v4 02/37] mtd: st_spi_fsm: Supply all register address and bit logic defines Lee Jones
2014-01-08 13:46 ` [PATCH v4 03/37] mtd: st_spi_fsm: Initialise and configure the FSM for normal working conditions Lee Jones
2014-01-08 13:46 ` [PATCH v4 04/37] mtd: st_spi_fsm: Supply framework for device requests Lee Jones
2014-01-08 13:46 ` [PATCH v4 05/37] mtd: st_spi_fsm: Supply a method to read from the FSM's FIFO Lee Jones
2014-01-08 13:46 ` [PATCH v4 06/37] mtd: st_spi_fsm: Supply defines for the possible flash command opcodes Lee Jones
2014-01-08 13:46 ` [PATCH v4 07/37] mtd: st_spi_fsm: Add support for JEDEC ID extraction Lee Jones
2014-01-08 13:46 ` [PATCH v4 08/37] mtd: devices: Provide header for shared OPCODEs and SFDP commands Lee Jones
2014-01-08 13:46 ` [PATCH v4 09/37] mtd: st_spi_fsm: Provide device look-up table Lee Jones
2014-01-08 13:46 ` Lee Jones [this message]
2014-01-08 13:46 ` [PATCH v4 11/37] mtd: st_spi_fsm: Search for preferred FSM message sequence configurations Lee Jones
2014-01-08 13:46 ` [PATCH v4 12/37] mtd: st_spi_fsm: Fetch platform specific configurations Lee Jones
2014-01-08 13:46 ` [PATCH v4 13/37] mtd: st_spi_fsm: Prepare the read/write FSM message sequence(s) Lee Jones
2014-01-08 13:46 ` [PATCH v4 14/37] mtd: st_spi_fsm: Add device-tree binding documentation Lee Jones
2014-01-08 13:46 ` [PATCH v4 15/37] mtd: st_spi_fsm: Fetch boot-device from mode pins Lee Jones
2014-01-08 13:46 ` [PATCH v4 16/37] mtd: st_spi_fsm: Provide the erase one sector sequence Lee Jones
2014-01-08 13:47 ` [PATCH v4 17/37] mtd: st_spi_fsm: Provide the sequence for enabling 32bit addressing mode Lee Jones
2014-01-08 13:47 ` [PATCH v4 18/37] mtd: st_spi_fsm: Prepare read/write sequences according to configuration Lee Jones
2014-01-08 13:47 ` [PATCH v4 19/37] mtd: st_spi_fsm: Add a check to if the chip can handle an SoC reset Lee Jones
2014-01-08 13:47 ` [PATCH v4 20/37] mtd: st_spi_fsm: Provide a method to put the chip into 32bit addressing mode Lee Jones
2014-01-08 13:47 ` [PATCH v4 21/37] mtd: st_spi_fsm: Update the flash Volatile Configuration Register Lee Jones
2014-01-08 13:47 ` [PATCH v4 22/37] mtd: st_spi_fsm: Provide the default read/write configurations Lee Jones
2014-01-08 13:47 ` [PATCH v4 23/37] mtd: st_spi_fsm: Supply the N25Qxxx specific read configurations Lee Jones
2014-01-08 13:47 ` [PATCH v4 24/37] mtd: st_spi_fsm: Supply the N25Qxxx chip specific configuration call-back Lee Jones
2014-01-08 13:47 ` [PATCH v4 25/37] mtd: st_spi_fsm: Prepare default sequences for read/write/erase Lee Jones
2014-01-08 13:47 ` [PATCH v4 26/37] mtd: st_spi_fsm: Add the ability to read from a Serial Flash device Lee Jones
2014-01-08 13:47 ` [PATCH v4 27/37] mtd: st_spi_fsm: Write to Flash via the FSM FIFO Lee Jones
2014-01-08 13:47 ` [PATCH v4 28/37] mtd: st_spi_fsm: Supply a busy wait for post-write status Lee Jones
2014-01-08 13:47 ` [PATCH v4 29/37] mtd: st_spi_fsm: Add the ability to write to a Serial Flash device Lee Jones
2014-01-08 13:47 ` [PATCH v4 30/37] mtd: st_spi_fsm: Erase partly or as a whole " Lee Jones
2014-01-08 13:47 ` [PATCH v4 31/37] mtd: st_spi_fsm: Add the ability to read the FSM's status Lee Jones
2014-01-08 13:47 ` [PATCH v4 32/37] mtd: st_spi_fsm: Add the ability to write to FSM's status register Lee Jones
2014-01-08 13:47 ` [PATCH v4 33/37] mtd: st_spi_fsm: Supply the MX25xxx chip specific configuration call-back Lee Jones
2014-01-08 13:47 ` [PATCH v4 34/37] mtd: st_spi_fsm: Supply the S25FLxxx " Lee Jones
2014-01-08 13:47 ` [PATCH v4 35/37] mtd: st_spi_fsm: Supply the W25Qxxx " Lee Jones
2014-01-08 13:47 ` [PATCH v4 36/37] mtd: st_spi_fsm: Move runtime configurable msg sequences into device's struct Lee Jones
2014-01-08 13:47 ` [PATCH v4 37/37] ARM: STi: Add support for the FSM Serial Flash Controller Lee Jones
2014-01-08 14:33 ` [PATCH v4 00/36] mtd: st_spi_fsm: Add new driver Lee Jones
2014-01-22 12:50   ` Lee Jones
2014-01-23  1:46     ` Brian Norris
2014-02-24 11:39       ` Lee Jones

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1389188840-14306-11-git-send-email-lee.jones@linaro.org \
    --to=lee.jones@linaro.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).