From: lee.jones@linaro.org (Lee Jones)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v4 12/37] mtd: st_spi_fsm: Fetch platform specific configurations
Date: Wed, 8 Jan 2014 13:46:55 +0000 [thread overview]
Message-ID: <1389188840-14306-13-git-send-email-lee.jones@linaro.org> (raw)
In-Reply-To: <1389188840-14306-1-git-send-email-lee.jones@linaro.org>
All supported platforms are able to pass specific configurations via
the Device Tree on boot. Here we add a function which is to be called
during the probing process which will extract them, or make other
assumptions based on capabilities provided.
Signed-off-by: Lee Jones <lee.jones@linaro.org>
---
drivers/mtd/devices/st_spi_fsm.c | 12 ++++++++++++
1 file changed, 12 insertions(+)
diff --git a/drivers/mtd/devices/st_spi_fsm.c b/drivers/mtd/devices/st_spi_fsm.c
index efd8fdb..1803f94 100644
--- a/drivers/mtd/devices/st_spi_fsm.c
+++ b/drivers/mtd/devices/st_spi_fsm.c
@@ -654,6 +654,16 @@ static int stfsm_init(struct stfsm *fsm)
return 0;
}
+static void stfsm_fetch_platform_configs(struct platform_device *pdev)
+{
+ struct stfsm *fsm = platform_get_drvdata(pdev);
+ struct flash_info *info = fsm->info;
+
+ /* Use device size to determine address width */
+ if (info->sector_size * info->n_sectors > 0xFFFFFF)
+ info->flags |= FLASH_FLAG_32BIT_ADDR;
+}
+
static int stfsm_probe(struct platform_device *pdev)
{
struct device_node *np = pdev->dev.of_node;
@@ -712,6 +722,8 @@ static int stfsm_probe(struct platform_device *pdev)
platform_set_drvdata(pdev, fsm);
+ stfsm_fetch_platform_configs(pdev);
+
fsm->mtd.dev.parent = &pdev->dev;
fsm->mtd.type = MTD_NORFLASH;
fsm->mtd.writesize = 4;
--
1.8.3.2
next prev parent reply other threads:[~2014-01-08 13:46 UTC|newest]
Thread overview: 42+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-01-08 13:46 [PATCH v4 00/36] mtd: st_spi_fsm: Add new driver Lee Jones
2014-01-08 13:46 ` [PATCH v4 01/37] mtd: st_spi_fsm: Allocate resources and register with MTD framework Lee Jones
2014-01-08 13:46 ` [PATCH v4 02/37] mtd: st_spi_fsm: Supply all register address and bit logic defines Lee Jones
2014-01-08 13:46 ` [PATCH v4 03/37] mtd: st_spi_fsm: Initialise and configure the FSM for normal working conditions Lee Jones
2014-01-08 13:46 ` [PATCH v4 04/37] mtd: st_spi_fsm: Supply framework for device requests Lee Jones
2014-01-08 13:46 ` [PATCH v4 05/37] mtd: st_spi_fsm: Supply a method to read from the FSM's FIFO Lee Jones
2014-01-08 13:46 ` [PATCH v4 06/37] mtd: st_spi_fsm: Supply defines for the possible flash command opcodes Lee Jones
2014-01-08 13:46 ` [PATCH v4 07/37] mtd: st_spi_fsm: Add support for JEDEC ID extraction Lee Jones
2014-01-08 13:46 ` [PATCH v4 08/37] mtd: devices: Provide header for shared OPCODEs and SFDP commands Lee Jones
2014-01-08 13:46 ` [PATCH v4 09/37] mtd: st_spi_fsm: Provide device look-up table Lee Jones
2014-01-08 13:46 ` [PATCH v4 10/37] mtd: st_spi_fsm: Dynamically setup flash device based on JEDEC ID Lee Jones
2014-01-08 13:46 ` [PATCH v4 11/37] mtd: st_spi_fsm: Search for preferred FSM message sequence configurations Lee Jones
2014-01-08 13:46 ` Lee Jones [this message]
2014-01-08 13:46 ` [PATCH v4 13/37] mtd: st_spi_fsm: Prepare the read/write FSM message sequence(s) Lee Jones
2014-01-08 13:46 ` [PATCH v4 14/37] mtd: st_spi_fsm: Add device-tree binding documentation Lee Jones
2014-01-08 13:46 ` [PATCH v4 15/37] mtd: st_spi_fsm: Fetch boot-device from mode pins Lee Jones
2014-01-08 13:46 ` [PATCH v4 16/37] mtd: st_spi_fsm: Provide the erase one sector sequence Lee Jones
2014-01-08 13:47 ` [PATCH v4 17/37] mtd: st_spi_fsm: Provide the sequence for enabling 32bit addressing mode Lee Jones
2014-01-08 13:47 ` [PATCH v4 18/37] mtd: st_spi_fsm: Prepare read/write sequences according to configuration Lee Jones
2014-01-08 13:47 ` [PATCH v4 19/37] mtd: st_spi_fsm: Add a check to if the chip can handle an SoC reset Lee Jones
2014-01-08 13:47 ` [PATCH v4 20/37] mtd: st_spi_fsm: Provide a method to put the chip into 32bit addressing mode Lee Jones
2014-01-08 13:47 ` [PATCH v4 21/37] mtd: st_spi_fsm: Update the flash Volatile Configuration Register Lee Jones
2014-01-08 13:47 ` [PATCH v4 22/37] mtd: st_spi_fsm: Provide the default read/write configurations Lee Jones
2014-01-08 13:47 ` [PATCH v4 23/37] mtd: st_spi_fsm: Supply the N25Qxxx specific read configurations Lee Jones
2014-01-08 13:47 ` [PATCH v4 24/37] mtd: st_spi_fsm: Supply the N25Qxxx chip specific configuration call-back Lee Jones
2014-01-08 13:47 ` [PATCH v4 25/37] mtd: st_spi_fsm: Prepare default sequences for read/write/erase Lee Jones
2014-01-08 13:47 ` [PATCH v4 26/37] mtd: st_spi_fsm: Add the ability to read from a Serial Flash device Lee Jones
2014-01-08 13:47 ` [PATCH v4 27/37] mtd: st_spi_fsm: Write to Flash via the FSM FIFO Lee Jones
2014-01-08 13:47 ` [PATCH v4 28/37] mtd: st_spi_fsm: Supply a busy wait for post-write status Lee Jones
2014-01-08 13:47 ` [PATCH v4 29/37] mtd: st_spi_fsm: Add the ability to write to a Serial Flash device Lee Jones
2014-01-08 13:47 ` [PATCH v4 30/37] mtd: st_spi_fsm: Erase partly or as a whole " Lee Jones
2014-01-08 13:47 ` [PATCH v4 31/37] mtd: st_spi_fsm: Add the ability to read the FSM's status Lee Jones
2014-01-08 13:47 ` [PATCH v4 32/37] mtd: st_spi_fsm: Add the ability to write to FSM's status register Lee Jones
2014-01-08 13:47 ` [PATCH v4 33/37] mtd: st_spi_fsm: Supply the MX25xxx chip specific configuration call-back Lee Jones
2014-01-08 13:47 ` [PATCH v4 34/37] mtd: st_spi_fsm: Supply the S25FLxxx " Lee Jones
2014-01-08 13:47 ` [PATCH v4 35/37] mtd: st_spi_fsm: Supply the W25Qxxx " Lee Jones
2014-01-08 13:47 ` [PATCH v4 36/37] mtd: st_spi_fsm: Move runtime configurable msg sequences into device's struct Lee Jones
2014-01-08 13:47 ` [PATCH v4 37/37] ARM: STi: Add support for the FSM Serial Flash Controller Lee Jones
2014-01-08 14:33 ` [PATCH v4 00/36] mtd: st_spi_fsm: Add new driver Lee Jones
2014-01-22 12:50 ` Lee Jones
2014-01-23 1:46 ` Brian Norris
2014-02-24 11:39 ` Lee Jones
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1389188840-14306-13-git-send-email-lee.jones@linaro.org \
--to=lee.jones@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).