From: zhangfei.gao@linaro.org (Zhangfei Gao)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2] mmc: dw_mmc: fix dw_mci_get_cd
Date: Thu, 16 Jan 2014 10:31:42 +0800 [thread overview]
Message-ID: <1389839502-13046-1-git-send-email-zhangfei.gao@linaro.org> (raw)
Introduced from commit bf626e5550f24aec24975a0e85ad8e572ca76a6b
CDETECT is ignored since negated return value of mmc_gpio_get_cd(mmc)
can not be checked by IS_ERR_VALUE.
Add spin_lock_bh(&host->lock) for atomic accessing DW_MMC_CARD_PRESENT,
otherwise sd detect may occasionally fail.
Signed-off-by: Zhangfei Gao <zhangfei.gao@linaro.org>
Reported-by: Kevin Hilman <khilman@linaro.org>
Reviewed-by: Sachin Kamat <sachin.kamat@linaro.org>
Tested-by: Sachin Kamat <sachin.kamat@linaro.org>
---
.../devicetree/bindings/mmc/synopsys-dw-mshc.txt | 2 ++
drivers/mmc/host/dw_mmc.c | 12 +++++++++---
2 files changed, 11 insertions(+), 3 deletions(-)
diff --git a/Documentation/devicetree/bindings/mmc/synopsys-dw-mshc.txt b/Documentation/devicetree/bindings/mmc/synopsys-dw-mshc.txt
index 8f3f13315358..18b0819bafe0 100644
--- a/Documentation/devicetree/bindings/mmc/synopsys-dw-mshc.txt
+++ b/Documentation/devicetree/bindings/mmc/synopsys-dw-mshc.txt
@@ -73,6 +73,8 @@ Optional properties:
* caps2-mmc-hs200-1_2v: Supports mmc HS200 SDR 1.2V mode
+* caps2-mmc-cd-active-high: cd pin is high when card present
+
* broken-cd: as documented in mmc core bindings.
* vmmc-supply: The phandle to the regulator to use for vmmc. If this is
diff --git a/drivers/mmc/host/dw_mmc.c b/drivers/mmc/host/dw_mmc.c
index a776f24f4311..ad65b895d34c 100644
--- a/drivers/mmc/host/dw_mmc.c
+++ b/drivers/mmc/host/dw_mmc.c
@@ -1033,7 +1033,8 @@ static int dw_mci_get_cd(struct mmc_host *mmc)
int present;
struct dw_mci_slot *slot = mmc_priv(mmc);
struct dw_mci_board *brd = slot->host->pdata;
- int gpio_cd = !mmc_gpio_get_cd(mmc);
+ struct dw_mci *host = slot->host;
+ int gpio_cd = mmc_gpio_get_cd(mmc);
/* Use platform get_cd function, else try onboard card detect */
if (brd->quirks & DW_MCI_QUIRK_BROKEN_CARD_DETECTION)
@@ -1041,11 +1042,12 @@ static int dw_mci_get_cd(struct mmc_host *mmc)
else if (brd->get_cd)
present = !brd->get_cd(slot->id);
else if (!IS_ERR_VALUE(gpio_cd))
- present = !!gpio_cd;
+ present = gpio_cd;
else
present = (mci_readl(slot->host, CDETECT) & (1 << slot->id))
== 0 ? 1 : 0;
+ spin_lock_bh(&host->lock);
if (present) {
set_bit(DW_MMC_CARD_PRESENT, &slot->flags);
dev_dbg(&mmc->class_dev, "card is present\n");
@@ -1053,6 +1055,7 @@ static int dw_mci_get_cd(struct mmc_host *mmc)
clear_bit(DW_MMC_CARD_PRESENT, &slot->flags);
dev_dbg(&mmc->class_dev, "card is not present\n");
}
+ spin_unlock_bh(&host->lock);
return present;
}
@@ -2081,7 +2084,7 @@ static int dw_mci_of_get_wp_gpio(struct device *dev, u8 slot)
return gpio;
}
-/* find the cd gpio for a given slot; or -1 if none specified */
+/* find the cd gpio for a given slot */
static void dw_mci_of_get_cd_gpio(struct device *dev, u8 slot,
struct mmc_host *mmc)
{
@@ -2411,6 +2414,9 @@ static struct dw_mci_board *dw_mci_parse_dt(struct dw_mci *host)
if (of_find_property(np, "caps2-mmc-hs200-1_2v", NULL))
pdata->caps2 |= MMC_CAP2_HS200_1_2V_SDR;
+ if (of_find_property(np, "caps2-mmc-cd-active-high", NULL))
+ pdata->caps2 |= MMC_CAP2_CD_ACTIVE_HIGH;
+
return pdata;
}
--
1.7.9.5
next reply other threads:[~2014-01-16 2:31 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-01-16 2:31 Zhangfei Gao [this message]
2014-01-16 10:50 ` [PATCH v2] mmc: dw_mmc: fix dw_mci_get_cd Arnd Bergmann
2014-01-16 12:34 ` zhangfei
2014-01-16 12:48 ` [PATCH] " Zhangfei Gao
2014-01-16 18:29 ` Kevin Hilman
2014-01-17 12:35 ` Seungwon Jeon
2014-01-17 14:25 ` Chris Ball
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1389839502-13046-1-git-send-email-zhangfei.gao@linaro.org \
--to=zhangfei.gao@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).