Linux-ARM-Kernel Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: lho@apm.com (Loc Ho)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v8 4/4] arm64: Add APM X-Gene SoC 15Gbps Multi-purpose PHY DTS entries
Date: Thu, 16 Jan 2014 09:09:58 -0700	[thread overview]
Message-ID: <1389888598-29690-5-git-send-email-lho@apm.com> (raw)
In-Reply-To: <1389888598-29690-4-git-send-email-lho@apm.com>

This patch adds the DTS entries for the APM X-Gene SoC 15Gbps Multi-purpose
PHY driver. The PHY for SATA controller 2 and 3 are enabled by default.

Signed-off-by: Loc Ho <lho@apm.com>
Signed-off-by: Tuan Phan <tphan@apm.com>
Signed-off-by: Suman Tripathi <stripathi@apm.com>
---
 arch/arm64/boot/dts/apm-storm.dtsi |   75 ++++++++++++++++++++++++++++++++++++
 1 files changed, 75 insertions(+), 0 deletions(-)

diff --git a/arch/arm64/boot/dts/apm-storm.dtsi b/arch/arm64/boot/dts/apm-storm.dtsi
index 359d7b6..b1e9cc9 100644
--- a/arch/arm64/boot/dts/apm-storm.dtsi
+++ b/arch/arm64/boot/dts/apm-storm.dtsi
@@ -176,6 +176,51 @@
 				reg-names = "csr-reg";
 				clock-output-names = "eth8clk";
 			};
+
+			sataphy1clk: sataphy1clk at 1f21c000 {
+				compatible = "apm,xgene-device-clock";
+				#clock-cells = <1>;
+				clocks = <&socplldiv2 0>;
+				clock-names = "socplldiv2";
+				reg = <0x0 0x1f21c000 0x0 0x1000>;
+				reg-names = "csr-reg";
+				clock-output-names = "sataphy1clk";
+				status = "disabled";
+				csr-offset = <0x4>;
+				csr-mask = <0x00>;
+				enable-offset = <0x0>;
+				enable-mask = <0x06>;
+			};
+
+			sataphy2clk: sataphy1clk at 1f22c000 {
+				compatible = "apm,xgene-device-clock";
+				#clock-cells = <1>;
+				clocks = <&socplldiv2 0>;
+				clock-names = "socplldiv2";
+				reg = <0x0 0x1f22c000 0x0 0x1000>;
+				reg-names = "csr-reg";
+				clock-output-names = "sataphy2clk";
+				status = "ok";
+				csr-offset = <0x4>;
+				csr-mask = <0x3a>;
+				enable-offset = <0x0>;
+				enable-mask = <0x06>;
+			};
+
+			sataphy3clk: sataphy1clk at 1f23c000 {
+				compatible = "apm,xgene-device-clock";
+				#clock-cells = <1>;
+				clocks = <&socplldiv2 0>;
+				clock-names = "socplldiv2";
+				reg = <0x0 0x1f23c000 0x0 0x1000>;
+				reg-names = "csr-reg";
+				clock-output-names = "sataphy3clk";
+				status = "ok";
+				csr-offset = <0x4>;
+				csr-mask = <0x3a>;
+				enable-offset = <0x0>;
+				enable-mask = <0x06>;
+			};
 		};
 
 		serial0: serial at 1c020000 {
@@ -193,5 +238,35 @@
 			reg = <0x0 0x17000014 0x0 0x100>;
 			mask = <0x1>;
 		};
+
+		phy1: phy at 1f21a000 {
+			compatible = "apm,xgene-phy";
+			reg = <0x0 0x1f21a000 0x0 0x100>;
+			#phy-cells = <1>;
+			clocks = <&sataphy1clk 0>;
+			status = "disabled";
+			apm,tx-boost-gain = <30 30 30 30 30 30>;
+			apm,tx-eye-tuning = <2 10 10 2 10 10>;
+		};
+
+		phy2: phy at 1f22a000 {
+			compatible = "apm,xgene-phy";
+			reg = <0x0 0x1f22a000 0x0 0x100>;
+			#phy-cells = <1>;
+			clocks = <&sataphy2clk 0>;
+			status = "ok";
+			apm,tx-boost-gain = <30 30 30 30 30 30>;
+			apm,tx-eye-tuning = <1 10 10 2 10 10>;
+		};
+
+		phy3: phy at 1f23a000 {
+			compatible = "apm,xgene-phy";
+			reg = <0x0 0x1f23a000 0x0 0x100>;
+			#phy-cells = <1>;
+			clocks = <&sataphy3clk 0>;
+			status = "ok";
+			apm,tx-boost-gain = <31 31 31 31 31 31>;
+			apm,tx-eye-tuning = <2 10 10 2 10 10>;
+		};
 	};
 };
-- 
1.5.5

      reply	other threads:[~2014-01-16 16:09 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-01-16 16:09 No subject Loc Ho
2014-01-16 16:09 ` [PATCH v8 1/4] PHY: Add function set_speed to generic PHY framework Loc Ho
2014-01-16 16:09   ` [PATCH v8 2/4] Documentation: Add APM X-Gene SoC 15Gbps Multi-purpose PHY driver binding documentation Loc Ho
2014-01-16 16:09     ` [PATCH v8 3/4] PHY: add APM X-Gene SoC 15Gbps Multi-purpose PHY driver Loc Ho
2014-01-16 16:09       ` Loc Ho [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1389888598-29690-5-git-send-email-lho@apm.com \
    --to=lho@apm.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox