* [PATCH] tty/serial: atmel_serial: remove dev_dbg in atmel_set_termios
@ 2014-01-22 9:38 Nicolas Ferre
0 siblings, 0 replies; only message in thread
From: Nicolas Ferre @ 2014-01-22 9:38 UTC (permalink / raw)
To: linux-arm-kernel
This fixes a driver bug which stopped the whole system (in case
of serial console).
This log message is not useful anyway as this information is
printed elsewhere.
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
---
drivers/tty/serial/atmel_serial.c | 3 ---
1 file changed, 3 deletions(-)
diff --git a/drivers/tty/serial/atmel_serial.c b/drivers/tty/serial/atmel_serial.c
index a49f10d269b2..3d7206fc532f 100644
--- a/drivers/tty/serial/atmel_serial.c
+++ b/drivers/tty/serial/atmel_serial.c
@@ -1853,13 +1853,10 @@ static void atmel_set_termios(struct uart_port *port, struct ktermios *termios,
mode &= ~ATMEL_US_USMODE;
if (atmel_port->rs485.flags & SER_RS485_ENABLED) {
- dev_dbg(port->dev, "Setting UART to RS485\n");
if ((atmel_port->rs485.delay_rts_after_send) > 0)
UART_PUT_TTGR(port,
atmel_port->rs485.delay_rts_after_send);
mode |= ATMEL_US_USMODE_RS485;
- } else {
- dev_dbg(port->dev, "Setting UART to RS232\n");
}
/* set the parity, stop bits and data size */
--
1.8.2.2
^ permalink raw reply related [flat|nested] only message in thread
only message in thread, other threads:[~2014-01-22 9:38 UTC | newest]
Thread overview: (only message) (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2014-01-22 9:38 [PATCH] tty/serial: atmel_serial: remove dev_dbg in atmel_set_termios Nicolas Ferre
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).