From mboxrd@z Thu Jan  1 00:00:00 1970
From: hdegoede@redhat.com (Hans de Goede)
Date: Wed, 22 Jan 2014 20:04:35 +0100
Subject: [PATCH v5 00/14] ahci: library-ise ahci_platform,
 add sunxi driver and cleanup imx driver
Message-ID: <1390417489-5354-1-git-send-email-hdegoede@redhat.com>
To: linux-arm-kernel@lists.infradead.org
List-Id: linux-arm-kernel.lists.infradead.org

Hi all,

Here is v4 of my patchset for adding ahci-sunxi support. It has grown quite
a bit since I've been going for a more generic approach this time and I've
also cleaned up the ahci-imx driver to use the same generic approach.

History:

v1, by Olliver Schinagl:
This was using the approach of having a platform device which probe method
creates a new child platform device which gets driven by ahci_platform.c,
as done by ahci_imx.c .

v2, by Hans de Goede:
Stand-alone platform driver based on Olliver's work

v3, by Hans de Goede:
patch-series, with 4 different parts
a) Make ahci_platform.c more generic, handle more then 1 clk, target pwr
   regulator
b) New ahci-sunxi code only populating ahci_platform_data, passed to
   ahci_platform.c to of_device_id matching.
c) Refactor ahci-imx code to work the same as the new ahci-sunxi code, this
   is the reason why v3 is an RFC, I'm waiting for the wandboard I ordered to
   arrive so that I can actually test this.
d) dts bindings for the sunxi ahci parts

v4, by Hans de Goede:
patch-series, with 5 different parts:
a) Make ahci_platform.c more generic, handle more then 1 clk, target pwr
   regulator
b) Turn parts of ahci_platform.c into a library for use by other drivers
c) New ahci-sunxi driver using the ahci_platform.c library functionality
d) Refactor ahci-imx code to work the same as the new ahci-sunxi code
e) dts bindings for the sunxi ahci parts

v5:
v4 + the following changes:
1) fsl,imx6q driver is now tested
2) fixed suspend / resume on fsl,imx6q
3) Modifed devicetree node naming to match dt spec
4) Reworked the busy waiting code in the sunxi-phy handling as suggested by
   Russell King

Parts a-d are intended for merging through the ata tree, the dts bindings
will be merged to Maxime Ripard's sunxi-dts tree.

Regards,

Hans