From: lee.jones@linaro.org (Lee Jones)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH RESEND v4 11/37] mtd: st_spi_fsm: Search for preferred FSM message sequence configurations
Date: Thu, 23 Jan 2014 10:30:59 +0000 [thread overview]
Message-ID: <1390473085-24626-12-git-send-email-lee.jones@linaro.org> (raw)
In-Reply-To: <1390473085-24626-1-git-send-email-lee.jones@linaro.org>
Here we provide a means to traverse though all supplied FSM message
sequence configurations and pick one based on our chip's capabilities.
The first one we match will be the preferred one, as they are
presented in order of preference.
Signed-off-by: Lee Jones <lee.jones@linaro.org>
---
drivers/mtd/devices/st_spi_fsm.c | 27 +++++++++++++++++++++++++++
1 file changed, 27 insertions(+)
diff --git a/drivers/mtd/devices/st_spi_fsm.c b/drivers/mtd/devices/st_spi_fsm.c
index a70e916..efd8fdb 100644
--- a/drivers/mtd/devices/st_spi_fsm.c
+++ b/drivers/mtd/devices/st_spi_fsm.c
@@ -258,6 +258,18 @@ struct stfsm_seq {
uint32_t seq_cfg;
} __packed __aligned(4);
+/* Parameters to configure a READ or WRITE FSM sequence */
+struct seq_rw_config {
+ uint32_t flags; /* flags to support config */
+ uint8_t cmd; /* FLASH command */
+ int write; /* Write Sequence */
+ uint8_t addr_pads; /* No. of addr pads (MODE & DUMMY) */
+ uint8_t data_pads; /* No. of data pads */
+ uint8_t mode_data; /* MODE data */
+ uint8_t mode_cycles; /* No. of MODE cycles */
+ uint8_t dummy_cycles; /* No. of DUMMY cycles */
+};
+
/* SPI Flash Device Table */
struct flash_info {
char *name;
@@ -493,6 +505,21 @@ static void stfsm_read_fifo(struct stfsm *fsm, uint32_t *buf,
}
}
+/* Search for preferred configuration based on available flags */
+static struct seq_rw_config *
+stfsm_search_seq_rw_configs(struct stfsm *fsm,
+ struct seq_rw_config cfgs[])
+{
+ struct seq_rw_config *config;
+ int flags = fsm->info->flags;
+
+ for (config = cfgs; config->cmd != 0; config++)
+ if ((config->flags & flags) == config->flags)
+ return config;
+
+ return NULL;
+}
+
static void stfsm_read_jedec(struct stfsm *fsm, uint8_t *const jedec)
{
const struct stfsm_seq *seq = &stfsm_seq_read_jedec;
--
1.8.3.2
next prev parent reply other threads:[~2014-01-23 10:30 UTC|newest]
Thread overview: 42+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-01-23 10:30 [PATCH RESEND v4 00/37] mtd: st_spi_fsm: Add new driver Lee Jones
2014-01-23 10:30 ` [PATCH RESEND v4 01/37] mtd: st_spi_fsm: Allocate resources and register with MTD framework Lee Jones
2014-01-23 14:16 ` Ludovic Barre
2014-01-23 15:55 ` Lee Jones
2014-01-23 10:30 ` [PATCH RESEND v4 02/37] mtd: st_spi_fsm: Supply all register address and bit logic defines Lee Jones
2014-01-23 10:30 ` [PATCH RESEND v4 03/37] mtd: st_spi_fsm: Initialise and configure the FSM for normal working conditions Lee Jones
2014-01-23 10:30 ` [PATCH RESEND v4 04/37] mtd: st_spi_fsm: Supply framework for device requests Lee Jones
2014-01-23 10:30 ` [PATCH RESEND v4 05/37] mtd: st_spi_fsm: Supply a method to read from the FSM's FIFO Lee Jones
2014-01-23 10:30 ` [PATCH RESEND v4 06/37] mtd: st_spi_fsm: Supply defines for the possible flash command opcodes Lee Jones
2014-01-23 10:30 ` [PATCH RESEND v4 07/37] mtd: st_spi_fsm: Add support for JEDEC ID extraction Lee Jones
2014-01-23 10:30 ` [PATCH RESEND v4 08/37] mtd: devices: Provide header for shared OPCODEs and SFDP commands Lee Jones
2014-01-23 10:30 ` [PATCH RESEND v4 09/37] mtd: st_spi_fsm: Provide device look-up table Lee Jones
2014-01-23 10:30 ` [PATCH RESEND v4 10/37] mtd: st_spi_fsm: Dynamically setup flash device based on JEDEC ID Lee Jones
2014-01-23 10:30 ` Lee Jones [this message]
2014-01-23 10:31 ` [PATCH RESEND v4 12/37] mtd: st_spi_fsm: Fetch platform specific configurations Lee Jones
2014-01-23 10:31 ` [PATCH RESEND v4 13/37] mtd: st_spi_fsm: Prepare the read/write FSM message sequence(s) Lee Jones
2014-01-23 10:31 ` [PATCH RESEND v4 14/37] mtd: st_spi_fsm: Add device-tree binding documentation Lee Jones
2014-01-23 10:31 ` [PATCH RESEND v4 15/37] mtd: st_spi_fsm: Fetch boot-device from mode pins Lee Jones
2014-01-23 10:31 ` [PATCH RESEND v4 16/37] mtd: st_spi_fsm: Provide the erase one sector sequence Lee Jones
2014-01-23 10:31 ` [PATCH RESEND v4 17/37] mtd: st_spi_fsm: Provide the sequence for enabling 32bit addressing mode Lee Jones
2014-01-23 10:31 ` [PATCH RESEND v4 18/37] mtd: st_spi_fsm: Prepare read/write sequences according to configuration Lee Jones
2014-01-23 10:31 ` [PATCH RESEND v4 19/37] mtd: st_spi_fsm: Add a check to if the chip can handle an SoC reset Lee Jones
2014-01-23 10:31 ` [PATCH RESEND v4 20/37] mtd: st_spi_fsm: Provide a method to put the chip into 32bit addressing mode Lee Jones
2014-01-23 10:31 ` [PATCH RESEND v4 21/37] mtd: st_spi_fsm: Update the flash Volatile Configuration Register Lee Jones
2014-01-23 10:31 ` [PATCH RESEND v4 22/37] mtd: st_spi_fsm: Provide the default read/write configurations Lee Jones
2014-01-23 10:31 ` [PATCH RESEND v4 23/37] mtd: st_spi_fsm: Supply the N25Qxxx specific read configurations Lee Jones
2014-01-23 10:31 ` [PATCH RESEND v4 24/37] mtd: st_spi_fsm: Supply the N25Qxxx chip specific configuration call-back Lee Jones
2014-01-23 10:31 ` [PATCH RESEND v4 25/37] mtd: st_spi_fsm: Prepare default sequences for read/write/erase Lee Jones
2014-01-23 10:31 ` [PATCH RESEND v4 26/37] mtd: st_spi_fsm: Add the ability to read from a Serial Flash device Lee Jones
2014-01-23 10:31 ` [PATCH RESEND v4 27/37] mtd: st_spi_fsm: Write to Flash via the FSM FIFO Lee Jones
2014-01-23 10:31 ` [PATCH RESEND v4 28/37] mtd: st_spi_fsm: Supply a busy wait for post-write status Lee Jones
2014-01-23 10:31 ` [PATCH RESEND v4 29/37] mtd: st_spi_fsm: Add the ability to write to a Serial Flash device Lee Jones
2014-01-23 10:31 ` [PATCH RESEND v4 30/37] mtd: st_spi_fsm: Erase partly or as a whole " Lee Jones
2014-01-23 10:31 ` [PATCH RESEND v4 31/37] mtd: st_spi_fsm: Add the ability to read the FSM's status Lee Jones
2014-01-23 10:31 ` [PATCH RESEND v4 32/37] mtd: st_spi_fsm: Add the ability to write to FSM's status register Lee Jones
2014-01-23 10:31 ` [PATCH RESEND v4 33/37] mtd: st_spi_fsm: Supply the MX25xxx chip specific configuration call-back Lee Jones
2014-01-23 10:31 ` [PATCH RESEND v4 34/37] mtd: st_spi_fsm: Supply the S25FLxxx " Lee Jones
2014-01-23 10:31 ` [PATCH RESEND v4 35/37] mtd: st_spi_fsm: Supply the W25Qxxx " Lee Jones
2014-01-23 10:31 ` [PATCH RESEND v4 36/37] mtd: st_spi_fsm: Move runtime configurable msg sequences into device's struct Lee Jones
2014-01-23 10:31 ` [PATCH RESEND v4 37/37] ARM: STi: Add support for the FSM Serial Flash Controller Lee Jones
2014-02-11 15:00 ` [PATCH RESEND v4 00/37] mtd: st_spi_fsm: Add new driver Angus Clark
2014-02-14 10:46 ` Lee Jones
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1390473085-24626-12-git-send-email-lee.jones@linaro.org \
--to=lee.jones@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).