From: lee.jones@linaro.org (Lee Jones)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH RESEND v4 14/37] mtd: st_spi_fsm: Add device-tree binding documentation
Date: Thu, 23 Jan 2014 10:31:02 +0000 [thread overview]
Message-ID: <1390473085-24626-15-git-send-email-lee.jones@linaro.org> (raw)
In-Reply-To: <1390473085-24626-1-git-send-email-lee.jones@linaro.org>
Cc: devicetree at vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
---
Documentation/devicetree/bindings/mtd/st-fsm.txt | 26 ++++++++++++++++++++++++
1 file changed, 26 insertions(+)
create mode 100644 Documentation/devicetree/bindings/mtd/st-fsm.txt
diff --git a/Documentation/devicetree/bindings/mtd/st-fsm.txt b/Documentation/devicetree/bindings/mtd/st-fsm.txt
new file mode 100644
index 0000000..c248939
--- /dev/null
+++ b/Documentation/devicetree/bindings/mtd/st-fsm.txt
@@ -0,0 +1,26 @@
+* ST-Microelectronics SPI FSM Serial (NOR) Flash Controller
+
+Required properties:
+ - compatible : Should be "st,spi-fsm"
+ - reg : Contains register's location and length.
+ - reg-names : Should contain the reg names "spi-fsm"
+ - interrupts : The interrupt number
+ - pinctrl-0 : Standard Pinctrl phandle (see: pinctrl/pinctrl-bindings.txt)
+
+Optional properties:
+ - st,syscfg : Phandle to boot-device system configuration registers
+ - st,boot-device-reg : Address of the aforementioned boot-device register(s)
+ - st,boot-device-spi : Expected boot-device value if booted via this device
+
+Example:
+ spifsm: spifsm at fe902000{
+ compatible = "st,spi-fsm";
+ reg = <0xfe902000 0x1000>;
+ reg-names = "spi-fsm";
+ pinctrl-0 = <&pinctrl_fsm>;
+ st,syscfg = <&syscfg_rear>;
+ st,boot-device-reg = <0x958>;
+ st,boot-device-spi = <0x1a>;
+ status = "okay";
+ };
+
--
1.8.3.2
next prev parent reply other threads:[~2014-01-23 10:31 UTC|newest]
Thread overview: 42+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-01-23 10:30 [PATCH RESEND v4 00/37] mtd: st_spi_fsm: Add new driver Lee Jones
2014-01-23 10:30 ` [PATCH RESEND v4 01/37] mtd: st_spi_fsm: Allocate resources and register with MTD framework Lee Jones
2014-01-23 14:16 ` Ludovic Barre
2014-01-23 15:55 ` Lee Jones
2014-01-23 10:30 ` [PATCH RESEND v4 02/37] mtd: st_spi_fsm: Supply all register address and bit logic defines Lee Jones
2014-01-23 10:30 ` [PATCH RESEND v4 03/37] mtd: st_spi_fsm: Initialise and configure the FSM for normal working conditions Lee Jones
2014-01-23 10:30 ` [PATCH RESEND v4 04/37] mtd: st_spi_fsm: Supply framework for device requests Lee Jones
2014-01-23 10:30 ` [PATCH RESEND v4 05/37] mtd: st_spi_fsm: Supply a method to read from the FSM's FIFO Lee Jones
2014-01-23 10:30 ` [PATCH RESEND v4 06/37] mtd: st_spi_fsm: Supply defines for the possible flash command opcodes Lee Jones
2014-01-23 10:30 ` [PATCH RESEND v4 07/37] mtd: st_spi_fsm: Add support for JEDEC ID extraction Lee Jones
2014-01-23 10:30 ` [PATCH RESEND v4 08/37] mtd: devices: Provide header for shared OPCODEs and SFDP commands Lee Jones
2014-01-23 10:30 ` [PATCH RESEND v4 09/37] mtd: st_spi_fsm: Provide device look-up table Lee Jones
2014-01-23 10:30 ` [PATCH RESEND v4 10/37] mtd: st_spi_fsm: Dynamically setup flash device based on JEDEC ID Lee Jones
2014-01-23 10:30 ` [PATCH RESEND v4 11/37] mtd: st_spi_fsm: Search for preferred FSM message sequence configurations Lee Jones
2014-01-23 10:31 ` [PATCH RESEND v4 12/37] mtd: st_spi_fsm: Fetch platform specific configurations Lee Jones
2014-01-23 10:31 ` [PATCH RESEND v4 13/37] mtd: st_spi_fsm: Prepare the read/write FSM message sequence(s) Lee Jones
2014-01-23 10:31 ` Lee Jones [this message]
2014-01-23 10:31 ` [PATCH RESEND v4 15/37] mtd: st_spi_fsm: Fetch boot-device from mode pins Lee Jones
2014-01-23 10:31 ` [PATCH RESEND v4 16/37] mtd: st_spi_fsm: Provide the erase one sector sequence Lee Jones
2014-01-23 10:31 ` [PATCH RESEND v4 17/37] mtd: st_spi_fsm: Provide the sequence for enabling 32bit addressing mode Lee Jones
2014-01-23 10:31 ` [PATCH RESEND v4 18/37] mtd: st_spi_fsm: Prepare read/write sequences according to configuration Lee Jones
2014-01-23 10:31 ` [PATCH RESEND v4 19/37] mtd: st_spi_fsm: Add a check to if the chip can handle an SoC reset Lee Jones
2014-01-23 10:31 ` [PATCH RESEND v4 20/37] mtd: st_spi_fsm: Provide a method to put the chip into 32bit addressing mode Lee Jones
2014-01-23 10:31 ` [PATCH RESEND v4 21/37] mtd: st_spi_fsm: Update the flash Volatile Configuration Register Lee Jones
2014-01-23 10:31 ` [PATCH RESEND v4 22/37] mtd: st_spi_fsm: Provide the default read/write configurations Lee Jones
2014-01-23 10:31 ` [PATCH RESEND v4 23/37] mtd: st_spi_fsm: Supply the N25Qxxx specific read configurations Lee Jones
2014-01-23 10:31 ` [PATCH RESEND v4 24/37] mtd: st_spi_fsm: Supply the N25Qxxx chip specific configuration call-back Lee Jones
2014-01-23 10:31 ` [PATCH RESEND v4 25/37] mtd: st_spi_fsm: Prepare default sequences for read/write/erase Lee Jones
2014-01-23 10:31 ` [PATCH RESEND v4 26/37] mtd: st_spi_fsm: Add the ability to read from a Serial Flash device Lee Jones
2014-01-23 10:31 ` [PATCH RESEND v4 27/37] mtd: st_spi_fsm: Write to Flash via the FSM FIFO Lee Jones
2014-01-23 10:31 ` [PATCH RESEND v4 28/37] mtd: st_spi_fsm: Supply a busy wait for post-write status Lee Jones
2014-01-23 10:31 ` [PATCH RESEND v4 29/37] mtd: st_spi_fsm: Add the ability to write to a Serial Flash device Lee Jones
2014-01-23 10:31 ` [PATCH RESEND v4 30/37] mtd: st_spi_fsm: Erase partly or as a whole " Lee Jones
2014-01-23 10:31 ` [PATCH RESEND v4 31/37] mtd: st_spi_fsm: Add the ability to read the FSM's status Lee Jones
2014-01-23 10:31 ` [PATCH RESEND v4 32/37] mtd: st_spi_fsm: Add the ability to write to FSM's status register Lee Jones
2014-01-23 10:31 ` [PATCH RESEND v4 33/37] mtd: st_spi_fsm: Supply the MX25xxx chip specific configuration call-back Lee Jones
2014-01-23 10:31 ` [PATCH RESEND v4 34/37] mtd: st_spi_fsm: Supply the S25FLxxx " Lee Jones
2014-01-23 10:31 ` [PATCH RESEND v4 35/37] mtd: st_spi_fsm: Supply the W25Qxxx " Lee Jones
2014-01-23 10:31 ` [PATCH RESEND v4 36/37] mtd: st_spi_fsm: Move runtime configurable msg sequences into device's struct Lee Jones
2014-01-23 10:31 ` [PATCH RESEND v4 37/37] ARM: STi: Add support for the FSM Serial Flash Controller Lee Jones
2014-02-11 15:00 ` [PATCH RESEND v4 00/37] mtd: st_spi_fsm: Add new driver Angus Clark
2014-02-14 10:46 ` Lee Jones
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1390473085-24626-15-git-send-email-lee.jones@linaro.org \
--to=lee.jones@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).