From: tinamdar@apm.com (Tanmay Inamdar)
To: linux-arm-kernel@lists.infradead.org
Subject: [RFC PATCH V3 3/4] dt-bindings: pci: xgene pcie device tree bindings
Date: Fri, 24 Jan 2014 13:32:47 -0800 [thread overview]
Message-ID: <1390599168-13150-4-git-send-email-tinamdar@apm.com> (raw)
In-Reply-To: <1390599168-13150-1-git-send-email-tinamdar@apm.com>
This patch adds the bindings for X-Gene PCIe driver. The driver resides
under 'drivers/pci/host/pci-xgene.c' file.
Signed-off-by: Tanmay Inamdar <tinamdar@apm.com>
---
.../devicetree/bindings/pci/xgene-pci.txt | 52 ++++++++++++++++++++
1 file changed, 52 insertions(+)
create mode 100644 Documentation/devicetree/bindings/pci/xgene-pci.txt
diff --git a/Documentation/devicetree/bindings/pci/xgene-pci.txt b/Documentation/devicetree/bindings/pci/xgene-pci.txt
new file mode 100644
index 0000000..60e4a54
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/xgene-pci.txt
@@ -0,0 +1,52 @@
+* AppliedMicro X-Gene PCIe interface
+
+Required properties:
+- device_type: set to "pci"
+- compatible: should contain "xgene,pcie" to identify the core.
+- reg: A list of physical base address and length for each set of controller
+ registers. Must contain an entry for each entry in the reg-names
+ property.
+- reg-names: Must include the following entries:
+ "csr": controller configuration registers.
+ "cfg": pcie configuration space registers.
+- #address-cells: set to <3>
+- #size-cells: set to <2>
+- ranges: ranges for the outbound memory, I/O regions.
+- dma-ranges: ranges for the inbound memory regions.
+- #interrupt-cells: set to <1>
+- interrupt-map-mask and interrupt-map: standard PCI properties
+ to define the mapping of the PCIe interface to interrupt
+ numbers.
+- clocks: from common clock binding: handle to pci clock.
+
+Optional properties:
+- status: Either "ok" or "disabled".
+
+Example:
+
+SoC specific DT Entry:
+ pcie0: pcie at 1f2b0000 {
+ status = "disabled";
+ device_type = "pci";
+ compatible = "apm,xgene-pcie";
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ reg = < 0x00 0x1f2b0000 0x0 0x00010000 /* Controller registers */
+ 0xe0 0xd0000000 0x0 0x00200000>; /* PCI config space */
+ reg-names = "csr", "cfg";
+ ranges = <0x01000000 0x00 0x00000000 0xe0 0x00000000 0x00 0x00010000 /* io */
+ 0x02000000 0x00 0x10000000 0xe0 0x10000000 0x00 0x80000000>; /* mem */
+ dma-ranges = <0x42000000 0x40 0x00000000 0x40 0x00000000 0x40 0x00000000>;
+ interrupt-map-mask = <0x0 0x0 0x0 0x7>;
+ interrupt-map = <0x0 0x0 0x0 0x1 &gic 0x0 0xc2 0x1
+ 0x0 0x0 0x0 0x2 &gic 0x0 0xc3 0x1
+ 0x0 0x0 0x0 0x3 &gic 0x0 0xc4 0x1
+ 0x0 0x0 0x0 0x4 &gic 0x0 0xc5 0x1>;
+ clocks = <&pcie0clk 0>;
+ };
+
+Board specific DT Entry:
+ &pcie0 {
+ status = "ok";
+ };
--
1.7.9.5
next prev parent reply other threads:[~2014-01-24 21:32 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-01-24 21:32 [RFC PATCH V3 0/4] APM X-Gene PCIe controller Tanmay Inamdar
2014-01-24 21:32 ` [RFC PATCH V3 1/4] pci: APM X-Gene PCIe controller driver Tanmay Inamdar
2014-01-30 14:16 ` Arnd Bergmann
2014-02-03 19:42 ` Tanmay Inamdar
2014-02-03 20:12 ` Arnd Bergmann
2014-02-03 20:14 ` Tanmay Inamdar
2014-02-03 22:15 ` Jason Gunthorpe
2014-02-04 19:22 ` Arnd Bergmann
2014-01-24 21:32 ` [RFC PATCH V3 2/4] arm64: dts: APM X-Gene PCIe device tree nodes Tanmay Inamdar
2014-01-30 14:09 ` Arnd Bergmann
2014-01-24 21:32 ` Tanmay Inamdar [this message]
2014-01-24 21:32 ` [RFC PATCH V3 4/4] MAINTAINERS: entry for APM X-Gene PCIe host driver Tanmay Inamdar
2014-01-25 16:09 ` [RFC PATCH V3 0/4] APM X-Gene PCIe controller Dann Frazier
2014-01-27 22:58 ` Tanmay Inamdar
2014-01-30 0:18 ` Bjorn Helgaas
2014-01-30 0:40 ` Tanmay Inamdar
2014-01-30 14:21 ` Arnd Bergmann
2014-01-30 18:06 ` Bjorn Helgaas
2014-01-30 14:17 ` Arnd Bergmann
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1390599168-13150-4-git-send-email-tinamdar@apm.com \
--to=tinamdar@apm.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).