From: julien.grall@linaro.org (Julien Grall)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2] arm/xen: Initialize event channels earlier
Date: Tue, 28 Jan 2014 18:54:23 +0000 [thread overview]
Message-ID: <1390935264-23155-1-git-send-email-julien.grall@linaro.org> (raw)
Event channels driver needs to be initialized very early. Until now, Xen
initialization was done after all CPUs was bring up.
We can safely move the initialization to an early initcall.
Also use a cpu notifier to:
- Register the VCPU when the CPU is prepared
- Enable event channel IRQ when the CPU is running
Signed-off-by: Julien Grall <julien.grall@linaro.org>
---
Changes in v2:
- Check earlier if the event IRQ is valid
- We can safely register the VCPU when the cpu is booting
---
arch/arm/xen/enlighten.c | 71 ++++++++++++++++++++++++++++------------------
1 file changed, 44 insertions(+), 27 deletions(-)
diff --git a/arch/arm/xen/enlighten.c b/arch/arm/xen/enlighten.c
index 293eeea..b96723e 100644
--- a/arch/arm/xen/enlighten.c
+++ b/arch/arm/xen/enlighten.c
@@ -23,6 +23,7 @@
#include <linux/of_address.h>
#include <linux/cpuidle.h>
#include <linux/cpufreq.h>
+#include <linux/cpu.h>
#include <linux/mm.h>
@@ -154,7 +155,7 @@ int xen_unmap_domain_mfn_range(struct vm_area_struct *vma,
}
EXPORT_SYMBOL_GPL(xen_unmap_domain_mfn_range);
-static void __init xen_percpu_init(void *unused)
+static void xen_percpu_init(void)
{
struct vcpu_register_vcpu_info info;
struct vcpu_info *vcpup;
@@ -193,6 +194,31 @@ static void xen_power_off(void)
BUG();
}
+static int xen_cpu_notification(struct notifier_block *self,
+ unsigned long action,
+ void *hcpu)
+{
+ switch (action) {
+ case CPU_STARTING:
+ xen_percpu_init();
+ break;
+ default:
+ break;
+ }
+
+ return NOTIFY_OK;
+}
+
+static struct notifier_block xen_cpu_notifier = {
+ .notifier_call = xen_cpu_notification,
+};
+
+static irqreturn_t xen_arm_callback(int irq, void *arg)
+{
+ xen_hvm_evtchn_do_upcall();
+ return IRQ_HANDLED;
+}
+
/*
* see Documentation/devicetree/bindings/arm/xen.txt for the
* documentation of the Xen Device Tree format.
@@ -229,6 +255,10 @@ static int __init xen_guest_init(void)
xen_events_irq = irq_of_parse_and_map(node, 0);
pr_info("Xen %s support found, events_irq=%d gnttab_frame=%pa\n",
version, xen_events_irq, &grant_frames);
+
+ if (xen_events_irq < 0)
+ return -ENODEV;
+
xen_domain_type = XEN_HVM_DOMAIN;
xen_setup_features();
@@ -281,9 +311,21 @@ static int __init xen_guest_init(void)
disable_cpuidle();
disable_cpufreq();
+ xen_init_IRQ();
+
+ if (request_percpu_irq(xen_events_irq, xen_arm_callback,
+ "events", &xen_vcpu)) {
+ pr_err("Error request IRQ %d\n", xen_events_irq);
+ return -EINVAL;
+ }
+
+ xen_percpu_init();
+
+ register_cpu_notifier(&xen_cpu_notifier);
+
return 0;
}
-core_initcall(xen_guest_init);
+early_initcall(xen_guest_init);
static int __init xen_pm_init(void)
{
@@ -297,31 +339,6 @@ static int __init xen_pm_init(void)
}
late_initcall(xen_pm_init);
-static irqreturn_t xen_arm_callback(int irq, void *arg)
-{
- xen_hvm_evtchn_do_upcall();
- return IRQ_HANDLED;
-}
-
-static int __init xen_init_events(void)
-{
- if (!xen_domain() || xen_events_irq < 0)
- return -ENODEV;
-
- xen_init_IRQ();
-
- if (request_percpu_irq(xen_events_irq, xen_arm_callback,
- "events", &xen_vcpu)) {
- pr_err("Error requesting IRQ %d\n", xen_events_irq);
- return -EINVAL;
- }
-
- on_each_cpu(xen_percpu_init, NULL, 0);
-
- return 0;
-}
-postcore_initcall(xen_init_events);
-
/* In the hypervisor.S file. */
EXPORT_SYMBOL_GPL(HYPERVISOR_event_channel_op);
EXPORT_SYMBOL_GPL(HYPERVISOR_grant_table_op);
--
1.7.10.4
next reply other threads:[~2014-01-28 18:54 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-01-28 18:54 Julien Grall [this message]
2014-01-28 19:55 ` [PATCH v2] arm/xen: Initialize event channels earlier Stefano Stabellini
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1390935264-23155-1-git-send-email-julien.grall@linaro.org \
--to=julien.grall@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox