* [PATCH v3 0/6] efuse driver for Tegra
@ 2014-01-28 23:36 Peter De Schrijver
2014-01-28 23:36 ` [PATCH v3 1/6] ARM: tegra: export apb dma readl/writel Peter De Schrijver
` (7 more replies)
0 siblings, 8 replies; 21+ messages in thread
From: Peter De Schrijver @ 2014-01-28 23:36 UTC (permalink / raw)
To: linux-arm-kernel
This driver allows userspace to read the raw efuse data. Its userspace
interface is modelled after the sunxi_sid driver which provides similar
functionality for some Allwinner SoCs. It has been tested on
Tegra20 (ventana), Tegra30 (beaverboard) and Tegra114 (dalmore).
Changes since v1:
* Add documentation for sysfs interface
* Cleanup messages
Changes since v2:
* Incorporate early fuse code
* Remove module support
* Make driver always build when Tegra platform is selected
* Add DT binding document
* Address comments on v2
TODO:
* test on Tegra124 (venice2)
Peter De Schrijver (6):
ARM: tegra: export apb dma readl/writel
ARM: tegra: Add chipid, revision and fuse init
misc: fuse: Add efuse driver for Tegra
ARM: tegra: Add efuse bindings
misc: enable fuse drivers
ARM: tegra: remove fuse files from mach-tegra
Documentation/ABI/testing/sysfs-driver-tegra-fuse | 8 +
.../devicetree/bindings/fuse/fuse-tegra.txt | 32 +++
arch/arm/boot/dts/tegra114.dtsi | 7 +
arch/arm/boot/dts/tegra124.dtsi | 7 +
arch/arm/boot/dts/tegra20.dtsi | 7 +
arch/arm/boot/dts/tegra30.dtsi | 7 +
arch/arm/mach-tegra/Makefile | 4 -
arch/arm/mach-tegra/apbio.c | 51 ++--
arch/arm/mach-tegra/cpuidle.c | 2 +-
arch/arm/mach-tegra/flowctrl.c | 2 +-
arch/arm/mach-tegra/fuse.c | 252 -----------------
arch/arm/mach-tegra/fuse.h | 79 ------
arch/arm/mach-tegra/hotplug.c | 2 +-
arch/arm/mach-tegra/platsmp.c | 2 +-
arch/arm/mach-tegra/pm.c | 2 +-
arch/arm/mach-tegra/pmc.c | 2 +-
arch/arm/mach-tegra/powergate.c | 2 +-
arch/arm/mach-tegra/reset-handler.S | 2 +-
arch/arm/mach-tegra/reset.c | 2 +-
arch/arm/mach-tegra/sleep-tegra30.S | 2 +-
arch/arm/mach-tegra/tegra.c | 2 +-
arch/arm/mach-tegra/tegra114_speedo.c | 104 -------
arch/arm/mach-tegra/tegra20_speedo.c | 109 --------
arch/arm/mach-tegra/tegra2_emc.c | 2 +-
arch/arm/mach-tegra/tegra30_speedo.c | 292 -------------------
drivers/misc/Makefile | 1 +
drivers/misc/fuse/Makefile | 1 +
drivers/misc/fuse/tegra/Makefile | 7 +
drivers/misc/fuse/tegra/fuse-tegra.c | 228 +++++++++++++++
drivers/misc/fuse/tegra/fuse-tegra20.c | 136 +++++++++
drivers/misc/fuse/tegra/fuse-tegra30.c | 178 ++++++++++++
drivers/misc/fuse/tegra/fuse.h | 82 ++++++
drivers/misc/fuse/tegra/tegra114_speedo.c | 110 ++++++++
drivers/misc/fuse/tegra/tegra124_speedo.c | 164 +++++++++++
drivers/misc/fuse/tegra/tegra20_speedo.c | 110 ++++++++
drivers/misc/fuse/tegra/tegra30_speedo.c | 294 ++++++++++++++++++++
include/linux/tegra-soc.h | 39 +++
37 files changed, 1461 insertions(+), 872 deletions(-)
create mode 100644 Documentation/ABI/testing/sysfs-driver-tegra-fuse
create mode 100644 Documentation/devicetree/bindings/fuse/fuse-tegra.txt
delete mode 100644 arch/arm/mach-tegra/fuse.c
delete mode 100644 arch/arm/mach-tegra/fuse.h
delete mode 100644 arch/arm/mach-tegra/tegra114_speedo.c
delete mode 100644 arch/arm/mach-tegra/tegra20_speedo.c
delete mode 100644 arch/arm/mach-tegra/tegra30_speedo.c
create mode 100644 drivers/misc/fuse/Makefile
create mode 100644 drivers/misc/fuse/tegra/Makefile
create mode 100644 drivers/misc/fuse/tegra/fuse-tegra.c
create mode 100644 drivers/misc/fuse/tegra/fuse-tegra20.c
create mode 100644 drivers/misc/fuse/tegra/fuse-tegra30.c
create mode 100644 drivers/misc/fuse/tegra/fuse.h
create mode 100644 drivers/misc/fuse/tegra/tegra114_speedo.c
create mode 100644 drivers/misc/fuse/tegra/tegra124_speedo.c
create mode 100644 drivers/misc/fuse/tegra/tegra20_speedo.c
create mode 100644 drivers/misc/fuse/tegra/tegra30_speedo.c
--
1.7.7.rc0.72.g4b5ea.dirty
^ permalink raw reply [flat|nested] 21+ messages in thread
* [PATCH v3 1/6] ARM: tegra: export apb dma readl/writel
2014-01-28 23:36 [PATCH v3 0/6] efuse driver for Tegra Peter De Schrijver
@ 2014-01-28 23:36 ` Peter De Schrijver
2014-01-28 23:36 ` [PATCH v3 2/6] ARM: tegra: Add chipid, revision and fuse init Peter De Schrijver
` (6 subsequent siblings)
7 siblings, 0 replies; 21+ messages in thread
From: Peter De Schrijver @ 2014-01-28 23:36 UTC (permalink / raw)
To: linux-arm-kernel
Export APB DMA readl and writel. These are needed because we can't access
the fuses directly on Tegra20 without potentially causing a system hang.
Also have the APB DMA readl and writel return an error in case of a read
failure instead of just returning zero or ignore write failures.
Signed-off-by: Peter De Schrijver <pdeschrijver@nvidia.com>
---
arch/arm/mach-tegra/apbio.c | 51 ++++++++++++++++++++++++++----------------
include/linux/tegra-soc.h | 14 +++++++++++
2 files changed, 45 insertions(+), 20 deletions(-)
diff --git a/arch/arm/mach-tegra/apbio.c b/arch/arm/mach-tegra/apbio.c
index bc47197..e0bf49d 100644
--- a/arch/arm/mach-tegra/apbio.c
+++ b/arch/arm/mach-tegra/apbio.c
@@ -32,8 +32,8 @@ static u32 *tegra_apb_bb;
static dma_addr_t tegra_apb_bb_phys;
static DECLARE_COMPLETION(tegra_apb_wait);
-static u32 tegra_apb_readl_direct(unsigned long offset);
-static void tegra_apb_writel_direct(u32 value, unsigned long offset);
+static int tegra_apb_readl_direct(unsigned long offset, u32 *value);
+static int tegra_apb_writel_direct(u32 value, unsigned long offset);
static struct dma_chan *tegra_apb_dma_chan;
static struct dma_slave_config dma_sconfig;
@@ -128,58 +128,64 @@ static int do_dma_transfer(unsigned long apb_add,
return 0;
}
-static u32 tegra_apb_readl_using_dma(unsigned long offset)
+int tegra_apb_readl_using_dma(unsigned long offset, u32 *value)
{
int ret;
if (!tegra_apb_dma_chan && !tegra_apb_dma_init())
- return tegra_apb_readl_direct(offset);
+ return tegra_apb_readl_direct(offset, value);
mutex_lock(&tegra_apb_dma_lock);
ret = do_dma_transfer(offset, DMA_DEV_TO_MEM);
- if (ret < 0) {
+ if (ret < 0)
pr_err("error in reading offset 0x%08lx using dma\n", offset);
- *(u32 *)tegra_apb_bb = 0;
- }
+ else
+ *value = *tegra_apb_bb;
+
mutex_unlock(&tegra_apb_dma_lock);
- return *((u32 *)tegra_apb_bb);
+
+ return ret;
}
-static void tegra_apb_writel_using_dma(u32 value, unsigned long offset)
+int tegra_apb_writel_using_dma(u32 value, unsigned long offset)
{
int ret;
- if (!tegra_apb_dma_chan && !tegra_apb_dma_init()) {
- tegra_apb_writel_direct(value, offset);
- return;
- }
+ if (!tegra_apb_dma_chan && !tegra_apb_dma_init())
+ return tegra_apb_writel_direct(value, offset);
mutex_lock(&tegra_apb_dma_lock);
*((u32 *)tegra_apb_bb) = value;
ret = do_dma_transfer(offset, DMA_MEM_TO_DEV);
+ mutex_unlock(&tegra_apb_dma_lock);
if (ret < 0)
pr_err("error in writing offset 0x%08lx using dma\n", offset);
- mutex_unlock(&tegra_apb_dma_lock);
+
+ return ret;
}
#else
#define tegra_apb_readl_using_dma tegra_apb_readl_direct
#define tegra_apb_writel_using_dma tegra_apb_writel_direct
#endif
-typedef u32 (*apbio_read_fptr)(unsigned long offset);
-typedef void (*apbio_write_fptr)(u32 value, unsigned long offset);
+typedef int (*apbio_read_fptr)(unsigned long offset, u32 *value);
+typedef int (*apbio_write_fptr)(u32 value, unsigned long offset);
static apbio_read_fptr apbio_read;
static apbio_write_fptr apbio_write;
-static u32 tegra_apb_readl_direct(unsigned long offset)
+static int tegra_apb_readl_direct(unsigned long offset, u32 *value)
{
- return readl(IO_ADDRESS(offset));
+ *value = readl(IO_ADDRESS(offset));
+
+ return 0;
}
-static void tegra_apb_writel_direct(u32 value, unsigned long offset)
+static int tegra_apb_writel_direct(u32 value, unsigned long offset)
{
writel(value, IO_ADDRESS(offset));
+
+ return 0;
}
void tegra_apb_io_init(void)
@@ -197,7 +203,12 @@ void tegra_apb_io_init(void)
u32 tegra_apb_readl(unsigned long offset)
{
- return apbio_read(offset);
+ u32 val;
+
+ if (apbio_read(offset, &val) < 0)
+ return 0;
+ else
+ return val;
}
void tegra_apb_writel(u32 value, unsigned long offset)
diff --git a/include/linux/tegra-soc.h b/include/linux/tegra-soc.h
index 95f611d..b02d73b 100644
--- a/include/linux/tegra-soc.h
+++ b/include/linux/tegra-soc.h
@@ -19,4 +19,18 @@
u32 tegra_read_chipid(void);
+
+#if defined(CONFIG_TEGRA20_APB_DMA)
+int tegra_apb_readl_using_dma(unsigned long offset, u32 *value);
+int tegra_apb_writel_using_dma(u32 value, unsigned long offset);
+#else
+static inline int tegra_apb_readl_using_dma(unsigned long offset, u32 *value)
+{
+ return -EINVAL;
+}
+static inline int tegra_apb_writel_using_dma(u32 value, unsigned long offset)
+{
+ return -EINVAL;
+}
+#endif
#endif /* __LINUX_TEGRA_SOC_H_ */
--
1.7.7.rc0.72.g4b5ea.dirty
^ permalink raw reply related [flat|nested] 21+ messages in thread
* [PATCH v3 2/6] ARM: tegra: Add chipid, revision and fuse init
2014-01-28 23:36 [PATCH v3 0/6] efuse driver for Tegra Peter De Schrijver
2014-01-28 23:36 ` [PATCH v3 1/6] ARM: tegra: export apb dma readl/writel Peter De Schrijver
@ 2014-01-28 23:36 ` Peter De Schrijver
2014-02-05 18:40 ` Stephen Warren
2014-01-28 23:36 ` [PATCH v3 3/6] misc: fuse: Add efuse driver for Tegra Peter De Schrijver
` (5 subsequent siblings)
7 siblings, 1 reply; 21+ messages in thread
From: Peter De Schrijver @ 2014-01-28 23:36 UTC (permalink / raw)
To: linux-arm-kernel
All fuse related functionality will move to a driver in the following patches.
To prepare for this, export all the required functionality in a global header
file and move all users of fuse.h to tegra-soc.h
Signed-off-by: Peter De Schrijver <pdeschrijver@nvidia.com>
---
arch/arm/mach-tegra/cpuidle.c | 2 +-
arch/arm/mach-tegra/flowctrl.c | 2 +-
arch/arm/mach-tegra/fuse.h | 18 ------------------
arch/arm/mach-tegra/hotplug.c | 2 +-
arch/arm/mach-tegra/platsmp.c | 2 +-
arch/arm/mach-tegra/pm.c | 2 +-
arch/arm/mach-tegra/pmc.c | 2 +-
arch/arm/mach-tegra/powergate.c | 2 +-
arch/arm/mach-tegra/reset-handler.S | 2 +-
arch/arm/mach-tegra/reset.c | 2 +-
arch/arm/mach-tegra/sleep-tegra30.S | 2 +-
arch/arm/mach-tegra/tegra.c | 2 +-
arch/arm/mach-tegra/tegra114_speedo.c | 1 +
arch/arm/mach-tegra/tegra20_speedo.c | 1 +
arch/arm/mach-tegra/tegra2_emc.c | 2 +-
arch/arm/mach-tegra/tegra30_speedo.c | 1 +
include/linux/tegra-soc.h | 25 +++++++++++++++++++++++++
17 files changed, 40 insertions(+), 30 deletions(-)
diff --git a/arch/arm/mach-tegra/cpuidle.c b/arch/arm/mach-tegra/cpuidle.c
index 7bc5d8d..ff0a10b 100644
--- a/arch/arm/mach-tegra/cpuidle.c
+++ b/arch/arm/mach-tegra/cpuidle.c
@@ -23,8 +23,8 @@
#include <linux/kernel.h>
#include <linux/module.h>
+#include <linux/tegra-soc.h>
-#include "fuse.h"
#include "cpuidle.h"
void __init tegra_cpuidle_init(void)
diff --git a/arch/arm/mach-tegra/flowctrl.c b/arch/arm/mach-tegra/flowctrl.c
index 43ae750..d2e0197 100644
--- a/arch/arm/mach-tegra/flowctrl.c
+++ b/arch/arm/mach-tegra/flowctrl.c
@@ -21,10 +21,10 @@
#include <linux/kernel.h>
#include <linux/io.h>
#include <linux/cpumask.h>
+#include <linux/tegra-soc.h>
#include "flowctrl.h"
#include "iomap.h"
-#include "fuse.h"
static u8 flowctrl_offset_halt_cpu[] = {
FLOW_CTRL_HALT_CPU0_EVENTS,
diff --git a/arch/arm/mach-tegra/fuse.h b/arch/arm/mach-tegra/fuse.h
index c01d047..b17c4ba 100644
--- a/arch/arm/mach-tegra/fuse.h
+++ b/arch/arm/mach-tegra/fuse.h
@@ -26,21 +26,7 @@
#define SKU_ID_AP25E 27
#define SKU_ID_T25E 28
-#define TEGRA20 0x20
-#define TEGRA30 0x30
-#define TEGRA114 0x35
-#define TEGRA124 0x40
-
#ifndef __ASSEMBLY__
-enum tegra_revision {
- TEGRA_REVISION_UNKNOWN = 0,
- TEGRA_REVISION_A01,
- TEGRA_REVISION_A02,
- TEGRA_REVISION_A03,
- TEGRA_REVISION_A03p,
- TEGRA_REVISION_A04,
- TEGRA_REVISION_MAX,
-};
extern int tegra_sku_id;
extern int tegra_cpu_process_id;
@@ -48,12 +34,8 @@ extern int tegra_core_process_id;
extern int tegra_chip_id;
extern int tegra_cpu_speedo_id; /* only exist in Tegra30 and later */
extern int tegra_soc_speedo_id;
-extern enum tegra_revision tegra_revision;
-
-extern int tegra_bct_strapping;
unsigned long long tegra_chip_uid(void);
-void tegra_init_fuse(void);
bool tegra_spare_fuse(int bit);
u32 tegra_fuse_readl(unsigned long offset);
diff --git a/arch/arm/mach-tegra/hotplug.c b/arch/arm/mach-tegra/hotplug.c
index ff26af2..38c5170 100644
--- a/arch/arm/mach-tegra/hotplug.c
+++ b/arch/arm/mach-tegra/hotplug.c
@@ -10,10 +10,10 @@
#include <linux/kernel.h>
#include <linux/smp.h>
#include <linux/clk/tegra.h>
+#include <linux/tegra-soc.h>
#include <asm/smp_plat.h>
-#include "fuse.h"
#include "sleep.h"
static void (*tegra_hotplug_shutdown)(void);
diff --git a/arch/arm/mach-tegra/platsmp.c b/arch/arm/mach-tegra/platsmp.c
index eb72ae7..44409fd 100644
--- a/arch/arm/mach-tegra/platsmp.c
+++ b/arch/arm/mach-tegra/platsmp.c
@@ -19,13 +19,13 @@
#include <linux/smp.h>
#include <linux/io.h>
#include <linux/clk/tegra.h>
+#include <linux/tegra-soc.h>
#include <asm/cacheflush.h>
#include <asm/mach-types.h>
#include <asm/smp_scu.h>
#include <asm/smp_plat.h>
-#include "fuse.h"
#include "flowctrl.h"
#include "reset.h"
#include "pmc.h"
diff --git a/arch/arm/mach-tegra/pm.c b/arch/arm/mach-tegra/pm.c
index 4ae0286..b444ce7 100644
--- a/arch/arm/mach-tegra/pm.c
+++ b/arch/arm/mach-tegra/pm.c
@@ -25,6 +25,7 @@
#include <linux/suspend.h>
#include <linux/err.h>
#include <linux/clk/tegra.h>
+#include <linux/tegra-soc.h>
#include <asm/smp_plat.h>
#include <asm/cacheflush.h>
@@ -36,7 +37,6 @@
#include "iomap.h"
#include "reset.h"
#include "flowctrl.h"
-#include "fuse.h"
#include "pm.h"
#include "pmc.h"
#include "sleep.h"
diff --git a/arch/arm/mach-tegra/pmc.c b/arch/arm/mach-tegra/pmc.c
index fb79202..d8fe587 100644
--- a/arch/arm/mach-tegra/pmc.c
+++ b/arch/arm/mach-tegra/pmc.c
@@ -21,9 +21,9 @@
#include <linux/of.h>
#include <linux/of_address.h>
#include <linux/tegra-powergate.h>
+#include <linux/tegra-soc.h>
#include "flowctrl.h"
-#include "fuse.h"
#include "pm.h"
#include "pmc.h"
#include "sleep.h"
diff --git a/arch/arm/mach-tegra/powergate.c b/arch/arm/mach-tegra/powergate.c
index 3d0c537..e5c6d0f 100644
--- a/arch/arm/mach-tegra/powergate.c
+++ b/arch/arm/mach-tegra/powergate.c
@@ -30,8 +30,8 @@
#include <linux/spinlock.h>
#include <linux/clk/tegra.h>
#include <linux/tegra-powergate.h>
+#include <linux/tegra-soc.h>
-#include "fuse.h"
#include "iomap.h"
#define DPD_SAMPLE 0x020
diff --git a/arch/arm/mach-tegra/reset-handler.S b/arch/arm/mach-tegra/reset-handler.S
index 9aa6cd3..f427466 100644
--- a/arch/arm/mach-tegra/reset-handler.S
+++ b/arch/arm/mach-tegra/reset-handler.S
@@ -19,9 +19,9 @@
#include <asm/cache.h>
#include <asm/asm-offsets.h>
#include <asm/hardware/cache-l2x0.h>
+#include <linux/tegra-soc.h>
#include "flowctrl.h"
-#include "fuse.h"
#include "iomap.h"
#include "reset.h"
#include "sleep.h"
diff --git a/arch/arm/mach-tegra/reset.c b/arch/arm/mach-tegra/reset.c
index 146fe8e..203bac5 100644
--- a/arch/arm/mach-tegra/reset.c
+++ b/arch/arm/mach-tegra/reset.c
@@ -22,12 +22,12 @@
#include <asm/cacheflush.h>
#include <asm/hardware/cache-l2x0.h>
#include <asm/firmware.h>
+#include <linux/tegra-soc.h>
#include "iomap.h"
#include "irammap.h"
#include "reset.h"
#include "sleep.h"
-#include "fuse.h"
#define TEGRA_IRAM_RESET_BASE (TEGRA_IRAM_BASE + \
TEGRA_IRAM_RESET_HANDLER_OFFSET)
diff --git a/arch/arm/mach-tegra/sleep-tegra30.S b/arch/arm/mach-tegra/sleep-tegra30.S
index b16d4a57..f808c2c 100644
--- a/arch/arm/mach-tegra/sleep-tegra30.S
+++ b/arch/arm/mach-tegra/sleep-tegra30.S
@@ -15,13 +15,13 @@
*/
#include <linux/linkage.h>
+#include <linux/tegra-soc.h>
#include <asm/assembler.h>
#include <asm/asm-offsets.h>
#include <asm/cache.h>
#include "irammap.h"
-#include "fuse.h"
#include "sleep.h"
#include "flowctrl.h"
diff --git a/arch/arm/mach-tegra/tegra.c b/arch/arm/mach-tegra/tegra.c
index 303a285..3cfca20 100644
--- a/arch/arm/mach-tegra/tegra.c
+++ b/arch/arm/mach-tegra/tegra.c
@@ -34,6 +34,7 @@
#include <linux/usb/tegra_usb_phy.h>
#include <linux/clk/tegra.h>
#include <linux/irqchip.h>
+#include <linux/tegra-soc.h>
#include <asm/hardware/cache-l2x0.h>
#include <asm/mach-types.h>
@@ -46,7 +47,6 @@
#include "board.h"
#include "common.h"
#include "cpuidle.h"
-#include "fuse.h"
#include "iomap.h"
#include "irq.h"
#include "pmc.h"
diff --git a/arch/arm/mach-tegra/tegra114_speedo.c b/arch/arm/mach-tegra/tegra114_speedo.c
index 5218d48..7c73716 100644
--- a/arch/arm/mach-tegra/tegra114_speedo.c
+++ b/arch/arm/mach-tegra/tegra114_speedo.c
@@ -16,6 +16,7 @@
#include <linux/kernel.h>
#include <linux/bug.h>
+#include <linux/tegra-soc.h>
#include "fuse.h"
diff --git a/arch/arm/mach-tegra/tegra20_speedo.c b/arch/arm/mach-tegra/tegra20_speedo.c
index fa6eb57..3b1bb53 100644
--- a/arch/arm/mach-tegra/tegra20_speedo.c
+++ b/arch/arm/mach-tegra/tegra20_speedo.c
@@ -16,6 +16,7 @@
#include <linux/kernel.h>
#include <linux/bug.h>
+#include <linux/tegra-soc.h>
#include "fuse.h"
diff --git a/arch/arm/mach-tegra/tegra2_emc.c b/arch/arm/mach-tegra/tegra2_emc.c
index 3ae4a7f..26e4edb 100644
--- a/arch/arm/mach-tegra/tegra2_emc.c
+++ b/arch/arm/mach-tegra/tegra2_emc.c
@@ -24,9 +24,9 @@
#include <linux/of.h>
#include <linux/platform_device.h>
#include <linux/platform_data/tegra_emc.h>
+#include <linux/tegra-soc.h>
#include "tegra2_emc.h"
-#include "fuse.h"
#ifdef CONFIG_TEGRA_EMC_SCALING_ENABLE
static bool emc_enable = true;
diff --git a/arch/arm/mach-tegra/tegra30_speedo.c b/arch/arm/mach-tegra/tegra30_speedo.c
index 125cb16..81a958d 100644
--- a/arch/arm/mach-tegra/tegra30_speedo.c
+++ b/arch/arm/mach-tegra/tegra30_speedo.c
@@ -16,6 +16,7 @@
#include <linux/kernel.h>
#include <linux/bug.h>
+#include <linux/tegra-soc.h>
#include "fuse.h"
diff --git a/include/linux/tegra-soc.h b/include/linux/tegra-soc.h
index b02d73b..ccf42ee 100644
--- a/include/linux/tegra-soc.h
+++ b/include/linux/tegra-soc.h
@@ -17,8 +17,30 @@
#ifndef __LINUX_TEGRA_SOC_H_
#define __LINUX_TEGRA_SOC_H_
+#define TEGRA20 0x20
+#define TEGRA30 0x30
+#define TEGRA114 0x35
+#define TEGRA124 0x40
+
+#ifndef __ASSEMBLY__
+
+enum tegra_revision {
+ TEGRA_REVISION_UNKNOWN = 0,
+ TEGRA_REVISION_A01,
+ TEGRA_REVISION_A02,
+ TEGRA_REVISION_A03,
+ TEGRA_REVISION_A03p,
+ TEGRA_REVISION_A04,
+ TEGRA_REVISION_MAX,
+};
+
+u32 tegra_read_straps(void);
u32 tegra_read_chipid(void);
+void tegra_init_fuse(void);
+extern int tegra_chip_id;
+extern enum tegra_revision tegra_revision;
+extern int tegra_bct_strapping;
#if defined(CONFIG_TEGRA20_APB_DMA)
int tegra_apb_readl_using_dma(unsigned long offset, u32 *value);
@@ -33,4 +55,7 @@ static inline int tegra_apb_writel_using_dma(u32 value, unsigned long offset)
return -EINVAL;
}
#endif
+
+#endif /* __ASSEMBLY__ */
+
#endif /* __LINUX_TEGRA_SOC_H_ */
--
1.7.7.rc0.72.g4b5ea.dirty
^ permalink raw reply related [flat|nested] 21+ messages in thread
* [PATCH v3 3/6] misc: fuse: Add efuse driver for Tegra
2014-01-28 23:36 [PATCH v3 0/6] efuse driver for Tegra Peter De Schrijver
2014-01-28 23:36 ` [PATCH v3 1/6] ARM: tegra: export apb dma readl/writel Peter De Schrijver
2014-01-28 23:36 ` [PATCH v3 2/6] ARM: tegra: Add chipid, revision and fuse init Peter De Schrijver
@ 2014-01-28 23:36 ` Peter De Schrijver
2014-01-29 2:26 ` Jim Lin
2014-02-05 19:15 ` Stephen Warren
2014-01-28 23:36 ` [PATCH v3 4/6] ARM: tegra: Add efuse bindings Peter De Schrijver
` (4 subsequent siblings)
7 siblings, 2 replies; 21+ messages in thread
From: Peter De Schrijver @ 2014-01-28 23:36 UTC (permalink / raw)
To: linux-arm-kernel
Implement fuse driver for Tegra20, Tegra30, Tegra114 and Tegra124.
Signed-off-by: Peter De Schrijver <pdeschrijver@nvidia.com>
---
Documentation/ABI/testing/sysfs-driver-tegra-fuse | 8 +
drivers/misc/fuse/Makefile | 1 +
drivers/misc/fuse/tegra/Makefile | 7 +
drivers/misc/fuse/tegra/fuse-tegra.c | 228 ++++++++++++++++
drivers/misc/fuse/tegra/fuse-tegra20.c | 136 ++++++++++
drivers/misc/fuse/tegra/fuse-tegra30.c | 178 +++++++++++++
drivers/misc/fuse/tegra/fuse.h | 82 ++++++
drivers/misc/fuse/tegra/tegra114_speedo.c | 110 ++++++++
drivers/misc/fuse/tegra/tegra124_speedo.c | 164 ++++++++++++
drivers/misc/fuse/tegra/tegra20_speedo.c | 110 ++++++++
drivers/misc/fuse/tegra/tegra30_speedo.c | 294 +++++++++++++++++++++
11 files changed, 1318 insertions(+), 0 deletions(-)
create mode 100644 Documentation/ABI/testing/sysfs-driver-tegra-fuse
create mode 100644 drivers/misc/fuse/Makefile
create mode 100644 drivers/misc/fuse/tegra/Makefile
create mode 100644 drivers/misc/fuse/tegra/fuse-tegra.c
create mode 100644 drivers/misc/fuse/tegra/fuse-tegra20.c
create mode 100644 drivers/misc/fuse/tegra/fuse-tegra30.c
create mode 100644 drivers/misc/fuse/tegra/fuse.h
create mode 100644 drivers/misc/fuse/tegra/tegra114_speedo.c
create mode 100644 drivers/misc/fuse/tegra/tegra124_speedo.c
create mode 100644 drivers/misc/fuse/tegra/tegra20_speedo.c
create mode 100644 drivers/misc/fuse/tegra/tegra30_speedo.c
diff --git a/Documentation/ABI/testing/sysfs-driver-tegra-fuse b/Documentation/ABI/testing/sysfs-driver-tegra-fuse
new file mode 100644
index 0000000..3b5e1ea
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-driver-tegra-fuse
@@ -0,0 +1,8 @@
+What: /sys/devices/*/<our-device>/fuse
+Date: December 2013
+Contact: Peter De Schrijver <pdeschrijver@nvidia.com>
+Description: read-only access to the efuses on Tegra20, Tegra30, Tegra114
+ and Tegra124 SoC's from NVIDIA. The efuses contain write once
+ data programmed at the factory.
+Users: any user space application which wants to read the efuses on
+ Tegra SoC's
diff --git a/drivers/misc/fuse/Makefile b/drivers/misc/fuse/Makefile
new file mode 100644
index 0000000..0679c4f
--- /dev/null
+++ b/drivers/misc/fuse/Makefile
@@ -0,0 +1 @@
+obj-$(CONFIG_ARCH_TEGRA) += tegra/
diff --git a/drivers/misc/fuse/tegra/Makefile b/drivers/misc/fuse/tegra/Makefile
new file mode 100644
index 0000000..42829b3
--- /dev/null
+++ b/drivers/misc/fuse/tegra/Makefile
@@ -0,0 +1,7 @@
+obj-y += fuse-tegra.o
+obj-y += fuse-tegra30.o
+obj-$(CONFIG_ARCH_TEGRA_2x_SOC) += fuse-tegra20.o
+obj-$(CONFIG_ARCH_TEGRA_2x_SOC) += tegra20_speedo.o
+obj-$(CONFIG_ARCH_TEGRA_3x_SOC) += tegra30_speedo.o
+obj-$(CONFIG_ARCH_TEGRA_114_SOC) += tegra114_speedo.o
+obj-$(CONFIG_ARCH_TEGRA_124_SOC) += tegra124_speedo.o
diff --git a/drivers/misc/fuse/tegra/fuse-tegra.c b/drivers/misc/fuse/tegra/fuse-tegra.c
new file mode 100644
index 0000000..aeecbcd
--- /dev/null
+++ b/drivers/misc/fuse/tegra/fuse-tegra.c
@@ -0,0 +1,228 @@
+/*
+ * Copyright (c) 2013-2014, NVIDIA CORPORATION. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ *
+ */
+
+#include <linux/device.h>
+#include <linux/kobject.h>
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/io.h>
+#include <linux/tegra-soc.h>
+
+#include "fuse.h"
+
+int tegra_chip_id;
+enum tegra_revision tegra_revision;
+
+/*
+ * The BCT to use at boot is specified by board straps that can be read
+ * through a APB misc register and decoded. 2 bits, i.e. 4 possible BCTs.
+ */
+int tegra_bct_strapping;
+
+#define TEGRA_STRAP_OPT 0x8
+#define TEGRA_RAM_ID_SHIFT 4
+#define TEGRA_RAM_ID_MASK 3
+
+static u32 (*fuse_readl)(const unsigned int offset);
+static int fuse_size;
+static void __iomem *fuse_base;
+static void __iomem *apbmisc_base;
+static void __iomem *car_base;
+
+static const char *tegra_revision_name[TEGRA_REVISION_MAX] = {
+ [TEGRA_REVISION_UNKNOWN] = "unknown",
+ [TEGRA_REVISION_A01] = "A01",
+ [TEGRA_REVISION_A02] = "A02",
+ [TEGRA_REVISION_A03] = "A03",
+ [TEGRA_REVISION_A03p] = "A03 prime",
+ [TEGRA_REVISION_A04] = "A04",
+};
+
+static u8 fuse_readb(const unsigned int offset)
+{
+ u32 val;
+
+ val = fuse_readl(round_down(offset, 4));
+ val >>= (offset % 4) * 8;
+ val &= 0xff;
+
+ return val;
+}
+
+static ssize_t fuse_read(struct file *fd, struct kobject *kobj,
+ struct bin_attribute *attr, char *buf,
+ loff_t pos, size_t size)
+{
+ int i;
+
+ if (pos < 0 || pos >= fuse_size)
+ return 0;
+
+ if (size > fuse_size - pos)
+ size = fuse_size - pos;
+
+ for (i = 0; i < size; i++)
+ buf[i] = fuse_readb(pos + i);
+
+ return i;
+}
+
+static struct bin_attribute fuse_bin_attr = {
+ .attr = { .name = "fuse", .mode = S_IRUGO, },
+ .read = fuse_read,
+};
+
+static const struct of_device_id tegra_fuse_match[] __initconst = {
+ { .compatible = "nvidia,tegra20-efuse", },
+ { .compatible = "nvidia,tegra30-efuse", },
+ { .compatible = "nvidia,tegra114-efuse", },
+ { .compatible = "nvidia,tegra124-efuse", },
+ {},
+};
+
+static const struct of_device_id car_match[] __initconst = {
+ { .compatible = "nvidia,tegra20-car", },
+ { .compatible = "nvidia,tegra30-car", },
+ { .compatible = "nvidia,tegra114-car", },
+ { .compatible = "nvidia,tegra124-car", },
+ {},
+};
+
+static void tegra_read_bct_strapping(void)
+{
+ tegra_bct_strapping = readl_relaxed(apbmisc_base +
+ TEGRA_STRAP_OPT);
+ tegra_bct_strapping >>= TEGRA_RAM_ID_SHIFT;
+ tegra_bct_strapping &= TEGRA_RAM_ID_MASK;
+}
+
+static void tegra_get_revision(u32 id)
+{
+ u32 minor_rev = (id >> 16) & 0xf;
+
+ switch (minor_rev) {
+ case 1:
+ tegra_revision = TEGRA_REVISION_A01;
+ break;
+ case 2:
+ tegra_revision = TEGRA_REVISION_A02;
+ break;
+ case 3:
+ if (tegra_chip_id == TEGRA20 &&
+ (tegra20_spare_fuse_early(18, fuse_base) ||
+ tegra20_spare_fuse_early(19, fuse_base)))
+ tegra_revision = TEGRA_REVISION_A03p;
+ else
+ tegra_revision = TEGRA_REVISION_A03;
+ break;
+ case 4:
+ tegra_revision = TEGRA_REVISION_A04;
+ break;
+ default:
+ tegra_revision = TEGRA_REVISION_UNKNOWN;
+ }
+}
+
+u32 tegra_read_straps(void)
+{
+ return readl(apbmisc_base + TEGRA_STRAP_OPT);
+}
+
+u32 tegra_read_chipid(void)
+{
+ return readl_relaxed(apbmisc_base + 0x804);
+}
+
+int tegra_fuse_create_sysfs(struct device *dev, int size,
+ u32 (*readl)(const unsigned int offset),
+ struct tegra_sku_info *sku_info)
+{
+ int err;
+
+ if (fuse_size)
+ return -ENODEV;
+
+ fuse_bin_attr.size = size;
+ fuse_bin_attr.read = fuse_read;
+
+ fuse_size = size;
+ fuse_readl = readl;
+
+ err = device_create_bin_file(dev, &fuse_bin_attr);
+ if (err)
+ return err;
+
+ dev_info(dev,
+ "Tegra Revision: %s SKU: %d CPU Process: %d Core Process: %d\n",
+ tegra_revision_name[sku_info->revision],
+ sku_info->sku_id, sku_info->cpu_process_id,
+ sku_info->core_process_id);
+
+ return 0;
+}
+
+void __init tegra_init_fuse(void)
+{
+ struct device_node *np;
+ u32 id, reg;
+
+ np = of_find_matching_node(NULL, tegra_fuse_match);
+ fuse_base = of_iomap(np, 0);
+ if (!fuse_base) {
+ pr_err("ioremap tegra fuse failed\n");
+ return;
+ }
+
+ apbmisc_base = of_iomap(np, 1);
+ if (!apbmisc_base) {
+ pr_err("ioremap tegra apbmisc failed\n");
+ iounmap(fuse_base);
+ return;
+ }
+
+ np = of_find_matching_node(NULL, car_match);
+ car_base = of_iomap(np, 0);
+ if (!car_base) {
+ pr_err("ioremap tegra car failed\n");
+ iounmap(fuse_base);
+ iounmap(apbmisc_base);
+ return;
+ }
+
+ reg = readl_relaxed(car_base + 0x48);
+ reg |= 1 << 28;
+ writel(reg, car_base + 0x48);
+
+ /*
+ * Enable FUSE clock. This needs to be hardcoded because the clock
+ * subsystem is not active during early boot.
+ */
+ reg = readl(car_base + 0x14);
+ reg |= 1 << 7;
+ writel(reg, car_base + 0x14);
+
+ iounmap(car_base);
+
+ id = tegra_read_chipid();
+ tegra_chip_id = (id >> 8) & 0xff;
+
+ tegra_read_bct_strapping();
+
+ tegra_get_revision(id);
+}
diff --git a/drivers/misc/fuse/tegra/fuse-tegra20.c b/drivers/misc/fuse/tegra/fuse-tegra20.c
new file mode 100644
index 0000000..45bdfb8
--- /dev/null
+++ b/drivers/misc/fuse/tegra/fuse-tegra20.c
@@ -0,0 +1,136 @@
+/*
+ * Copyright (c) 2013-2014, NVIDIA CORPORATION. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ *
+ * Based on drivers/misc/eeprom/sunxi_sid.c
+ */
+
+#include <linux/device.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/kobject.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/random.h>
+#include <linux/tegra-soc.h>
+
+#include "fuse.h"
+
+#define FUSE_BEGIN 0x100
+#define FUSE_SIZE 0x1f8
+#define FUSE_SKU_INFO 0x10
+#define FUSE_UID_LOW 0x08
+#define FUSE_UID_HIGH 0x0c
+
+static phys_addr_t fuse_phys;
+static struct clk *fuse_clk;
+static struct tegra_sku_info sku_info;
+
+static u32 tegra20_fuse_readl(const unsigned int offset)
+{
+ int ret;
+ u32 val;
+
+ clk_prepare_enable(fuse_clk);
+
+ ret = tegra_apb_readl_using_dma(fuse_phys + FUSE_BEGIN + offset, &val);
+
+ clk_disable_unprepare(fuse_clk);
+
+ return (ret < 0) ? 0 : val;
+}
+
+static void tegra20_fuse_add_randomness(void)
+{
+ u32 randomness[7];
+
+ randomness[0] = tegra20_fuse_readl(FUSE_SKU_INFO);
+ randomness[1] = tegra_read_straps();
+ randomness[2] = tegra_read_chipid();
+ randomness[3] = sku_info.cpu_process_id << 16;
+ randomness[3] |= sku_info.core_process_id;
+ randomness[4] = sku_info.cpu_speedo_id << 16 | sku_info.soc_speedo_id;
+ randomness[5] = tegra20_fuse_readl(FUSE_UID_LOW);
+ randomness[6] = tegra20_fuse_readl(FUSE_UID_HIGH);
+
+ add_device_randomness(randomness, sizeof(randomness));
+}
+
+bool tegra20_spare_fuse(int spare_bit)
+{
+ u32 offset = spare_bit * 4 + 0x100;
+
+ return tegra20_fuse_readl(offset) & 1;
+}
+
+bool tegra20_spare_fuse_early(int spare_bit, void *fuse_base)
+{
+ u32 offset = spare_bit * 4 + 0x100;
+
+ return readl_relaxed(fuse_base + FUSE_BEGIN + offset);
+}
+
+static const struct of_device_id tegra20_fuse_of_match[] = {
+ { .compatible = "nvidia,tegra20-efuse" },
+ {},
+}
+MODULE_DEVICE_TABLE(of, tegra20_fuse_of_match);
+
+static int tegra20_fuse_probe(struct platform_device *pdev)
+{
+ struct resource *res;
+
+ fuse_clk = devm_clk_get(&pdev->dev, NULL);
+ if (IS_ERR(fuse_clk)) {
+ dev_err(&pdev->dev, "missing clock");
+ return PTR_ERR(fuse_clk);
+ }
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!res)
+ return -EINVAL;
+ fuse_phys = res->start;
+
+ sku_info.revision = tegra_revision;
+ tegra20_init_speedo_data(&sku_info, &pdev->dev);
+ dev_dbg(&pdev->dev, "Soc Speedo ID %d", sku_info.soc_speedo_id);
+
+ tegra20_fuse_add_randomness();
+
+ if (tegra_fuse_create_sysfs(&pdev->dev, FUSE_SIZE, tegra20_fuse_readl,
+ &sku_info))
+ return -ENODEV;
+
+ dev_dbg(&pdev->dev, "loaded\n");
+
+ return 0;
+}
+
+static struct platform_driver tegra20_fuse_driver = {
+ .probe = tegra20_fuse_probe,
+ .driver = {
+ .name = "tegra20_fuse",
+ .owner = THIS_MODULE,
+ .of_match_table = tegra20_fuse_of_match,
+ }
+};
+
+static int __init tegra20_fuse_init(void)
+{
+ return platform_driver_register(&tegra20_fuse_driver);
+}
+postcore_initcall(tegra20_fuse_init);
diff --git a/drivers/misc/fuse/tegra/fuse-tegra30.c b/drivers/misc/fuse/tegra/fuse-tegra30.c
new file mode 100644
index 0000000..6133b77
--- /dev/null
+++ b/drivers/misc/fuse/tegra/fuse-tegra30.c
@@ -0,0 +1,178 @@
+/*
+ * Copyright (c) 2013-2014, NVIDIA CORPORATION. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ *
+ */
+
+#include <linux/device.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/random.h>
+#include <linux/tegra-soc.h>
+
+#include "fuse.h"
+
+#define FUSE_BEGIN 0x100
+
+#define FUSE_SKU_INFO 0x10
+
+/* Tegra30 and later */
+#define FUSE_VENDOR_CODE 0x100
+#define FUSE_FAB_CODE 0x104
+#define FUSE_LOT_CODE_0 0x108
+#define FUSE_LOT_CODE_1 0x10c
+#define FUSE_WAFER_ID 0x110
+#define FUSE_X_COORDINATE 0x114
+#define FUSE_Y_COORDINATE 0x118
+
+#define FUSE_HAS_REVISION_INFO BIT(0)
+
+struct tegra_fuse_info {
+ int size;
+ int spare_bit;
+ void (*init_speedo_data)(struct tegra_sku_info *sku_info,
+ struct device *dev);
+};
+
+static void __iomem *fuse_base;
+static struct clk *fuse_clk;
+static struct tegra_fuse_info *fuse_info;
+static struct tegra_sku_info sku_info;
+
+u32 tegra30_fuse_readl(const unsigned int offset)
+{
+ u32 val;
+
+ clk_prepare_enable(fuse_clk);
+
+ val = readl_relaxed(fuse_base + FUSE_BEGIN + offset);
+
+ clk_disable_unprepare(fuse_clk);
+
+ return val;
+}
+
+bool tegra30_spare_fuse(int spare_bit)
+{
+ u32 offset = fuse_info->spare_bit + spare_bit * 4;
+
+ return tegra30_fuse_readl(offset) & 1;
+}
+
+static void tegra30_fuse_add_randomness(void)
+{
+ u32 randomness[12];
+
+ randomness[0] = tegra30_fuse_readl(FUSE_SKU_INFO);
+ randomness[1] = tegra_read_straps();
+ randomness[2] = tegra_read_chipid();
+ randomness[3] = sku_info.cpu_process_id << 16;
+ randomness[3] |= sku_info.core_process_id;
+ randomness[4] = sku_info.cpu_speedo_id << 16;
+ randomness[4] |= sku_info.soc_speedo_id;
+ randomness[5] = tegra30_fuse_readl(FUSE_VENDOR_CODE);
+ randomness[6] = tegra30_fuse_readl(FUSE_FAB_CODE);
+ randomness[7] = tegra30_fuse_readl(FUSE_LOT_CODE_0);
+ randomness[8] = tegra30_fuse_readl(FUSE_LOT_CODE_1);
+ randomness[9] = tegra30_fuse_readl(FUSE_WAFER_ID);
+ randomness[10] = tegra30_fuse_readl(FUSE_X_COORDINATE);
+ randomness[11] = tegra30_fuse_readl(FUSE_Y_COORDINATE);
+
+ add_device_randomness(randomness, sizeof(randomness));
+}
+
+static struct tegra_fuse_info tegra30_info = {
+ .size = 0x2a4,
+ .spare_bit = 0x144,
+ .init_speedo_data = tegra30_init_speedo_data,
+};
+
+static struct tegra_fuse_info tegra114_info = {
+ .size = 0x2a0,
+ .init_speedo_data = tegra114_init_speedo_data,
+};
+
+static struct tegra_fuse_info tegra124_info = {
+ .size = 0x300,
+ .init_speedo_data = tegra124_init_speedo_data,
+};
+
+static const struct of_device_id tegra30_fuse_of_match[] = {
+ { .compatible = "nvidia,tegra30-efuse", .data = &tegra30_info },
+ { .compatible = "nvidia,tegra114-efuse", .data = &tegra114_info },
+ { .compatible = "nvidia,tegra124-efuse", .data = &tegra124_info },
+ {},
+};
+
+static int tegra30_fuse_probe(struct platform_device *pdev)
+{
+ const struct of_device_id *of_dev_id;
+ struct resource *res;
+
+ of_dev_id = of_match_device(tegra30_fuse_of_match, &pdev->dev);
+ if (!of_dev_id)
+ return -ENODEV;
+ fuse_info = (struct tegra_fuse_info *)of_dev_id->data;
+
+ fuse_clk = devm_clk_get(&pdev->dev, NULL);
+ if (IS_ERR(fuse_clk)) {
+ dev_err(&pdev->dev, "missing clock");
+ return PTR_ERR(fuse_clk);
+ }
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ fuse_base = devm_ioremap_resource(&pdev->dev, res);
+ if (IS_ERR(fuse_base)) {
+ dev_err(&pdev->dev, "unable to map base address");
+ return PTR_ERR(fuse_base);
+ }
+
+ sku_info.revision = tegra_revision;
+ fuse_info->init_speedo_data(&sku_info, &pdev->dev);
+ dev_dbg(&pdev->dev, "CPU Speedo ID %d, Soc Speedo ID %d",
+ sku_info.cpu_speedo_id, sku_info.soc_speedo_id);
+
+ tegra30_fuse_add_randomness();
+
+ platform_set_drvdata(pdev, NULL);
+
+ if (tegra_fuse_create_sysfs(&pdev->dev, fuse_info->size,
+ tegra30_fuse_readl, &sku_info))
+ return -ENODEV;
+
+ dev_dbg(&pdev->dev, "loaded\n");
+
+ return 0;
+}
+
+static struct platform_driver tegra30_fuse_driver = {
+ .probe = tegra30_fuse_probe,
+ .driver = {
+ .name = "tegra_fuse",
+ .owner = THIS_MODULE,
+ .of_match_table = tegra30_fuse_of_match,
+ }
+};
+
+static int __init tegra30_fuse_init(void)
+{
+ return platform_driver_register(&tegra30_fuse_driver);
+}
+postcore_initcall(tegra30_fuse_init);
+
diff --git a/drivers/misc/fuse/tegra/fuse.h b/drivers/misc/fuse/tegra/fuse.h
new file mode 100644
index 0000000..0baf82b
--- /dev/null
+++ b/drivers/misc/fuse/tegra/fuse.h
@@ -0,0 +1,82 @@
+/*
+ * Copyright (C) 2010 Google, Inc.
+ * Copyright (c) 2013, NVIDIA CORPORATION. All rights reserved.
+ *
+ * Author:
+ * Colin Cross <ccross@android.com>
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#ifndef __DRIVERS_MISC_TEGRA_FUSE_H
+#define __DRIVERS_MISC_TEGRA_FUSE_H
+
+struct tegra_sku_info {
+ int sku_id;
+ int cpu_process_id;
+ int cpu_speedo_id;
+ int cpu_speedo_value;
+ int cpu_iddq_value;
+ int core_process_id;
+ int soc_speedo_id;
+ int gpu_speedo_id;
+ int gpu_process_id;
+ int gpu_speedo_value;
+ enum tegra_revision revision;
+};
+
+int tegra_fuse_create_sysfs(struct device *dev, int size,
+ u32 (*readl)(const unsigned int offset),
+ struct tegra_sku_info *sku_info);
+
+bool tegra30_spare_fuse(int bit);
+u32 tegra30_fuse_readl(const unsigned int offset);
+
+#ifdef CONFIG_ARCH_TEGRA_2x_SOC
+void tegra20_init_speedo_data(struct tegra_sku_info *sku_info,
+ struct device *dev);
+bool tegra20_spare_fuse(int bit);
+bool tegra20_spare_fuse_early(int spare_bit, void *fuse_base);
+#else
+static inline void tegra20_init_speedo_data(struct tegra_sku_info *sku_info,
+ struct device *dev) {}
+static inline bool tegra20_spare_fuse(int bit) { return false; }
+static inline bool tegra20_spare_fuse_early(int spare_bit, void *fuse_base)
+{
+ return false;
+}
+#endif
+
+#ifdef CONFIG_ARCH_TEGRA_3x_SOC
+void tegra30_init_speedo_data(struct tegra_sku_info *sku_info,
+ struct device *dev);
+#else
+static inline void tegra30_init_speedo_data(struct tegra_sku_info *sku_info,
+ struct device *dev) {}
+#endif
+
+#ifdef CONFIG_ARCH_TEGRA_114_SOC
+void tegra114_init_speedo_data(struct tegra_sku_info *sku_info,
+ struct device *dev);
+#else
+static inline void tegra114_init_speedo_data(struct tegra_sku_info *sku_info,
+ struct device *dev) {}
+#endif
+
+#ifdef CONFIG_ARCH_TEGRA_124_SOC
+void tegra124_init_speedo_data(struct tegra_sku_info *sku_info,
+ struct device *dev);
+#else
+static inline void tegra124_init_speedo_data(struct tegra_sku_info *sku_info,
+ struct device *dev) {}
+#endif
+
+#endif
diff --git a/drivers/misc/fuse/tegra/tegra114_speedo.c b/drivers/misc/fuse/tegra/tegra114_speedo.c
new file mode 100644
index 0000000..7be8ba5
--- /dev/null
+++ b/drivers/misc/fuse/tegra/tegra114_speedo.c
@@ -0,0 +1,110 @@
+/*
+ * Copyright (c) 2013-2014, NVIDIA CORPORATION. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <linux/device.h>
+#include <linux/kernel.h>
+#include <linux/bug.h>
+#include <linux/tegra-soc.h>
+
+#include "fuse.h"
+
+#define CORE_PROCESS_CORNERS_NUM 2
+#define CPU_PROCESS_CORNERS_NUM 2
+
+enum {
+ THRESHOLD_INDEX_0,
+ THRESHOLD_INDEX_1,
+ THRESHOLD_INDEX_COUNT,
+};
+
+static const u32 core_process_speedos[][CORE_PROCESS_CORNERS_NUM] = {
+ {1123, UINT_MAX},
+ {0, UINT_MAX},
+};
+
+static const u32 cpu_process_speedos[][CPU_PROCESS_CORNERS_NUM] = {
+ {1695, UINT_MAX},
+ {0, UINT_MAX},
+};
+
+static void rev_sku_to_speedo_ids(struct tegra_sku_info *sku_info,
+ int *threshold, struct device *dev)
+{
+ u32 tmp;
+ u32 sku = sku_info->sku_id;
+ enum tegra_revision rev = sku_info->revision;
+
+ switch (sku) {
+ case 0x00:
+ case 0x10:
+ case 0x05:
+ case 0x06:
+ sku_info->cpu_speedo_id = 1;
+ sku_info->soc_speedo_id = 0;
+ *threshold = THRESHOLD_INDEX_0;
+ break;
+
+ case 0x03:
+ case 0x04:
+ sku_info->cpu_speedo_id = 2;
+ sku_info->soc_speedo_id = 1;
+ *threshold = THRESHOLD_INDEX_1;
+ break;
+
+ default:
+ dev_err(dev, "Unknown SKU %d\n", sku);
+ sku_info->cpu_speedo_id = 0;
+ sku_info->soc_speedo_id = 0;
+ *threshold = THRESHOLD_INDEX_0;
+ break;
+ }
+
+ if (rev == TEGRA_REVISION_A01) {
+ tmp = tegra30_fuse_readl(0x270) << 1;
+ tmp |= tegra30_fuse_readl(0x26c);
+ if (!tmp)
+ sku_info->cpu_speedo_id = 0;
+ }
+}
+
+void tegra114_init_speedo_data(struct tegra_sku_info *sku_info,
+ struct device *dev)
+{
+ u32 cpu_speedo_val;
+ u32 core_speedo_val;
+ int threshold;
+ int i;
+
+ BUILD_BUG_ON(ARRAY_SIZE(cpu_process_speedos) !=
+ THRESHOLD_INDEX_COUNT);
+ BUILD_BUG_ON(ARRAY_SIZE(core_process_speedos) !=
+ THRESHOLD_INDEX_COUNT);
+
+ rev_sku_to_speedo_ids(sku_info, &threshold, dev);
+
+ cpu_speedo_val = tegra30_fuse_readl(0x12c) + 1024;
+ core_speedo_val = tegra30_fuse_readl(0x134);
+
+ for (i = 0; i < CPU_PROCESS_CORNERS_NUM; i++)
+ if (cpu_speedo_val < cpu_process_speedos[threshold][i])
+ break;
+ sku_info->cpu_process_id = i;
+
+ for (i = 0; i < CORE_PROCESS_CORNERS_NUM; i++)
+ if (core_speedo_val < core_process_speedos[threshold][i])
+ break;
+ sku_info->core_process_id = i;
+}
diff --git a/drivers/misc/fuse/tegra/tegra124_speedo.c b/drivers/misc/fuse/tegra/tegra124_speedo.c
new file mode 100644
index 0000000..70edb2d
--- /dev/null
+++ b/drivers/misc/fuse/tegra/tegra124_speedo.c
@@ -0,0 +1,164 @@
+/*
+ * Copyright (c) 2013-2014, NVIDIA CORPORATION. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <linux/device.h>
+#include <linux/kernel.h>
+#include <linux/bug.h>
+#include <linux/tegra-soc.h>
+
+#include "fuse.h"
+
+#define CPU_PROCESS_CORNERS_NUM 2
+#define GPU_PROCESS_CORNERS_NUM 2
+#define CORE_PROCESS_CORNERS_NUM 2
+
+#define FUSE_CPU_SPEEDO_0 0x14
+#define FUSE_CPU_SPEEDO_1 0x2c
+#define FUSE_CPU_SPEEDO_2 0x30
+#define FUSE_SOC_SPEEDO_0 0x34
+#define FUSE_SOC_SPEEDO_1 0x38
+#define FUSE_SOC_SPEEDO_2 0x3c
+#define FUSE_CPU_IDDQ 0x18
+#define FUSE_SOC_IDDQ 0x40
+#define FUSE_GPU_IDDQ 0x128
+#define FUSE_FT_REV 0x28
+
+enum {
+ THRESHOLD_INDEX_0,
+ THRESHOLD_INDEX_1,
+ THRESHOLD_INDEX_COUNT,
+};
+
+static int cpu_speedo_0_value;
+static int cpu_speedo_1_value;
+static int soc_speedo_0_value;
+static int soc_speedo_1_value;
+static int soc_speedo_2_value;
+static int cpu_iddq_value;
+static int gpu_iddq_value;
+static int soc_iddq_value;
+
+static const u32 cpu_process_speedos[][CPU_PROCESS_CORNERS_NUM] = {
+ {2190, UINT_MAX},
+ {0, UINT_MAX},
+};
+
+static const u32 gpu_process_speedos[][GPU_PROCESS_CORNERS_NUM] = {
+ {1965, UINT_MAX},
+ {0, UINT_MAX},
+};
+
+static const u32 core_process_speedos[][CORE_PROCESS_CORNERS_NUM] = {
+ {2101, UINT_MAX},
+ {0, UINT_MAX},
+};
+
+static void rev_sku_to_speedo_ids(struct tegra_sku_info *sku_info,
+ int *threshold, struct device *dev)
+{
+ int sku = sku_info->sku_id;
+
+ /* Assign to default */
+ sku_info->cpu_speedo_id = 0;
+ sku_info->soc_speedo_id = 0;
+ sku_info->gpu_speedo_id = 0;
+ *threshold = THRESHOLD_INDEX_0;
+
+ switch (sku) {
+ case 0x00: /* Eng sku */
+ case 0x0F:
+ /* Using the default */
+ break;
+
+ case 0x81:
+ case 0x83:
+ sku_info->cpu_speedo_id = 2;
+ break;
+
+ case 0x07:
+ sku_info->cpu_speedo_id = 1;
+ sku_info->soc_speedo_id = 1;
+ sku_info->gpu_speedo_id = 1;
+ *threshold = THRESHOLD_INDEX_1;
+ break;
+
+ default:
+ dev_err(dev, "Unknown SKU %d\n", sku);
+ /* Using the default for the error case */
+ break;
+ }
+}
+
+void tegra124_init_speedo_data(struct tegra_sku_info *sku_info,
+ struct device *dev)
+{
+ int i;
+ int threshold;
+
+ BUILD_BUG_ON(ARRAY_SIZE(cpu_process_speedos) !=
+ THRESHOLD_INDEX_COUNT);
+ BUILD_BUG_ON(ARRAY_SIZE(gpu_process_speedos) !=
+ THRESHOLD_INDEX_COUNT);
+ BUILD_BUG_ON(ARRAY_SIZE(core_process_speedos) !=
+ THRESHOLD_INDEX_COUNT);
+
+ cpu_speedo_0_value = tegra30_fuse_readl(FUSE_CPU_SPEEDO_0);
+ cpu_speedo_1_value = tegra30_fuse_readl(FUSE_CPU_SPEEDO_1);
+
+ /* GPU Speedo is stored in CPU_SPEEDO_2 */
+ sku_info->gpu_speedo_value = tegra30_fuse_readl(FUSE_CPU_SPEEDO_2);
+
+ soc_speedo_0_value = tegra30_fuse_readl(FUSE_SOC_SPEEDO_0);
+ soc_speedo_1_value = tegra30_fuse_readl(FUSE_SOC_SPEEDO_1);
+ soc_speedo_2_value = tegra30_fuse_readl(FUSE_SOC_SPEEDO_2);
+
+ cpu_iddq_value = tegra30_fuse_readl(FUSE_CPU_IDDQ);
+ soc_iddq_value = tegra30_fuse_readl(FUSE_SOC_IDDQ);
+ gpu_iddq_value = tegra30_fuse_readl(FUSE_GPU_IDDQ);
+
+ sku_info->cpu_speedo_value = cpu_speedo_0_value;
+
+ if (sku_info->cpu_speedo_value == 0) {
+ dev_warn(dev, "Warning: Speedo value not fused.\n");
+ WARN_ON(1);
+ return;
+ }
+
+ rev_sku_to_speedo_ids(sku_info, &threshold, dev);
+
+ sku_info->cpu_iddq_value = tegra30_fuse_readl(FUSE_CPU_IDDQ);
+
+ for (i = 0; i < GPU_PROCESS_CORNERS_NUM; i++)
+ if (sku_info->gpu_speedo_value <
+ gpu_process_speedos[threshold][i])
+ break;
+ sku_info->gpu_process_id = i;
+
+ for (i = 0; i < CPU_PROCESS_CORNERS_NUM; i++)
+ if (sku_info->cpu_speedo_value <
+ cpu_process_speedos[threshold][i])
+ break;
+ sku_info->cpu_process_id = i;
+
+ for (i = 0; i < CORE_PROCESS_CORNERS_NUM; i++)
+ if (soc_speedo_0_value <
+ core_process_speedos[threshold][i])
+ break;
+ sku_info->core_process_id = i;
+
+ dev_dbg(dev, "GPU Speedo ID=%d, Speedo Value=%d\n",
+ sku_info->gpu_speedo_id, sku_info->gpu_speedo_value);
+}
diff --git a/drivers/misc/fuse/tegra/tegra20_speedo.c b/drivers/misc/fuse/tegra/tegra20_speedo.c
new file mode 100644
index 0000000..af8e86a
--- /dev/null
+++ b/drivers/misc/fuse/tegra/tegra20_speedo.c
@@ -0,0 +1,110 @@
+/*
+ * Copyright (c) 2012-2014, NVIDIA CORPORATION. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <linux/kernel.h>
+#include <linux/device.h>
+#include <linux/bug.h>
+#include <linux/tegra-soc.h>
+
+#include "fuse.h"
+
+#define CPU_SPEEDO_LSBIT 20
+#define CPU_SPEEDO_MSBIT 29
+#define CPU_SPEEDO_REDUND_LSBIT 30
+#define CPU_SPEEDO_REDUND_MSBIT 39
+#define CPU_SPEEDO_REDUND_OFFS (CPU_SPEEDO_REDUND_MSBIT - CPU_SPEEDO_MSBIT)
+
+#define CORE_SPEEDO_LSBIT 40
+#define CORE_SPEEDO_MSBIT 47
+#define CORE_SPEEDO_REDUND_LSBIT 48
+#define CORE_SPEEDO_REDUND_MSBIT 55
+#define CORE_SPEEDO_REDUND_OFFS (CORE_SPEEDO_REDUND_MSBIT - CORE_SPEEDO_MSBIT)
+
+#define SPEEDO_MULT 4
+
+#define PROCESS_CORNERS_NUM 4
+
+#define SPEEDO_ID_SELECT_0(rev) ((rev) <= 2)
+#define SPEEDO_ID_SELECT_1(sku) \
+ (((sku) != 20) && ((sku) != 23) && ((sku) != 24) && \
+ ((sku) != 27) && ((sku) != 28))
+
+enum {
+ SPEEDO_ID_0,
+ SPEEDO_ID_1,
+ SPEEDO_ID_2,
+ SPEEDO_ID_COUNT,
+};
+
+static const u32 cpu_process_speedos[][PROCESS_CORNERS_NUM] = {
+ {315, 366, 420, UINT_MAX},
+ {303, 368, 419, UINT_MAX},
+ {316, 331, 383, UINT_MAX},
+};
+
+static const u32 core_process_speedos[][PROCESS_CORNERS_NUM] = {
+ {165, 195, 224, UINT_MAX},
+ {165, 195, 224, UINT_MAX},
+ {165, 195, 224, UINT_MAX},
+};
+
+void tegra20_init_speedo_data(struct tegra_sku_info *sku_info,
+ struct device *dev)
+{
+ u32 reg;
+ u32 val;
+ int i;
+
+ BUILD_BUG_ON(ARRAY_SIZE(cpu_process_speedos) != SPEEDO_ID_COUNT);
+ BUILD_BUG_ON(ARRAY_SIZE(core_process_speedos) != SPEEDO_ID_COUNT);
+
+ if (SPEEDO_ID_SELECT_0(sku_info->revision))
+ sku_info->soc_speedo_id = SPEEDO_ID_0;
+ else if (SPEEDO_ID_SELECT_1(sku_info->sku_id))
+ sku_info->soc_speedo_id = SPEEDO_ID_1;
+ else
+ sku_info->soc_speedo_id = SPEEDO_ID_2;
+
+ val = 0;
+ for (i = CPU_SPEEDO_MSBIT; i >= CPU_SPEEDO_LSBIT; i--) {
+ reg = tegra20_spare_fuse(i) |
+ tegra20_spare_fuse(i + CPU_SPEEDO_REDUND_OFFS);
+ val = (val << 1) | (reg & 0x1);
+ }
+ val = val * SPEEDO_MULT;
+ dev_dbg(dev, "CPU speedo value %u\n", val);
+
+ for (i = 0; i < (PROCESS_CORNERS_NUM - 1); i++) {
+ if (val <= cpu_process_speedos[sku_info->soc_speedo_id][i])
+ break;
+ }
+ sku_info->cpu_process_id = i;
+
+ val = 0;
+ for (i = CORE_SPEEDO_MSBIT; i >= CORE_SPEEDO_LSBIT; i--) {
+ reg = tegra20_spare_fuse(i) |
+ tegra20_spare_fuse(i + CORE_SPEEDO_REDUND_OFFS);
+ val = (val << 1) | (reg & 0x1);
+ }
+ val = val * SPEEDO_MULT;
+ dev_dbg(dev, "Core speedo value %u\n", val);
+
+ for (i = 0; i < (PROCESS_CORNERS_NUM - 1); i++) {
+ if (val <= core_process_speedos[sku_info->soc_speedo_id][i])
+ break;
+ }
+ sku_info->core_process_id = i;
+}
diff --git a/drivers/misc/fuse/tegra/tegra30_speedo.c b/drivers/misc/fuse/tegra/tegra30_speedo.c
new file mode 100644
index 0000000..11cf0cd
--- /dev/null
+++ b/drivers/misc/fuse/tegra/tegra30_speedo.c
@@ -0,0 +1,294 @@
+/*
+ * Copyright (c) 2012-2014, NVIDIA CORPORATION. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <linux/device.h>
+#include <linux/kernel.h>
+#include <linux/bug.h>
+#include <linux/tegra-soc.h>
+
+#include "fuse.h"
+
+#define CORE_PROCESS_CORNERS_NUM 1
+#define CPU_PROCESS_CORNERS_NUM 6
+
+#define FUSE_SPEEDO_CALIB_0 0x14
+#define FUSE_PACKAGE_INFO 0XFC
+#define FUSE_TEST_PROG_VER 0X28
+
+#define G_SPEEDO_BIT_MINUS1 58
+#define G_SPEEDO_BIT_MINUS1_R 59
+#define G_SPEEDO_BIT_MINUS2 60
+#define G_SPEEDO_BIT_MINUS2_R 61
+#define LP_SPEEDO_BIT_MINUS1 62
+#define LP_SPEEDO_BIT_MINUS1_R 63
+#define LP_SPEEDO_BIT_MINUS2 64
+#define LP_SPEEDO_BIT_MINUS2_R 65
+
+enum {
+ THRESHOLD_INDEX_0,
+ THRESHOLD_INDEX_1,
+ THRESHOLD_INDEX_2,
+ THRESHOLD_INDEX_3,
+ THRESHOLD_INDEX_4,
+ THRESHOLD_INDEX_5,
+ THRESHOLD_INDEX_6,
+ THRESHOLD_INDEX_7,
+ THRESHOLD_INDEX_8,
+ THRESHOLD_INDEX_9,
+ THRESHOLD_INDEX_10,
+ THRESHOLD_INDEX_11,
+ THRESHOLD_INDEX_COUNT,
+};
+
+static const u32 core_process_speedos[][CORE_PROCESS_CORNERS_NUM] = {
+ {180},
+ {170},
+ {195},
+ {180},
+ {168},
+ {192},
+ {180},
+ {170},
+ {195},
+ {180},
+ {180},
+ {180},
+};
+
+static const u32 cpu_process_speedos[][CPU_PROCESS_CORNERS_NUM] = {
+ {306, 338, 360, 376, UINT_MAX},
+ {295, 336, 358, 375, UINT_MAX},
+ {325, 325, 358, 375, UINT_MAX},
+ {325, 325, 358, 375, UINT_MAX},
+ {292, 324, 348, 364, UINT_MAX},
+ {324, 324, 348, 364, UINT_MAX},
+ {324, 324, 348, 364, UINT_MAX},
+ {295, 336, 358, 375, UINT_MAX},
+ {358, 358, 358, 358, 397, UINT_MAX},
+ {364, 364, 364, 364, 397, UINT_MAX},
+ {295, 336, 358, 375, 391, UINT_MAX},
+ {295, 336, 358, 375, 391, UINT_MAX},
+};
+
+static int threshold_index;
+static int package_id;
+
+static void fuse_speedo_calib(u32 *speedo_g, u32 *speedo_lp,
+ struct device *dev)
+{
+ u32 reg;
+ int ate_ver;
+ int bit_minus1;
+ int bit_minus2;
+
+ reg = tegra30_fuse_readl(FUSE_SPEEDO_CALIB_0);
+
+ *speedo_lp = (reg & 0xFFFF) * 4;
+ *speedo_g = ((reg >> 16) & 0xFFFF) * 4;
+
+ ate_ver = tegra30_fuse_readl(FUSE_TEST_PROG_VER);
+ dev_dbg(dev, "ATE prog ver %d.%d\n", ate_ver/10, ate_ver%10);
+
+ if (ate_ver >= 26) {
+ bit_minus1 = tegra30_spare_fuse(LP_SPEEDO_BIT_MINUS1);
+ bit_minus1 |= tegra30_spare_fuse(LP_SPEEDO_BIT_MINUS1_R);
+ bit_minus2 = tegra30_spare_fuse(LP_SPEEDO_BIT_MINUS2);
+ bit_minus2 |= tegra30_spare_fuse(LP_SPEEDO_BIT_MINUS2_R);
+ *speedo_lp |= (bit_minus1 << 1) | bit_minus2;
+
+ bit_minus1 = tegra30_spare_fuse(G_SPEEDO_BIT_MINUS1);
+ bit_minus1 |= tegra30_spare_fuse(G_SPEEDO_BIT_MINUS1_R);
+ bit_minus2 = tegra30_spare_fuse(G_SPEEDO_BIT_MINUS2);
+ bit_minus2 |= tegra30_spare_fuse(G_SPEEDO_BIT_MINUS2_R);
+ *speedo_g |= (bit_minus1 << 1) | bit_minus2;
+ } else {
+ *speedo_lp |= 0x3;
+ *speedo_g |= 0x3;
+ }
+}
+
+static void rev_sku_to_speedo_ids(struct tegra_sku_info *sku_info,
+ struct device *dev)
+{
+ switch (sku_info->revision) {
+ case TEGRA_REVISION_A01:
+ sku_info->cpu_speedo_id = 0;
+ sku_info->soc_speedo_id = 0;
+ threshold_index = THRESHOLD_INDEX_0;
+ break;
+ case TEGRA_REVISION_A02:
+ case TEGRA_REVISION_A03:
+ switch (sku_info->sku_id) {
+ case 0x87:
+ case 0x82:
+ sku_info->cpu_speedo_id = 1;
+ sku_info->soc_speedo_id = 1;
+ threshold_index = THRESHOLD_INDEX_1;
+ break;
+ case 0x81:
+ switch (package_id) {
+ case 1:
+ sku_info->cpu_speedo_id = 2;
+ sku_info->soc_speedo_id = 2;
+ threshold_index = THRESHOLD_INDEX_2;
+ break;
+ case 2:
+ sku_info->cpu_speedo_id = 4;
+ sku_info->soc_speedo_id = 1;
+ threshold_index = THRESHOLD_INDEX_7;
+ break;
+ default:
+ dev_err(dev, "Unknown pkg %d\n", package_id);
+ BUG();
+ break;
+ }
+ break;
+ case 0x80:
+ switch (package_id) {
+ case 1:
+ sku_info->cpu_speedo_id = 5;
+ sku_info->soc_speedo_id = 2;
+ threshold_index = THRESHOLD_INDEX_8;
+ break;
+ case 2:
+ sku_info->cpu_speedo_id = 6;
+ sku_info->soc_speedo_id = 2;
+ threshold_index = THRESHOLD_INDEX_9;
+ break;
+ default:
+ dev_err(dev, "Unknown pkg %d\n", package_id);
+ BUG();
+ break;
+ }
+ break;
+ case 0x83:
+ switch (package_id) {
+ case 1:
+ sku_info->cpu_speedo_id = 7;
+ sku_info->soc_speedo_id = 1;
+ threshold_index = THRESHOLD_INDEX_10;
+ break;
+ case 2:
+ sku_info->cpu_speedo_id = 3;
+ sku_info->soc_speedo_id = 2;
+ threshold_index = THRESHOLD_INDEX_3;
+ break;
+ default:
+ dev_err(dev, "Unknown pkg %d\n", package_id);
+ BUG();
+ break;
+ }
+ break;
+ case 0x8F:
+ sku_info->cpu_speedo_id = 8;
+ sku_info->soc_speedo_id = 1;
+ threshold_index = THRESHOLD_INDEX_11;
+ break;
+ case 0x08:
+ sku_info->cpu_speedo_id = 1;
+ sku_info->soc_speedo_id = 1;
+ threshold_index = THRESHOLD_INDEX_4;
+ break;
+ case 0x02:
+ sku_info->cpu_speedo_id = 2;
+ sku_info->soc_speedo_id = 2;
+ threshold_index = THRESHOLD_INDEX_5;
+ break;
+ case 0x04:
+ sku_info->cpu_speedo_id = 3;
+ sku_info->soc_speedo_id = 2;
+ threshold_index = THRESHOLD_INDEX_6;
+ break;
+ case 0:
+ switch (package_id) {
+ case 1:
+ sku_info->cpu_speedo_id = 2;
+ sku_info->soc_speedo_id = 2;
+ threshold_index = THRESHOLD_INDEX_2;
+ break;
+ case 2:
+ sku_info->cpu_speedo_id = 3;
+ sku_info->soc_speedo_id = 2;
+ threshold_index = THRESHOLD_INDEX_3;
+ break;
+ default:
+ dev_err(dev, "Unknown pkg %d\n", package_id);
+ BUG();
+ break;
+ }
+ break;
+ default:
+ dev_warn(dev, "Unknown SKU %d\n", sku_info->sku_id);
+ sku_info->cpu_speedo_id = 0;
+ sku_info->soc_speedo_id = 0;
+ threshold_index = THRESHOLD_INDEX_0;
+ break;
+ }
+ break;
+ default:
+ dev_warn(dev, "Unknown chip rev %d\n", sku_info->revision);
+ sku_info->cpu_speedo_id = 0;
+ sku_info->soc_speedo_id = 0;
+ threshold_index = THRESHOLD_INDEX_0;
+ break;
+ }
+}
+
+void tegra30_init_speedo_data(struct tegra_sku_info *sku_info,
+ struct device *dev)
+{
+ u32 cpu_speedo_val;
+ u32 core_speedo_val;
+ int i;
+
+ BUILD_BUG_ON(ARRAY_SIZE(cpu_process_speedos) !=
+ THRESHOLD_INDEX_COUNT);
+ BUILD_BUG_ON(ARRAY_SIZE(core_process_speedos) !=
+ THRESHOLD_INDEX_COUNT);
+
+ package_id = tegra30_fuse_readl(FUSE_PACKAGE_INFO) & 0x0F;
+
+ rev_sku_to_speedo_ids(sku_info, dev);
+ fuse_speedo_calib(&cpu_speedo_val, &core_speedo_val, dev);
+ dev_dbg(dev, "CPU speedo value %u\n", cpu_speedo_val);
+ dev_dbg(dev, "Core speedo value %u\n", core_speedo_val);
+
+ for (i = 0; i < CPU_PROCESS_CORNERS_NUM; i++) {
+ if (cpu_speedo_val < cpu_process_speedos[threshold_index][i])
+ break;
+ }
+ sku_info->cpu_process_id = i - 1;
+
+ if (sku_info->cpu_process_id == -1) {
+ dev_warn(dev, "CPU speedo value %3d out of range",
+ cpu_speedo_val);
+ sku_info->cpu_process_id = 0;
+ sku_info->cpu_speedo_id = 1;
+ }
+
+ for (i = 0; i < CORE_PROCESS_CORNERS_NUM; i++) {
+ if (core_speedo_val < core_process_speedos[threshold_index][i])
+ break;
+ }
+ sku_info->core_process_id = i - 1;
+
+ if (sku_info->core_process_id == -1) {
+ dev_warn(dev, "CORE speedo value %3d out of range",
+ core_speedo_val);
+ sku_info->core_process_id = 0;
+ sku_info->soc_speedo_id = 1;
+ }
+}
--
1.7.7.rc0.72.g4b5ea.dirty
^ permalink raw reply related [flat|nested] 21+ messages in thread
* [PATCH v3 4/6] ARM: tegra: Add efuse bindings
2014-01-28 23:36 [PATCH v3 0/6] efuse driver for Tegra Peter De Schrijver
` (2 preceding siblings ...)
2014-01-28 23:36 ` [PATCH v3 3/6] misc: fuse: Add efuse driver for Tegra Peter De Schrijver
@ 2014-01-28 23:36 ` Peter De Schrijver
2014-01-29 17:18 ` Rob Herring
2014-02-05 18:42 ` Stephen Warren
2014-01-28 23:36 ` [PATCH v3 5/6] misc: enable fuse drivers Peter De Schrijver
` (3 subsequent siblings)
7 siblings, 2 replies; 21+ messages in thread
From: Peter De Schrijver @ 2014-01-28 23:36 UTC (permalink / raw)
To: linux-arm-kernel
Add efuse bindings for Tegra20, Tegra30, Tegra114 and Tegra124.
Signed-off-by: Peter De Schrijver <pdeschrijver@nvidia.com>
---
.../devicetree/bindings/fuse/fuse-tegra.txt | 32 ++++++++++++++++++++
arch/arm/boot/dts/tegra114.dtsi | 7 ++++
arch/arm/boot/dts/tegra124.dtsi | 7 ++++
arch/arm/boot/dts/tegra20.dtsi | 7 ++++
arch/arm/boot/dts/tegra30.dtsi | 7 ++++
5 files changed, 60 insertions(+), 0 deletions(-)
create mode 100644 Documentation/devicetree/bindings/fuse/fuse-tegra.txt
diff --git a/Documentation/devicetree/bindings/fuse/fuse-tegra.txt b/Documentation/devicetree/bindings/fuse/fuse-tegra.txt
new file mode 100644
index 0000000..8a566a1
--- /dev/null
+++ b/Documentation/devicetree/bindings/fuse/fuse-tegra.txt
@@ -0,0 +1,32 @@
+NVIDIA Tegra20/Tegra30/Tegr114/Tegra124 fuse driver.
+
+Required properties:
+- compatible : should be:
+ "nvidia,tegra20-efuse"
+ "nvidia,tegra30-efuse"
+ "nvidia,tegra114-efuse"
+ "nvidia,tegra124-efuse"
+ Details:
+ nvidia,tegra20-efuse: Tegra20 requires using APB DMA to read the fuse data
+ due to a hardware bug. Tegra20 also lacks certain information which is
+ available in later generations such as fab code, lot code, wafer id,..
+ nvidia,tegra30-efuse, nvidia,tegra114-efuse and nvidia,tegra124-efuse:
+ The differences between these SoCs are the size of the efuse array,
+ the location of the spare (OEM programmable) bits and the location of
+ the speedo data.
+- reg: Should contain 2 entries: the first entry gives the physical address
+ and length of the fuse registers, the second entry gives the physical
+ address and length of the apbmisc registers. These are used to provide
+ the chipid, chip revision and strapping options.
+- clocks: Should contain a pointer to the fuse clock.
+
+Example:
+
+ fuse at 7000f800 {
+ compatible = "nvidia,tegra20-efuse";
+ reg = <0x7000F800 0x400>,
+ <0x70000000 0x400>;
+ clocks = <&tegra_car TEGRA20_CLK_FUSE>;
+ };
+
+
diff --git a/arch/arm/boot/dts/tegra114.dtsi b/arch/arm/boot/dts/tegra114.dtsi
index 389e987..05ca90b 100644
--- a/arch/arm/boot/dts/tegra114.dtsi
+++ b/arch/arm/boot/dts/tegra114.dtsi
@@ -481,6 +481,13 @@
clock-names = "pclk", "clk32k_in";
};
+ fuse at 7000f800 {
+ compatible = "nvidia,tegra114-efuse";
+ reg = <0x7000f800 0x400>,
+ <0x70000000 0x400>;
+ clocks = <&tegra_car TEGRA114_CLK_FUSE>;
+ };
+
iommu at 70019010 {
compatible = "nvidia,tegra114-smmu", "nvidia,tegra30-smmu";
reg = <0x70019010 0x02c
diff --git a/arch/arm/boot/dts/tegra124.dtsi b/arch/arm/boot/dts/tegra124.dtsi
index ec0698a..30faa73 100644
--- a/arch/arm/boot/dts/tegra124.dtsi
+++ b/arch/arm/boot/dts/tegra124.dtsi
@@ -381,6 +381,13 @@
clock-names = "pclk", "clk32k_in";
};
+ fuse@7000f800 {
+ compatible = "nvidia,tegra124-efuse";
+ reg = <0x7000f800 0x400>,
+ <0x70000000 0x400>;
+ clocks = <&tegra_car TEGRA124_CLK_FUSE>;
+ };
+
sdhci at 700b0000 {
compatible = "nvidia,tegra124-sdhci";
reg = <0x700b0000 0x200>;
diff --git a/arch/arm/boot/dts/tegra20.dtsi b/arch/arm/boot/dts/tegra20.dtsi
index 480ecda..a1a15d7 100644
--- a/arch/arm/boot/dts/tegra20.dtsi
+++ b/arch/arm/boot/dts/tegra20.dtsi
@@ -541,6 +541,13 @@
#size-cells = <0>;
};
+ fuse at 7000f800 {
+ compatible = "nvidia,tegra20-efuse";
+ reg = <0x7000F800 0x400>,
+ <0x70000000 0x400>;
+ clocks = <&tegra_car TEGRA20_CLK_FUSE>;
+ };
+
pcie-controller at 80003000 {
compatible = "nvidia,tegra20-pcie";
device_type = "pci";
diff --git a/arch/arm/boot/dts/tegra30.dtsi b/arch/arm/boot/dts/tegra30.dtsi
index ed8e770..1ec80fa 100644
--- a/arch/arm/boot/dts/tegra30.dtsi
+++ b/arch/arm/boot/dts/tegra30.dtsi
@@ -623,6 +623,13 @@
nvidia,ahb = <&ahb>;
};
+ fuse at 7000f800 {
+ compatible = "nvidia,tegra30-efuse";
+ reg = <0x7000f800 0x400>,
+ <0x70000000 0x400>;
+ clocks = <&tegra_car TEGRA30_CLK_FUSE>;
+ };
+
ahub at 70080000 {
compatible = "nvidia,tegra30-ahub";
reg = <0x70080000 0x200
--
1.7.7.rc0.72.g4b5ea.dirty
^ permalink raw reply related [flat|nested] 21+ messages in thread
* [PATCH v3 5/6] misc: enable fuse drivers
2014-01-28 23:36 [PATCH v3 0/6] efuse driver for Tegra Peter De Schrijver
` (3 preceding siblings ...)
2014-01-28 23:36 ` [PATCH v3 4/6] ARM: tegra: Add efuse bindings Peter De Schrijver
@ 2014-01-28 23:36 ` Peter De Schrijver
2014-02-05 18:44 ` Stephen Warren
2014-01-28 23:36 ` [PATCH v3 6/6] ARM: tegra: remove fuse files from mach-tegra Peter De Schrijver
` (2 subsequent siblings)
7 siblings, 1 reply; 21+ messages in thread
From: Peter De Schrijver @ 2014-01-28 23:36 UTC (permalink / raw)
To: linux-arm-kernel
Enable building the fuse drivers.
Signed-off-by: Peter De Schrijver <pdeschrijver@nvidia.com>
---
arch/arm/mach-tegra/Makefile | 4 ----
drivers/misc/Makefile | 1 +
2 files changed, 1 insertions(+), 4 deletions(-)
diff --git a/arch/arm/mach-tegra/Makefile b/arch/arm/mach-tegra/Makefile
index 019bb17..92f8ab2 100644
--- a/arch/arm/mach-tegra/Makefile
+++ b/arch/arm/mach-tegra/Makefile
@@ -2,7 +2,6 @@ asflags-y += -march=armv7-a
obj-y += io.o
obj-y += irq.o
-obj-y += fuse.o
obj-y += pmc.o
obj-y += flowctrl.o
obj-y += powergate.o
@@ -13,14 +12,12 @@ obj-y += reset-handler.o
obj-y += sleep.o
obj-y += tegra.o
obj-$(CONFIG_CPU_IDLE) += cpuidle.o
-obj-$(CONFIG_ARCH_TEGRA_2x_SOC) += tegra20_speedo.o
obj-$(CONFIG_ARCH_TEGRA_2x_SOC) += tegra2_emc.o
obj-$(CONFIG_ARCH_TEGRA_2x_SOC) += sleep-tegra20.o
obj-$(CONFIG_ARCH_TEGRA_2x_SOC) += pm-tegra20.o
ifeq ($(CONFIG_CPU_IDLE),y)
obj-$(CONFIG_ARCH_TEGRA_2x_SOC) += cpuidle-tegra20.o
endif
-obj-$(CONFIG_ARCH_TEGRA_3x_SOC) += tegra30_speedo.o
obj-$(CONFIG_ARCH_TEGRA_3x_SOC) += sleep-tegra30.o
obj-$(CONFIG_ARCH_TEGRA_3x_SOC) += pm-tegra30.o
ifeq ($(CONFIG_CPU_IDLE),y)
@@ -29,7 +26,6 @@ endif
obj-$(CONFIG_SMP) += platsmp.o headsmp.o
obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o
-obj-$(CONFIG_ARCH_TEGRA_114_SOC) += tegra114_speedo.o
obj-$(CONFIG_ARCH_TEGRA_114_SOC) += sleep-tegra30.o
obj-$(CONFIG_ARCH_TEGRA_114_SOC) += pm-tegra30.o
ifeq ($(CONFIG_CPU_IDLE),y)
diff --git a/drivers/misc/Makefile b/drivers/misc/Makefile
index 99b9424..e243a8b 100644
--- a/drivers/misc/Makefile
+++ b/drivers/misc/Makefile
@@ -54,3 +54,4 @@ obj-$(CONFIG_LATTICE_ECP3_CONFIG) += lattice-ecp3-config.o
obj-$(CONFIG_SRAM) += sram.o
obj-y += mic/
obj-$(CONFIG_GENWQE) += genwqe/
+obj-y += fuse/
--
1.7.7.rc0.72.g4b5ea.dirty
^ permalink raw reply related [flat|nested] 21+ messages in thread
* [PATCH v3 6/6] ARM: tegra: remove fuse files from mach-tegra
2014-01-28 23:36 [PATCH v3 0/6] efuse driver for Tegra Peter De Schrijver
` (4 preceding siblings ...)
2014-01-28 23:36 ` [PATCH v3 5/6] misc: enable fuse drivers Peter De Schrijver
@ 2014-01-28 23:36 ` Peter De Schrijver
2014-02-05 18:45 ` Stephen Warren
2014-01-29 15:00 ` [PATCH v3 0/6] efuse driver for Tegra Paul Gortmaker
2014-02-05 18:49 ` Stephen Warren
7 siblings, 1 reply; 21+ messages in thread
From: Peter De Schrijver @ 2014-01-28 23:36 UTC (permalink / raw)
To: linux-arm-kernel
All fuse related functionality is now provided by the tegra fuse driver.
Hence all the fuse related files in mach-tegra can be removed.
Signed-off-by: Peter De Schrijver <pdeschrijver@nvidia.com>
---
arch/arm/mach-tegra/fuse.c | 252 ----------------------------
arch/arm/mach-tegra/fuse.h | 61 -------
arch/arm/mach-tegra/tegra114_speedo.c | 105 ------------
arch/arm/mach-tegra/tegra20_speedo.c | 110 ------------
arch/arm/mach-tegra/tegra30_speedo.c | 293 ---------------------------------
5 files changed, 0 insertions(+), 821 deletions(-)
delete mode 100644 arch/arm/mach-tegra/fuse.c
delete mode 100644 arch/arm/mach-tegra/fuse.h
delete mode 100644 arch/arm/mach-tegra/tegra114_speedo.c
delete mode 100644 arch/arm/mach-tegra/tegra20_speedo.c
delete mode 100644 arch/arm/mach-tegra/tegra30_speedo.c
diff --git a/arch/arm/mach-tegra/fuse.c b/arch/arm/mach-tegra/fuse.c
deleted file mode 100644
index c9ac23b..0000000
--- a/arch/arm/mach-tegra/fuse.c
+++ /dev/null
@@ -1,252 +0,0 @@
-/*
- * arch/arm/mach-tegra/fuse.c
- *
- * Copyright (C) 2010 Google, Inc.
- * Copyright (c) 2013, NVIDIA CORPORATION. All rights reserved.
- *
- * Author:
- * Colin Cross <ccross@android.com>
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/io.h>
-#include <linux/export.h>
-#include <linux/random.h>
-#include <linux/clk.h>
-#include <linux/tegra-soc.h>
-
-#include "fuse.h"
-#include "iomap.h"
-#include "apbio.h"
-
-/* Tegra20 only */
-#define FUSE_UID_LOW 0x108
-#define FUSE_UID_HIGH 0x10c
-
-/* Tegra30 and later */
-#define FUSE_VENDOR_CODE 0x200
-#define FUSE_FAB_CODE 0x204
-#define FUSE_LOT_CODE_0 0x208
-#define FUSE_LOT_CODE_1 0x20c
-#define FUSE_WAFER_ID 0x210
-#define FUSE_X_COORDINATE 0x214
-#define FUSE_Y_COORDINATE 0x218
-
-#define FUSE_SKU_INFO 0x110
-
-#define TEGRA20_FUSE_SPARE_BIT 0x200
-#define TEGRA30_FUSE_SPARE_BIT 0x244
-
-int tegra_sku_id;
-int tegra_cpu_process_id;
-int tegra_core_process_id;
-int tegra_chip_id;
-int tegra_cpu_speedo_id; /* only exist in Tegra30 and later */
-int tegra_soc_speedo_id;
-enum tegra_revision tegra_revision;
-
-static struct clk *fuse_clk;
-static int tegra_fuse_spare_bit;
-static void (*tegra_init_speedo_data)(void);
-
-/* The BCT to use at boot is specified by board straps that can be read
- * through a APB misc register and decoded. 2 bits, i.e. 4 possible BCTs.
- */
-int tegra_bct_strapping;
-
-#define STRAP_OPT 0x008
-#define GMI_AD0 (1 << 4)
-#define GMI_AD1 (1 << 5)
-#define RAM_ID_MASK (GMI_AD0 | GMI_AD1)
-#define RAM_CODE_SHIFT 4
-
-static const char *tegra_revision_name[TEGRA_REVISION_MAX] = {
- [TEGRA_REVISION_UNKNOWN] = "unknown",
- [TEGRA_REVISION_A01] = "A01",
- [TEGRA_REVISION_A02] = "A02",
- [TEGRA_REVISION_A03] = "A03",
- [TEGRA_REVISION_A03p] = "A03 prime",
- [TEGRA_REVISION_A04] = "A04",
-};
-
-static void tegra_fuse_enable_clk(void)
-{
- if (IS_ERR(fuse_clk))
- fuse_clk = clk_get_sys(NULL, "fuse");
- if (IS_ERR(fuse_clk))
- return;
- clk_prepare_enable(fuse_clk);
-}
-
-static void tegra_fuse_disable_clk(void)
-{
- if (IS_ERR(fuse_clk))
- return;
- clk_disable_unprepare(fuse_clk);
-}
-
-u32 tegra_fuse_readl(unsigned long offset)
-{
- return tegra_apb_readl(TEGRA_FUSE_BASE + offset);
-}
-
-bool tegra_spare_fuse(int bit)
-{
- bool ret;
-
- tegra_fuse_enable_clk();
-
- ret = tegra_fuse_readl(tegra_fuse_spare_bit + bit * 4);
-
- tegra_fuse_disable_clk();
-
- return ret;
-}
-
-static enum tegra_revision tegra_get_revision(u32 id)
-{
- u32 minor_rev = (id >> 16) & 0xf;
-
- switch (minor_rev) {
- case 1:
- return TEGRA_REVISION_A01;
- case 2:
- return TEGRA_REVISION_A02;
- case 3:
- if (tegra_chip_id == TEGRA20 &&
- (tegra_spare_fuse(18) || tegra_spare_fuse(19)))
- return TEGRA_REVISION_A03p;
- else
- return TEGRA_REVISION_A03;
- case 4:
- return TEGRA_REVISION_A04;
- default:
- return TEGRA_REVISION_UNKNOWN;
- }
-}
-
-static void tegra_get_process_id(void)
-{
- u32 reg;
-
- tegra_fuse_enable_clk();
-
- reg = tegra_fuse_readl(tegra_fuse_spare_bit);
- tegra_cpu_process_id = (reg >> 6) & 3;
- reg = tegra_fuse_readl(tegra_fuse_spare_bit);
- tegra_core_process_id = (reg >> 12) & 3;
-
- tegra_fuse_disable_clk();
-}
-
-u32 tegra_read_chipid(void)
-{
- return readl_relaxed(IO_ADDRESS(TEGRA_APB_MISC_BASE) + 0x804);
-}
-
-static void __init tegra20_fuse_init_randomness(void)
-{
- u32 randomness[2];
-
- randomness[0] = tegra_fuse_readl(FUSE_UID_LOW);
- randomness[1] = tegra_fuse_readl(FUSE_UID_HIGH);
-
- add_device_randomness(randomness, sizeof(randomness));
-}
-
-/* Applies to Tegra30 or later */
-static void __init tegra30_fuse_init_randomness(void)
-{
- u32 randomness[7];
-
- randomness[0] = tegra_fuse_readl(FUSE_VENDOR_CODE);
- randomness[1] = tegra_fuse_readl(FUSE_FAB_CODE);
- randomness[2] = tegra_fuse_readl(FUSE_LOT_CODE_0);
- randomness[3] = tegra_fuse_readl(FUSE_LOT_CODE_1);
- randomness[4] = tegra_fuse_readl(FUSE_WAFER_ID);
- randomness[5] = tegra_fuse_readl(FUSE_X_COORDINATE);
- randomness[6] = tegra_fuse_readl(FUSE_Y_COORDINATE);
-
- add_device_randomness(randomness, sizeof(randomness));
-}
-
-void __init tegra_init_fuse(void)
-{
- u32 id;
- u32 randomness[5];
-
- u32 reg = readl(IO_ADDRESS(TEGRA_CLK_RESET_BASE + 0x48));
- reg |= 1 << 28;
- writel(reg, IO_ADDRESS(TEGRA_CLK_RESET_BASE + 0x48));
-
- /*
- * Enable FUSE clock. This needs to be hardcoded because the clock
- * subsystem is not active during early boot.
- */
- reg = readl(IO_ADDRESS(TEGRA_CLK_RESET_BASE + 0x14));
- reg |= 1 << 7;
- writel(reg, IO_ADDRESS(TEGRA_CLK_RESET_BASE + 0x14));
- fuse_clk = ERR_PTR(-EINVAL);
-
- reg = tegra_fuse_readl(FUSE_SKU_INFO);
- randomness[0] = reg;
- tegra_sku_id = reg & 0xFF;
-
- reg = tegra_apb_readl(TEGRA_APB_MISC_BASE + STRAP_OPT);
- randomness[1] = reg;
- tegra_bct_strapping = (reg & RAM_ID_MASK) >> RAM_CODE_SHIFT;
-
- id = tegra_read_chipid();
- randomness[2] = id;
- tegra_chip_id = (id >> 8) & 0xff;
-
- switch (tegra_chip_id) {
- case TEGRA20:
- tegra_fuse_spare_bit = TEGRA20_FUSE_SPARE_BIT;
- tegra_init_speedo_data = &tegra20_init_speedo_data;
- break;
- case TEGRA30:
- tegra_fuse_spare_bit = TEGRA30_FUSE_SPARE_BIT;
- tegra_init_speedo_data = &tegra30_init_speedo_data;
- break;
- case TEGRA114:
- tegra_init_speedo_data = &tegra114_init_speedo_data;
- break;
- default:
- pr_warn("Tegra: unknown chip id %d\n", tegra_chip_id);
- tegra_fuse_spare_bit = TEGRA20_FUSE_SPARE_BIT;
- tegra_init_speedo_data = &tegra_get_process_id;
- }
-
- tegra_revision = tegra_get_revision(id);
- tegra_init_speedo_data();
- randomness[3] = (tegra_cpu_process_id << 16) | tegra_core_process_id;
- randomness[4] = (tegra_cpu_speedo_id << 16) | tegra_soc_speedo_id;
-
- add_device_randomness(randomness, sizeof(randomness));
- switch (tegra_chip_id) {
- case TEGRA20:
- tegra20_fuse_init_randomness();
- break;
- case TEGRA30:
- case TEGRA114:
- default:
- tegra30_fuse_init_randomness();
- break;
- }
-
- pr_info("Tegra Revision: %s SKU: %d CPU Process: %d Core Process: %d\n",
- tegra_revision_name[tegra_revision],
- tegra_sku_id, tegra_cpu_process_id,
- tegra_core_process_id);
-}
diff --git a/arch/arm/mach-tegra/fuse.h b/arch/arm/mach-tegra/fuse.h
deleted file mode 100644
index b17c4ba..0000000
--- a/arch/arm/mach-tegra/fuse.h
+++ /dev/null
@@ -1,61 +0,0 @@
-/*
- * Copyright (C) 2010 Google, Inc.
- * Copyright (c) 2013, NVIDIA CORPORATION. All rights reserved.
- *
- * Author:
- * Colin Cross <ccross@android.com>
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- */
-
-#ifndef __MACH_TEGRA_FUSE_H
-#define __MACH_TEGRA_FUSE_H
-
-#define SKU_ID_T20 8
-#define SKU_ID_T25SE 20
-#define SKU_ID_AP25 23
-#define SKU_ID_T25 24
-#define SKU_ID_AP25E 27
-#define SKU_ID_T25E 28
-
-#ifndef __ASSEMBLY__
-
-extern int tegra_sku_id;
-extern int tegra_cpu_process_id;
-extern int tegra_core_process_id;
-extern int tegra_chip_id;
-extern int tegra_cpu_speedo_id; /* only exist in Tegra30 and later */
-extern int tegra_soc_speedo_id;
-
-unsigned long long tegra_chip_uid(void);
-bool tegra_spare_fuse(int bit);
-u32 tegra_fuse_readl(unsigned long offset);
-
-#ifdef CONFIG_ARCH_TEGRA_2x_SOC
-void tegra20_init_speedo_data(void);
-#else
-static inline void tegra20_init_speedo_data(void) {}
-#endif
-
-#ifdef CONFIG_ARCH_TEGRA_3x_SOC
-void tegra30_init_speedo_data(void);
-#else
-static inline void tegra30_init_speedo_data(void) {}
-#endif
-
-#ifdef CONFIG_ARCH_TEGRA_114_SOC
-void tegra114_init_speedo_data(void);
-#else
-static inline void tegra114_init_speedo_data(void) {}
-#endif
-#endif /* __ASSEMBLY__ */
-
-#endif
diff --git a/arch/arm/mach-tegra/tegra114_speedo.c b/arch/arm/mach-tegra/tegra114_speedo.c
deleted file mode 100644
index 7c73716..0000000
--- a/arch/arm/mach-tegra/tegra114_speedo.c
+++ /dev/null
@@ -1,105 +0,0 @@
-/*
- * Copyright (c) 2013, NVIDIA CORPORATION. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms and conditions of the GNU General Public License,
- * version 2, as published by the Free Software Foundation.
- *
- * This program is distributed in the hope it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program. If not, see <http://www.gnu.org/licenses/>.
- */
-
-#include <linux/kernel.h>
-#include <linux/bug.h>
-#include <linux/tegra-soc.h>
-
-#include "fuse.h"
-
-#define CORE_PROCESS_CORNERS_NUM 2
-#define CPU_PROCESS_CORNERS_NUM 2
-
-enum {
- THRESHOLD_INDEX_0,
- THRESHOLD_INDEX_1,
- THRESHOLD_INDEX_COUNT,
-};
-
-static const u32 core_process_speedos[][CORE_PROCESS_CORNERS_NUM] = {
- {1123, UINT_MAX},
- {0, UINT_MAX},
-};
-
-static const u32 cpu_process_speedos[][CPU_PROCESS_CORNERS_NUM] = {
- {1695, UINT_MAX},
- {0, UINT_MAX},
-};
-
-static void rev_sku_to_speedo_ids(int rev, int sku, int *threshold)
-{
- u32 tmp;
-
- switch (sku) {
- case 0x00:
- case 0x10:
- case 0x05:
- case 0x06:
- tegra_cpu_speedo_id = 1;
- tegra_soc_speedo_id = 0;
- *threshold = THRESHOLD_INDEX_0;
- break;
-
- case 0x03:
- case 0x04:
- tegra_cpu_speedo_id = 2;
- tegra_soc_speedo_id = 1;
- *threshold = THRESHOLD_INDEX_1;
- break;
-
- default:
- pr_err("Tegra114 Unknown SKU %d\n", sku);
- tegra_cpu_speedo_id = 0;
- tegra_soc_speedo_id = 0;
- *threshold = THRESHOLD_INDEX_0;
- break;
- }
-
- if (rev == TEGRA_REVISION_A01) {
- tmp = tegra_fuse_readl(0x270) << 1;
- tmp |= tegra_fuse_readl(0x26c);
- if (!tmp)
- tegra_cpu_speedo_id = 0;
- }
-}
-
-void tegra114_init_speedo_data(void)
-{
- u32 cpu_speedo_val;
- u32 core_speedo_val;
- int threshold;
- int i;
-
- BUILD_BUG_ON(ARRAY_SIZE(cpu_process_speedos) !=
- THRESHOLD_INDEX_COUNT);
- BUILD_BUG_ON(ARRAY_SIZE(core_process_speedos) !=
- THRESHOLD_INDEX_COUNT);
-
- rev_sku_to_speedo_ids(tegra_revision, tegra_sku_id, &threshold);
-
- cpu_speedo_val = tegra_fuse_readl(0x12c) + 1024;
- core_speedo_val = tegra_fuse_readl(0x134);
-
- for (i = 0; i < CPU_PROCESS_CORNERS_NUM; i++)
- if (cpu_speedo_val < cpu_process_speedos[threshold][i])
- break;
- tegra_cpu_process_id = i;
-
- for (i = 0; i < CORE_PROCESS_CORNERS_NUM; i++)
- if (core_speedo_val < core_process_speedos[threshold][i])
- break;
- tegra_core_process_id = i;
-}
diff --git a/arch/arm/mach-tegra/tegra20_speedo.c b/arch/arm/mach-tegra/tegra20_speedo.c
deleted file mode 100644
index 3b1bb53..0000000
--- a/arch/arm/mach-tegra/tegra20_speedo.c
+++ /dev/null
@@ -1,110 +0,0 @@
-/*
- * Copyright (c) 2012, NVIDIA CORPORATION. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms and conditions of the GNU General Public License,
- * version 2, as published by the Free Software Foundation.
- *
- * This program is distributed in the hope it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program. If not, see <http://www.gnu.org/licenses/>.
- */
-
-#include <linux/kernel.h>
-#include <linux/bug.h>
-#include <linux/tegra-soc.h>
-
-#include "fuse.h"
-
-#define CPU_SPEEDO_LSBIT 20
-#define CPU_SPEEDO_MSBIT 29
-#define CPU_SPEEDO_REDUND_LSBIT 30
-#define CPU_SPEEDO_REDUND_MSBIT 39
-#define CPU_SPEEDO_REDUND_OFFS (CPU_SPEEDO_REDUND_MSBIT - CPU_SPEEDO_MSBIT)
-
-#define CORE_SPEEDO_LSBIT 40
-#define CORE_SPEEDO_MSBIT 47
-#define CORE_SPEEDO_REDUND_LSBIT 48
-#define CORE_SPEEDO_REDUND_MSBIT 55
-#define CORE_SPEEDO_REDUND_OFFS (CORE_SPEEDO_REDUND_MSBIT - CORE_SPEEDO_MSBIT)
-
-#define SPEEDO_MULT 4
-
-#define PROCESS_CORNERS_NUM 4
-
-#define SPEEDO_ID_SELECT_0(rev) ((rev) <= 2)
-#define SPEEDO_ID_SELECT_1(sku) \
- (((sku) != 20) && ((sku) != 23) && ((sku) != 24) && \
- ((sku) != 27) && ((sku) != 28))
-
-enum {
- SPEEDO_ID_0,
- SPEEDO_ID_1,
- SPEEDO_ID_2,
- SPEEDO_ID_COUNT,
-};
-
-static const u32 cpu_process_speedos[][PROCESS_CORNERS_NUM] = {
- {315, 366, 420, UINT_MAX},
- {303, 368, 419, UINT_MAX},
- {316, 331, 383, UINT_MAX},
-};
-
-static const u32 core_process_speedos[][PROCESS_CORNERS_NUM] = {
- {165, 195, 224, UINT_MAX},
- {165, 195, 224, UINT_MAX},
- {165, 195, 224, UINT_MAX},
-};
-
-void tegra20_init_speedo_data(void)
-{
- u32 reg;
- u32 val;
- int i;
-
- BUILD_BUG_ON(ARRAY_SIZE(cpu_process_speedos) != SPEEDO_ID_COUNT);
- BUILD_BUG_ON(ARRAY_SIZE(core_process_speedos) != SPEEDO_ID_COUNT);
-
- if (SPEEDO_ID_SELECT_0(tegra_revision))
- tegra_soc_speedo_id = SPEEDO_ID_0;
- else if (SPEEDO_ID_SELECT_1(tegra_sku_id))
- tegra_soc_speedo_id = SPEEDO_ID_1;
- else
- tegra_soc_speedo_id = SPEEDO_ID_2;
-
- val = 0;
- for (i = CPU_SPEEDO_MSBIT; i >= CPU_SPEEDO_LSBIT; i--) {
- reg = tegra_spare_fuse(i) |
- tegra_spare_fuse(i + CPU_SPEEDO_REDUND_OFFS);
- val = (val << 1) | (reg & 0x1);
- }
- val = val * SPEEDO_MULT;
- pr_debug("%s CPU speedo value %u\n", __func__, val);
-
- for (i = 0; i < (PROCESS_CORNERS_NUM - 1); i++) {
- if (val <= cpu_process_speedos[tegra_soc_speedo_id][i])
- break;
- }
- tegra_cpu_process_id = i;
-
- val = 0;
- for (i = CORE_SPEEDO_MSBIT; i >= CORE_SPEEDO_LSBIT; i--) {
- reg = tegra_spare_fuse(i) |
- tegra_spare_fuse(i + CORE_SPEEDO_REDUND_OFFS);
- val = (val << 1) | (reg & 0x1);
- }
- val = val * SPEEDO_MULT;
- pr_debug("%s Core speedo value %u\n", __func__, val);
-
- for (i = 0; i < (PROCESS_CORNERS_NUM - 1); i++) {
- if (val <= core_process_speedos[tegra_soc_speedo_id][i])
- break;
- }
- tegra_core_process_id = i;
-
- pr_info("Tegra20 Soc Speedo ID %d", tegra_soc_speedo_id);
-}
diff --git a/arch/arm/mach-tegra/tegra30_speedo.c b/arch/arm/mach-tegra/tegra30_speedo.c
deleted file mode 100644
index 81a958d..0000000
--- a/arch/arm/mach-tegra/tegra30_speedo.c
+++ /dev/null
@@ -1,293 +0,0 @@
-/*
- * Copyright (c) 2012, NVIDIA CORPORATION. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms and conditions of the GNU General Public License,
- * version 2, as published by the Free Software Foundation.
- *
- * This program is distributed in the hope it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program. If not, see <http://www.gnu.org/licenses/>.
- */
-
-#include <linux/kernel.h>
-#include <linux/bug.h>
-#include <linux/tegra-soc.h>
-
-#include "fuse.h"
-
-#define CORE_PROCESS_CORNERS_NUM 1
-#define CPU_PROCESS_CORNERS_NUM 6
-
-#define FUSE_SPEEDO_CALIB_0 0x114
-#define FUSE_PACKAGE_INFO 0X1FC
-#define FUSE_TEST_PROG_VER 0X128
-
-#define G_SPEEDO_BIT_MINUS1 58
-#define G_SPEEDO_BIT_MINUS1_R 59
-#define G_SPEEDO_BIT_MINUS2 60
-#define G_SPEEDO_BIT_MINUS2_R 61
-#define LP_SPEEDO_BIT_MINUS1 62
-#define LP_SPEEDO_BIT_MINUS1_R 63
-#define LP_SPEEDO_BIT_MINUS2 64
-#define LP_SPEEDO_BIT_MINUS2_R 65
-
-enum {
- THRESHOLD_INDEX_0,
- THRESHOLD_INDEX_1,
- THRESHOLD_INDEX_2,
- THRESHOLD_INDEX_3,
- THRESHOLD_INDEX_4,
- THRESHOLD_INDEX_5,
- THRESHOLD_INDEX_6,
- THRESHOLD_INDEX_7,
- THRESHOLD_INDEX_8,
- THRESHOLD_INDEX_9,
- THRESHOLD_INDEX_10,
- THRESHOLD_INDEX_11,
- THRESHOLD_INDEX_COUNT,
-};
-
-static const u32 core_process_speedos[][CORE_PROCESS_CORNERS_NUM] = {
- {180},
- {170},
- {195},
- {180},
- {168},
- {192},
- {180},
- {170},
- {195},
- {180},
- {180},
- {180},
-};
-
-static const u32 cpu_process_speedos[][CPU_PROCESS_CORNERS_NUM] = {
- {306, 338, 360, 376, UINT_MAX},
- {295, 336, 358, 375, UINT_MAX},
- {325, 325, 358, 375, UINT_MAX},
- {325, 325, 358, 375, UINT_MAX},
- {292, 324, 348, 364, UINT_MAX},
- {324, 324, 348, 364, UINT_MAX},
- {324, 324, 348, 364, UINT_MAX},
- {295, 336, 358, 375, UINT_MAX},
- {358, 358, 358, 358, 397, UINT_MAX},
- {364, 364, 364, 364, 397, UINT_MAX},
- {295, 336, 358, 375, 391, UINT_MAX},
- {295, 336, 358, 375, 391, UINT_MAX},
-};
-
-static int threshold_index;
-static int package_id;
-
-static void fuse_speedo_calib(u32 *speedo_g, u32 *speedo_lp)
-{
- u32 reg;
- int ate_ver;
- int bit_minus1;
- int bit_minus2;
-
- reg = tegra_fuse_readl(FUSE_SPEEDO_CALIB_0);
-
- *speedo_lp = (reg & 0xFFFF) * 4;
- *speedo_g = ((reg >> 16) & 0xFFFF) * 4;
-
- ate_ver = tegra_fuse_readl(FUSE_TEST_PROG_VER);
- pr_info("%s: ATE prog ver %d.%d\n", __func__, ate_ver/10, ate_ver%10);
-
- if (ate_ver >= 26) {
- bit_minus1 = tegra_spare_fuse(LP_SPEEDO_BIT_MINUS1);
- bit_minus1 |= tegra_spare_fuse(LP_SPEEDO_BIT_MINUS1_R);
- bit_minus2 = tegra_spare_fuse(LP_SPEEDO_BIT_MINUS2);
- bit_minus2 |= tegra_spare_fuse(LP_SPEEDO_BIT_MINUS2_R);
- *speedo_lp |= (bit_minus1 << 1) | bit_minus2;
-
- bit_minus1 = tegra_spare_fuse(G_SPEEDO_BIT_MINUS1);
- bit_minus1 |= tegra_spare_fuse(G_SPEEDO_BIT_MINUS1_R);
- bit_minus2 = tegra_spare_fuse(G_SPEEDO_BIT_MINUS2);
- bit_minus2 |= tegra_spare_fuse(G_SPEEDO_BIT_MINUS2_R);
- *speedo_g |= (bit_minus1 << 1) | bit_minus2;
- } else {
- *speedo_lp |= 0x3;
- *speedo_g |= 0x3;
- }
-}
-
-static void rev_sku_to_speedo_ids(int rev, int sku)
-{
- switch (rev) {
- case TEGRA_REVISION_A01:
- tegra_cpu_speedo_id = 0;
- tegra_soc_speedo_id = 0;
- threshold_index = THRESHOLD_INDEX_0;
- break;
- case TEGRA_REVISION_A02:
- case TEGRA_REVISION_A03:
- switch (sku) {
- case 0x87:
- case 0x82:
- tegra_cpu_speedo_id = 1;
- tegra_soc_speedo_id = 1;
- threshold_index = THRESHOLD_INDEX_1;
- break;
- case 0x81:
- switch (package_id) {
- case 1:
- tegra_cpu_speedo_id = 2;
- tegra_soc_speedo_id = 2;
- threshold_index = THRESHOLD_INDEX_2;
- break;
- case 2:
- tegra_cpu_speedo_id = 4;
- tegra_soc_speedo_id = 1;
- threshold_index = THRESHOLD_INDEX_7;
- break;
- default:
- pr_err("Tegra30: Unknown pkg %d\n", package_id);
- BUG();
- break;
- }
- break;
- case 0x80:
- switch (package_id) {
- case 1:
- tegra_cpu_speedo_id = 5;
- tegra_soc_speedo_id = 2;
- threshold_index = THRESHOLD_INDEX_8;
- break;
- case 2:
- tegra_cpu_speedo_id = 6;
- tegra_soc_speedo_id = 2;
- threshold_index = THRESHOLD_INDEX_9;
- break;
- default:
- pr_err("Tegra30: Unknown pkg %d\n", package_id);
- BUG();
- break;
- }
- break;
- case 0x83:
- switch (package_id) {
- case 1:
- tegra_cpu_speedo_id = 7;
- tegra_soc_speedo_id = 1;
- threshold_index = THRESHOLD_INDEX_10;
- break;
- case 2:
- tegra_cpu_speedo_id = 3;
- tegra_soc_speedo_id = 2;
- threshold_index = THRESHOLD_INDEX_3;
- break;
- default:
- pr_err("Tegra30: Unknown pkg %d\n", package_id);
- BUG();
- break;
- }
- break;
- case 0x8F:
- tegra_cpu_speedo_id = 8;
- tegra_soc_speedo_id = 1;
- threshold_index = THRESHOLD_INDEX_11;
- break;
- case 0x08:
- tegra_cpu_speedo_id = 1;
- tegra_soc_speedo_id = 1;
- threshold_index = THRESHOLD_INDEX_4;
- break;
- case 0x02:
- tegra_cpu_speedo_id = 2;
- tegra_soc_speedo_id = 2;
- threshold_index = THRESHOLD_INDEX_5;
- break;
- case 0x04:
- tegra_cpu_speedo_id = 3;
- tegra_soc_speedo_id = 2;
- threshold_index = THRESHOLD_INDEX_6;
- break;
- case 0:
- switch (package_id) {
- case 1:
- tegra_cpu_speedo_id = 2;
- tegra_soc_speedo_id = 2;
- threshold_index = THRESHOLD_INDEX_2;
- break;
- case 2:
- tegra_cpu_speedo_id = 3;
- tegra_soc_speedo_id = 2;
- threshold_index = THRESHOLD_INDEX_3;
- break;
- default:
- pr_err("Tegra30: Unknown pkg %d\n", package_id);
- BUG();
- break;
- }
- break;
- default:
- pr_warn("Tegra30: Unknown SKU %d\n", sku);
- tegra_cpu_speedo_id = 0;
- tegra_soc_speedo_id = 0;
- threshold_index = THRESHOLD_INDEX_0;
- break;
- }
- break;
- default:
- pr_warn("Tegra30: Unknown chip rev %d\n", rev);
- tegra_cpu_speedo_id = 0;
- tegra_soc_speedo_id = 0;
- threshold_index = THRESHOLD_INDEX_0;
- break;
- }
-}
-
-void tegra30_init_speedo_data(void)
-{
- u32 cpu_speedo_val;
- u32 core_speedo_val;
- int i;
-
- BUILD_BUG_ON(ARRAY_SIZE(cpu_process_speedos) !=
- THRESHOLD_INDEX_COUNT);
- BUILD_BUG_ON(ARRAY_SIZE(core_process_speedos) !=
- THRESHOLD_INDEX_COUNT);
-
- package_id = tegra_fuse_readl(FUSE_PACKAGE_INFO) & 0x0F;
-
- rev_sku_to_speedo_ids(tegra_revision, tegra_sku_id);
- fuse_speedo_calib(&cpu_speedo_val, &core_speedo_val);
- pr_debug("%s CPU speedo value %u\n", __func__, cpu_speedo_val);
- pr_debug("%s Core speedo value %u\n", __func__, core_speedo_val);
-
- for (i = 0; i < CPU_PROCESS_CORNERS_NUM; i++) {
- if (cpu_speedo_val < cpu_process_speedos[threshold_index][i])
- break;
- }
- tegra_cpu_process_id = i - 1;
-
- if (tegra_cpu_process_id == -1) {
- pr_warn("Tegra30: CPU speedo value %3d out of range",
- cpu_speedo_val);
- tegra_cpu_process_id = 0;
- tegra_cpu_speedo_id = 1;
- }
-
- for (i = 0; i < CORE_PROCESS_CORNERS_NUM; i++) {
- if (core_speedo_val < core_process_speedos[threshold_index][i])
- break;
- }
- tegra_core_process_id = i - 1;
-
- if (tegra_core_process_id == -1) {
- pr_warn("Tegra30: CORE speedo value %3d out of range",
- core_speedo_val);
- tegra_core_process_id = 0;
- tegra_soc_speedo_id = 1;
- }
-
- pr_info("Tegra30: CPU Speedo ID %d, Soc Speedo ID %d",
- tegra_cpu_speedo_id, tegra_soc_speedo_id);
-}
--
1.7.7.rc0.72.g4b5ea.dirty
^ permalink raw reply related [flat|nested] 21+ messages in thread
* [PATCH v3 3/6] misc: fuse: Add efuse driver for Tegra
2014-01-28 23:36 ` [PATCH v3 3/6] misc: fuse: Add efuse driver for Tegra Peter De Schrijver
@ 2014-01-29 2:26 ` Jim Lin
2014-02-03 14:15 ` Peter De Schrijver
2014-02-05 19:15 ` Stephen Warren
1 sibling, 1 reply; 21+ messages in thread
From: Jim Lin @ 2014-01-29 2:26 UTC (permalink / raw)
To: linux-arm-kernel
On Wed, 2014-01-29 at 07:36 +0800, Peter De Schrijver wrote:
> Implement fuse driver for Tegra20, Tegra30, Tegra114 and Tegra124.
>
> Signed-off-by: Peter De Schrijver <pdeschrijver@nvidia.com>
> ---
> Documentation/ABI/testing/sysfs-driver-tegra-fuse | 8 +
> drivers/misc/fuse/Makefile | 1 +
> drivers/misc/fuse/tegra/Makefile | 7 +
> drivers/misc/fuse/tegra/fuse-tegra.c | 228 ++++++++++++++++
> drivers/misc/fuse/tegra/fuse-tegra20.c | 136 ++++++++++
> drivers/misc/fuse/tegra/fuse-tegra30.c | 178 +++++++++++++
> drivers/misc/fuse/tegra/fuse.h | 82 ++++++
Could we move this fuse.h to other folder under /include/linux
(like /include/linux/platform_data)
for other driver to include?
So other driver can invoke function to read fuse data if needed.
--nvpublic
^ permalink raw reply [flat|nested] 21+ messages in thread
* [PATCH v3 0/6] efuse driver for Tegra
2014-01-28 23:36 [PATCH v3 0/6] efuse driver for Tegra Peter De Schrijver
` (5 preceding siblings ...)
2014-01-28 23:36 ` [PATCH v3 6/6] ARM: tegra: remove fuse files from mach-tegra Peter De Schrijver
@ 2014-01-29 15:00 ` Paul Gortmaker
2014-01-30 9:45 ` Peter De Schrijver
2014-02-05 18:49 ` Stephen Warren
7 siblings, 1 reply; 21+ messages in thread
From: Paul Gortmaker @ 2014-01-29 15:00 UTC (permalink / raw)
To: linux-arm-kernel
On Tue, Jan 28, 2014 at 6:36 PM, Peter De Schrijver
<pdeschrijver@nvidia.com> wrote:
> This driver allows userspace to read the raw efuse data. Its userspace
> interface is modelled after the sunxi_sid driver which provides similar
> functionality for some Allwinner SoCs. It has been tested on
> Tegra20 (ventana), Tegra30 (beaverboard) and Tegra114 (dalmore).
>
> Changes since v1:
>
> * Add documentation for sysfs interface
> * Cleanup messages
>
> Changes since v2:
>
> * Incorporate early fuse code
> * Remove module support
> * Make driver always build when Tegra platform is selected
Given the above, you should be able to remove #include <linux/module.h>
and MODULE_DEVICE_TABLE, etc.
Paul.
--
> * Add DT binding document
> * Address comments on v2
>
> TODO:
> * test on Tegra124 (venice2)
>
> Peter De Schrijver (6):
> ARM: tegra: export apb dma readl/writel
> ARM: tegra: Add chipid, revision and fuse init
> misc: fuse: Add efuse driver for Tegra
> ARM: tegra: Add efuse bindings
> misc: enable fuse drivers
> ARM: tegra: remove fuse files from mach-tegra
>
> Documentation/ABI/testing/sysfs-driver-tegra-fuse | 8 +
> .../devicetree/bindings/fuse/fuse-tegra.txt | 32 +++
> arch/arm/boot/dts/tegra114.dtsi | 7 +
> arch/arm/boot/dts/tegra124.dtsi | 7 +
> arch/arm/boot/dts/tegra20.dtsi | 7 +
> arch/arm/boot/dts/tegra30.dtsi | 7 +
> arch/arm/mach-tegra/Makefile | 4 -
> arch/arm/mach-tegra/apbio.c | 51 ++--
> arch/arm/mach-tegra/cpuidle.c | 2 +-
> arch/arm/mach-tegra/flowctrl.c | 2 +-
> arch/arm/mach-tegra/fuse.c | 252 -----------------
> arch/arm/mach-tegra/fuse.h | 79 ------
> arch/arm/mach-tegra/hotplug.c | 2 +-
> arch/arm/mach-tegra/platsmp.c | 2 +-
> arch/arm/mach-tegra/pm.c | 2 +-
> arch/arm/mach-tegra/pmc.c | 2 +-
> arch/arm/mach-tegra/powergate.c | 2 +-
> arch/arm/mach-tegra/reset-handler.S | 2 +-
> arch/arm/mach-tegra/reset.c | 2 +-
> arch/arm/mach-tegra/sleep-tegra30.S | 2 +-
> arch/arm/mach-tegra/tegra.c | 2 +-
> arch/arm/mach-tegra/tegra114_speedo.c | 104 -------
> arch/arm/mach-tegra/tegra20_speedo.c | 109 --------
> arch/arm/mach-tegra/tegra2_emc.c | 2 +-
> arch/arm/mach-tegra/tegra30_speedo.c | 292 -------------------
> drivers/misc/Makefile | 1 +
> drivers/misc/fuse/Makefile | 1 +
> drivers/misc/fuse/tegra/Makefile | 7 +
> drivers/misc/fuse/tegra/fuse-tegra.c | 228 +++++++++++++++
> drivers/misc/fuse/tegra/fuse-tegra20.c | 136 +++++++++
> drivers/misc/fuse/tegra/fuse-tegra30.c | 178 ++++++++++++
> drivers/misc/fuse/tegra/fuse.h | 82 ++++++
> drivers/misc/fuse/tegra/tegra114_speedo.c | 110 ++++++++
> drivers/misc/fuse/tegra/tegra124_speedo.c | 164 +++++++++++
> drivers/misc/fuse/tegra/tegra20_speedo.c | 110 ++++++++
> drivers/misc/fuse/tegra/tegra30_speedo.c | 294 ++++++++++++++++++++
> include/linux/tegra-soc.h | 39 +++
> 37 files changed, 1461 insertions(+), 872 deletions(-)
> create mode 100644 Documentation/ABI/testing/sysfs-driver-tegra-fuse
> create mode 100644 Documentation/devicetree/bindings/fuse/fuse-tegra.txt
> delete mode 100644 arch/arm/mach-tegra/fuse.c
> delete mode 100644 arch/arm/mach-tegra/fuse.h
> delete mode 100644 arch/arm/mach-tegra/tegra114_speedo.c
> delete mode 100644 arch/arm/mach-tegra/tegra20_speedo.c
> delete mode 100644 arch/arm/mach-tegra/tegra30_speedo.c
> create mode 100644 drivers/misc/fuse/Makefile
> create mode 100644 drivers/misc/fuse/tegra/Makefile
> create mode 100644 drivers/misc/fuse/tegra/fuse-tegra.c
> create mode 100644 drivers/misc/fuse/tegra/fuse-tegra20.c
> create mode 100644 drivers/misc/fuse/tegra/fuse-tegra30.c
> create mode 100644 drivers/misc/fuse/tegra/fuse.h
> create mode 100644 drivers/misc/fuse/tegra/tegra114_speedo.c
> create mode 100644 drivers/misc/fuse/tegra/tegra124_speedo.c
> create mode 100644 drivers/misc/fuse/tegra/tegra20_speedo.c
> create mode 100644 drivers/misc/fuse/tegra/tegra30_speedo.c
>
> --
> 1.7.7.rc0.72.g4b5ea.dirty
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo at vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at http://www.tux.org/lkml/
^ permalink raw reply [flat|nested] 21+ messages in thread
* [PATCH v3 4/6] ARM: tegra: Add efuse bindings
2014-01-28 23:36 ` [PATCH v3 4/6] ARM: tegra: Add efuse bindings Peter De Schrijver
@ 2014-01-29 17:18 ` Rob Herring
2014-02-05 18:42 ` Stephen Warren
1 sibling, 0 replies; 21+ messages in thread
From: Rob Herring @ 2014-01-29 17:18 UTC (permalink / raw)
To: linux-arm-kernel
On Tue, Jan 28, 2014 at 5:36 PM, Peter De Schrijver
<pdeschrijver@nvidia.com> wrote:
> Add efuse bindings for Tegra20, Tegra30, Tegra114 and Tegra124.
>
> Signed-off-by: Peter De Schrijver <pdeschrijver@nvidia.com>
Acked-by: Rob Herring <robh@kernel.org>
Rob
> ---
> .../devicetree/bindings/fuse/fuse-tegra.txt | 32 ++++++++++++++++++++
> arch/arm/boot/dts/tegra114.dtsi | 7 ++++
> arch/arm/boot/dts/tegra124.dtsi | 7 ++++
> arch/arm/boot/dts/tegra20.dtsi | 7 ++++
> arch/arm/boot/dts/tegra30.dtsi | 7 ++++
> 5 files changed, 60 insertions(+), 0 deletions(-)
> create mode 100644 Documentation/devicetree/bindings/fuse/fuse-tegra.txt
>
> diff --git a/Documentation/devicetree/bindings/fuse/fuse-tegra.txt b/Documentation/devicetree/bindings/fuse/fuse-tegra.txt
> new file mode 100644
> index 0000000..8a566a1
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/fuse/fuse-tegra.txt
> @@ -0,0 +1,32 @@
> +NVIDIA Tegra20/Tegra30/Tegr114/Tegra124 fuse driver.
> +
> +Required properties:
> +- compatible : should be:
> + "nvidia,tegra20-efuse"
> + "nvidia,tegra30-efuse"
> + "nvidia,tegra114-efuse"
> + "nvidia,tegra124-efuse"
> + Details:
> + nvidia,tegra20-efuse: Tegra20 requires using APB DMA to read the fuse data
> + due to a hardware bug. Tegra20 also lacks certain information which is
> + available in later generations such as fab code, lot code, wafer id,..
> + nvidia,tegra30-efuse, nvidia,tegra114-efuse and nvidia,tegra124-efuse:
> + The differences between these SoCs are the size of the efuse array,
> + the location of the spare (OEM programmable) bits and the location of
> + the speedo data.
> +- reg: Should contain 2 entries: the first entry gives the physical address
> + and length of the fuse registers, the second entry gives the physical
> + address and length of the apbmisc registers. These are used to provide
> + the chipid, chip revision and strapping options.
> +- clocks: Should contain a pointer to the fuse clock.
> +
> +Example:
> +
> + fuse at 7000f800 {
> + compatible = "nvidia,tegra20-efuse";
> + reg = <0x7000F800 0x400>,
> + <0x70000000 0x400>;
> + clocks = <&tegra_car TEGRA20_CLK_FUSE>;
> + };
> +
> +
> diff --git a/arch/arm/boot/dts/tegra114.dtsi b/arch/arm/boot/dts/tegra114.dtsi
> index 389e987..05ca90b 100644
> --- a/arch/arm/boot/dts/tegra114.dtsi
> +++ b/arch/arm/boot/dts/tegra114.dtsi
> @@ -481,6 +481,13 @@
> clock-names = "pclk", "clk32k_in";
> };
>
> + fuse at 7000f800 {
> + compatible = "nvidia,tegra114-efuse";
> + reg = <0x7000f800 0x400>,
> + <0x70000000 0x400>;
> + clocks = <&tegra_car TEGRA114_CLK_FUSE>;
> + };
> +
> iommu at 70019010 {
> compatible = "nvidia,tegra114-smmu", "nvidia,tegra30-smmu";
> reg = <0x70019010 0x02c
> diff --git a/arch/arm/boot/dts/tegra124.dtsi b/arch/arm/boot/dts/tegra124.dtsi
> index ec0698a..30faa73 100644
> --- a/arch/arm/boot/dts/tegra124.dtsi
> +++ b/arch/arm/boot/dts/tegra124.dtsi
> @@ -381,6 +381,13 @@
> clock-names = "pclk", "clk32k_in";
> };
>
> + fuse at 7000f800 {
> + compatible = "nvidia,tegra124-efuse";
> + reg = <0x7000f800 0x400>,
> + <0x70000000 0x400>;
> + clocks = <&tegra_car TEGRA124_CLK_FUSE>;
> + };
> +
> sdhci at 700b0000 {
> compatible = "nvidia,tegra124-sdhci";
> reg = <0x700b0000 0x200>;
> diff --git a/arch/arm/boot/dts/tegra20.dtsi b/arch/arm/boot/dts/tegra20.dtsi
> index 480ecda..a1a15d7 100644
> --- a/arch/arm/boot/dts/tegra20.dtsi
> +++ b/arch/arm/boot/dts/tegra20.dtsi
> @@ -541,6 +541,13 @@
> #size-cells = <0>;
> };
>
> + fuse at 7000f800 {
> + compatible = "nvidia,tegra20-efuse";
> + reg = <0x7000F800 0x400>,
> + <0x70000000 0x400>;
> + clocks = <&tegra_car TEGRA20_CLK_FUSE>;
> + };
> +
> pcie-controller at 80003000 {
> compatible = "nvidia,tegra20-pcie";
> device_type = "pci";
> diff --git a/arch/arm/boot/dts/tegra30.dtsi b/arch/arm/boot/dts/tegra30.dtsi
> index ed8e770..1ec80fa 100644
> --- a/arch/arm/boot/dts/tegra30.dtsi
> +++ b/arch/arm/boot/dts/tegra30.dtsi
> @@ -623,6 +623,13 @@
> nvidia,ahb = <&ahb>;
> };
>
> + fuse at 7000f800 {
> + compatible = "nvidia,tegra30-efuse";
> + reg = <0x7000f800 0x400>,
> + <0x70000000 0x400>;
> + clocks = <&tegra_car TEGRA30_CLK_FUSE>;
> + };
> +
> ahub at 70080000 {
> compatible = "nvidia,tegra30-ahub";
> reg = <0x70080000 0x200
> --
> 1.7.7.rc0.72.g4b5ea.dirty
>
^ permalink raw reply [flat|nested] 21+ messages in thread
* [PATCH v3 0/6] efuse driver for Tegra
2014-01-29 15:00 ` [PATCH v3 0/6] efuse driver for Tegra Paul Gortmaker
@ 2014-01-30 9:45 ` Peter De Schrijver
0 siblings, 0 replies; 21+ messages in thread
From: Peter De Schrijver @ 2014-01-30 9:45 UTC (permalink / raw)
To: linux-arm-kernel
On Wed, Jan 29, 2014 at 04:00:27PM +0100, Paul Gortmaker wrote:
> On Tue, Jan 28, 2014 at 6:36 PM, Peter De Schrijver
> <pdeschrijver@nvidia.com> wrote:
> > This driver allows userspace to read the raw efuse data. Its userspace
> > interface is modelled after the sunxi_sid driver which provides similar
> > functionality for some Allwinner SoCs. It has been tested on
> > Tegra20 (ventana), Tegra30 (beaverboard) and Tegra114 (dalmore).
> >
> > Changes since v1:
> >
> > * Add documentation for sysfs interface
> > * Cleanup messages
> >
> > Changes since v2:
> >
> > * Incorporate early fuse code
> > * Remove module support
> > * Make driver always build when Tegra platform is selected
>
> Given the above, you should be able to remove #include <linux/module.h>
> and MODULE_DEVICE_TABLE, etc.
Indeed. Thanks for noticing!
Cheers,
Peter.
^ permalink raw reply [flat|nested] 21+ messages in thread
* [PATCH v3 3/6] misc: fuse: Add efuse driver for Tegra
2014-01-29 2:26 ` Jim Lin
@ 2014-02-03 14:15 ` Peter De Schrijver
2014-02-05 10:26 ` Jim Lin
0 siblings, 1 reply; 21+ messages in thread
From: Peter De Schrijver @ 2014-02-03 14:15 UTC (permalink / raw)
To: linux-arm-kernel
On Wed, Jan 29, 2014 at 03:26:18AM +0100, Jim Lin wrote:
> On Wed, 2014-01-29 at 07:36 +0800, Peter De Schrijver wrote:
> > Implement fuse driver for Tegra20, Tegra30, Tegra114 and Tegra124.
> >
> > Signed-off-by: Peter De Schrijver <pdeschrijver@nvidia.com>
> > ---
> > Documentation/ABI/testing/sysfs-driver-tegra-fuse | 8 +
> > drivers/misc/fuse/Makefile | 1 +
> > drivers/misc/fuse/tegra/Makefile | 7 +
> > drivers/misc/fuse/tegra/fuse-tegra.c | 228 ++++++++++++++++
> > drivers/misc/fuse/tegra/fuse-tegra20.c | 136 ++++++++++
> > drivers/misc/fuse/tegra/fuse-tegra30.c | 178 +++++++++++++
> > drivers/misc/fuse/tegra/fuse.h | 82 ++++++
> Could we move this fuse.h to other folder under /include/linux
> (like /include/linux/platform_data)
> for other driver to include?
I don't think we should expose everything in fuse.h to the world.
> So other driver can invoke function to read fuse data if needed.
Which functionality do you want? Just reading the fuse data exposed in
the sysfs file from a driver? exporting tegra_fuse_readl() should do
that I think?
Cheers,
Peter.
^ permalink raw reply [flat|nested] 21+ messages in thread
* [PATCH v3 3/6] misc: fuse: Add efuse driver for Tegra
2014-02-03 14:15 ` Peter De Schrijver
@ 2014-02-05 10:26 ` Jim Lin
0 siblings, 0 replies; 21+ messages in thread
From: Jim Lin @ 2014-02-05 10:26 UTC (permalink / raw)
To: linux-arm-kernel
Please ignore my comment.
I will try to use exported tegra_fuse_readl().
-----Original Message-----
From: Peter De Schrijver [mailto:pdeschrijver at nvidia.com]
Sent: Monday, February 03, 2014 10:15 PM
To: Jim Lin
Cc: linux-arm-kernel at lists.infradead.org; linux-tegra at vger.kernel.org; linux-kernel at vger.kernel.org; Rob Landley; Stephen Warren; Thierry Reding; Grant Likely; Rob Herring; Danny Huang; linux-doc at vger.kernel.org; devicetree at vger.kernel.org
Subject: Re: [PATCH v3 3/6] misc: fuse: Add efuse driver for Tegra
On Wed, Jan 29, 2014 at 03:26:18AM +0100, Jim Lin wrote:
> On Wed, 2014-01-29 at 07:36 +0800, Peter De Schrijver wrote:
> > Implement fuse driver for Tegra20, Tegra30, Tegra114 and Tegra124.
> >
> > Signed-off-by: Peter De Schrijver <pdeschrijver@nvidia.com>
> > ---
> > Documentation/ABI/testing/sysfs-driver-tegra-fuse | 8 +
> > drivers/misc/fuse/Makefile | 1 +
> > drivers/misc/fuse/tegra/Makefile | 7 +
> > drivers/misc/fuse/tegra/fuse-tegra.c | 228 ++++++++++++++++
> > drivers/misc/fuse/tegra/fuse-tegra20.c | 136 ++++++++++
> > drivers/misc/fuse/tegra/fuse-tegra30.c | 178 +++++++++++++
> > drivers/misc/fuse/tegra/fuse.h | 82 ++++++
> Could we move this fuse.h to other folder under /include/linux (like
> /include/linux/platform_data) for other driver to include?
I don't think we should expose everything in fuse.h to the world.
> So other driver can invoke function to read fuse data if needed.
Which functionality do you want? Just reading the fuse data exposed in the sysfs file from a driver? exporting tegra_fuse_readl() should do that I think?
Cheers,
Peter.
--nvpublic
^ permalink raw reply [flat|nested] 21+ messages in thread
* [PATCH v3 2/6] ARM: tegra: Add chipid, revision and fuse init
2014-01-28 23:36 ` [PATCH v3 2/6] ARM: tegra: Add chipid, revision and fuse init Peter De Schrijver
@ 2014-02-05 18:40 ` Stephen Warren
0 siblings, 0 replies; 21+ messages in thread
From: Stephen Warren @ 2014-02-05 18:40 UTC (permalink / raw)
To: linux-arm-kernel
On 01/28/2014 04:36 PM, Peter De Schrijver wrote:
> All fuse related functionality will move to a driver in the following patches.
> To prepare for this, export all the required functionality in a global header
> file and move all users of fuse.h to tegra-soc.h
The patch subject and description don't appear related to each-other.
^ permalink raw reply [flat|nested] 21+ messages in thread
* [PATCH v3 4/6] ARM: tegra: Add efuse bindings
2014-01-28 23:36 ` [PATCH v3 4/6] ARM: tegra: Add efuse bindings Peter De Schrijver
2014-01-29 17:18 ` Rob Herring
@ 2014-02-05 18:42 ` Stephen Warren
1 sibling, 0 replies; 21+ messages in thread
From: Stephen Warren @ 2014-02-05 18:42 UTC (permalink / raw)
To: linux-arm-kernel
On 01/28/2014 04:36 PM, Peter De Schrijver wrote:
> Add efuse bindings for Tegra20, Tegra30, Tegra114 and Tegra124.
> diff --git a/Documentation/devicetree/bindings/fuse/fuse-tegra.txt b/Documentation/devicetree/bindings/fuse/fuse-tegra.txt
> +- clocks: Should contain a pointer to the fuse clock.
I would prefer to use clock-names, and to follow the same text as all
the other Tegra bindings that are clock clients. In other words:
- clocks: Must contain an entry for each entry in clock-names.
See ../clocks/clock-bindings.txt for details.
- clock-names: Must include the following entries:
- fuse
(this will allow easy future changes to the binding if required)
^ permalink raw reply [flat|nested] 21+ messages in thread
* [PATCH v3 5/6] misc: enable fuse drivers
2014-01-28 23:36 ` [PATCH v3 5/6] misc: enable fuse drivers Peter De Schrijver
@ 2014-02-05 18:44 ` Stephen Warren
0 siblings, 0 replies; 21+ messages in thread
From: Stephen Warren @ 2014-02-05 18:44 UTC (permalink / raw)
To: linux-arm-kernel
On 01/28/2014 04:36 PM, Peter De Schrijver wrote:
> Enable building the fuse drivers.
This isn't really about enabling them. It's about changing which Tegra
fuse driver is built. Perhaps rephrase this more as:
ARM: tegra: build fuse driver from drivers/misc instead
The Tegra fuse code has moved to drivers/misc/fuse/tegra. Enable the
building of that code, and disable the building of the old fuse code in
arch/arm/mach-tegra/.
^ permalink raw reply [flat|nested] 21+ messages in thread
* [PATCH v3 6/6] ARM: tegra: remove fuse files from mach-tegra
2014-01-28 23:36 ` [PATCH v3 6/6] ARM: tegra: remove fuse files from mach-tegra Peter De Schrijver
@ 2014-02-05 18:45 ` Stephen Warren
0 siblings, 0 replies; 21+ messages in thread
From: Stephen Warren @ 2014-02-05 18:45 UTC (permalink / raw)
To: linux-arm-kernel
On 01/28/2014 04:36 PM, Peter De Schrijver wrote:
> All fuse related functionality is now provided by the tegra fuse driver.
> Hence all the fuse related files in mach-tegra can be removed.
It's probably worth squashing this into patch 5, since that's what makes
these files unused.
^ permalink raw reply [flat|nested] 21+ messages in thread
* [PATCH v3 0/6] efuse driver for Tegra
2014-01-28 23:36 [PATCH v3 0/6] efuse driver for Tegra Peter De Schrijver
` (6 preceding siblings ...)
2014-01-29 15:00 ` [PATCH v3 0/6] efuse driver for Tegra Paul Gortmaker
@ 2014-02-05 18:49 ` Stephen Warren
7 siblings, 0 replies; 21+ messages in thread
From: Stephen Warren @ 2014-02-05 18:49 UTC (permalink / raw)
To: linux-arm-kernel
On 01/28/2014 04:36 PM, Peter De Schrijver wrote:
> This driver allows userspace to read the raw efuse data. Its userspace
> interface is modelled after the sunxi_sid driver which provides similar
> functionality for some Allwinner SoCs. It has been tested on
> Tegra20 (ventana), Tegra30 (beaverboard) and Tegra114 (dalmore).
I think this series should have been CC'd to Greg and Arnd, since
they're listed in MAINTAINERS for drivers/misc/. I'll need their ack to
apply these patches to the Tegra tree.
^ permalink raw reply [flat|nested] 21+ messages in thread
* [PATCH v3 3/6] misc: fuse: Add efuse driver for Tegra
2014-01-28 23:36 ` [PATCH v3 3/6] misc: fuse: Add efuse driver for Tegra Peter De Schrijver
2014-01-29 2:26 ` Jim Lin
@ 2014-02-05 19:15 ` Stephen Warren
2014-02-06 9:11 ` Peter De Schrijver
1 sibling, 1 reply; 21+ messages in thread
From: Stephen Warren @ 2014-02-05 19:15 UTC (permalink / raw)
To: linux-arm-kernel
On 01/28/2014 04:36 PM, Peter De Schrijver wrote:
> Implement fuse driver for Tegra20, Tegra30, Tegra114 and Tegra124.
I assume most of this code is simply cut/paste from the existing code in
arch/arm/mach-tegra/? If so, "git format-patch -C" would have been
useful to highlight what changed when duplicating the files.
> diff --git a/Documentation/ABI/testing/sysfs-driver-tegra-fuse b/Documentation/ABI/testing/sysfs-driver-tegra-fuse
> +What: /sys/devices/*/<our-device>/fuse
> +Date: December 2013
> +Contact: Peter De Schrijver <pdeschrijver@nvidia.com>
> +Description: read-only access to the efuses on Tegra20, Tegra30, Tegra114
> + and Tegra124 SoC's from NVIDIA. The efuses contain write once
> + data programmed at the factory.
> +Users: any user space application which wants to read the efuses on
> + Tegra SoC's
Surely this file should describe the format of the file, since that's
part of the ABI too, right?
> diff --git a/drivers/misc/fuse/tegra/fuse-tegra20.c b/drivers/misc/fuse/tegra/fuse-tegra20.c
> +static int tegra20_fuse_probe(struct platform_device *pdev)
...
> + sku_info.revision = tegra_revision;
> + tegra20_init_speedo_data(&sku_info, &pdev->dev);
...
> +}
> +
> +static struct platform_driver tegra20_fuse_driver = {
> + .probe = tegra20_fuse_probe,
> + .driver = {
> + .name = "tegra20_fuse",
> + .owner = THIS_MODULE,
> + .of_match_table = tegra20_fuse_of_match,
> + }
> +};
> +
> +static int __init tegra20_fuse_init(void)
> +{
> + return platform_driver_register(&tegra20_fuse_driver);
> +}
> +postcore_initcall(tegra20_fuse_init);
That call to tegra20_init_speedo_data() now happens much later in boot.
Are you sure there's nothing that relies on data it sets up between when
tegra_fuse_init() is called (which is where it happens before this
series), and the somewhat arbitrary later time when this driver probes?
> diff --git a/drivers/misc/fuse/tegra/fuse-tegra30.c b/drivers/misc/fuse/tegra/fuse-tegra30.c
> +postcore_initcall(tegra30_fuse_init);
> +
There's a blank line at the end of the file. I thought checkpatch warned
about this? But actually it doesn't seem to at least in -f mode.
> diff --git a/drivers/misc/fuse/tegra/fuse.h b/drivers/misc/fuse/tegra/fuse.h
> +struct tegra_sku_info {
> + int sku_id;
> + int cpu_process_id;
> + int cpu_speedo_id;
> + int cpu_speedo_value;
> + int cpu_iddq_value;
> + int core_process_id;
> + int soc_speedo_id;
> + int gpu_speedo_id;
> + int gpu_process_id;
> + int gpu_speedo_value;
> + enum tegra_revision revision;
> +};
The only use of this appears to be to pass to tegra_fuse_create_sysfs()
which prints out the fields. Will there be more users in the future?
Otherwise, I'd be tempted to just print it out outside/before-calling
tegra_fuse_create_sysfs().
That said, I wonder if these values could/should be exposed in the sysfs
file to make it easier to interpret the fuses?
> diff --git a/drivers/misc/fuse/tegra/tegra114_speedo.c b/drivers/misc/fuse/tegra/tegra114_speedo.c
It might be nice to make these filenames consistent with the others,
e.g. fuse-speedo-tegraNNN.c/speedo-tegraNNN.c, or wrap them into
fuse-tegraNNN.c?
> diff --git a/drivers/misc/fuse/tegra/tegra30_speedo.c b/drivers/misc/fuse/tegra/tegra30_speedo.c
> +#define FUSE_SPEEDO_CALIB_0 0x14
> +#define FUSE_PACKAGE_INFO 0XFC
> +#define FUSE_TEST_PROG_VER 0X28
In arch/arm/mach-tegra/tegra30_speedo.c, those values are different:
#define FUSE_SPEEDO_CALIB_0 0x114
#define FUSE_PACKAGE_INFO 0X1FC
#define FUSE_TEST_PROG_VER 0X128
Was this change intentional? Perhaps it should be in a separate patch to
highlight the change, if it's an intentional bug-fix?
^ permalink raw reply [flat|nested] 21+ messages in thread
* [PATCH v3 3/6] misc: fuse: Add efuse driver for Tegra
2014-02-05 19:15 ` Stephen Warren
@ 2014-02-06 9:11 ` Peter De Schrijver
2014-02-06 16:45 ` Stephen Warren
0 siblings, 1 reply; 21+ messages in thread
From: Peter De Schrijver @ 2014-02-06 9:11 UTC (permalink / raw)
To: linux-arm-kernel
On Wed, Feb 05, 2014 at 08:15:46PM +0100, Stephen Warren wrote:
> On 01/28/2014 04:36 PM, Peter De Schrijver wrote:
> > Implement fuse driver for Tegra20, Tegra30, Tegra114 and Tegra124.
>
> I assume most of this code is simply cut/paste from the existing code in
> arch/arm/mach-tegra/? If so, "git format-patch -C" would have been
> useful to highlight what changed when duplicating the files.
>
It also has been rewritten slightly. Also the Tegra124 speedo file is new.
> > diff --git a/Documentation/ABI/testing/sysfs-driver-tegra-fuse b/Documentation/ABI/testing/sysfs-driver-tegra-fuse
> > +What: /sys/devices/*/<our-device>/fuse
> > +Date: December 2013
> > +Contact: Peter De Schrijver <pdeschrijver@nvidia.com>
> > +Description: read-only access to the efuses on Tegra20, Tegra30, Tegra114
> > + and Tegra124 SoC's from NVIDIA. The efuses contain write once
> > + data programmed at the factory.
> > +Users: any user space application which wants to read the efuses on
> > + Tegra SoC's
>
> Surely this file should describe the format of the file, since that's
> part of the ABI too, right?
>
Part of the fuse data is ODM defined so possibly board specific.
> > diff --git a/drivers/misc/fuse/tegra/fuse-tegra20.c b/drivers/misc/fuse/tegra/fuse-tegra20.c
>
> > +static int tegra20_fuse_probe(struct platform_device *pdev)
> ...
> > + sku_info.revision = tegra_revision;
> > + tegra20_init_speedo_data(&sku_info, &pdev->dev);
> ...
> > +}
> > +
> > +static struct platform_driver tegra20_fuse_driver = {
> > + .probe = tegra20_fuse_probe,
> > + .driver = {
> > + .name = "tegra20_fuse",
> > + .owner = THIS_MODULE,
> > + .of_match_table = tegra20_fuse_of_match,
> > + }
> > +};
> > +
> > +static int __init tegra20_fuse_init(void)
> > +{
> > + return platform_driver_register(&tegra20_fuse_driver);
> > +}
> > +postcore_initcall(tegra20_fuse_init);
>
> That call to tegra20_init_speedo_data() now happens much later in boot.
> Are you sure there's nothing that relies on data it sets up between when
> tegra_fuse_init() is called (which is where it happens before this
> series), and the somewhat arbitrary later time when this driver probes?
>
Will check.
> > diff --git a/drivers/misc/fuse/tegra/fuse-tegra30.c b/drivers/misc/fuse/tegra/fuse-tegra30.c
>
> > +postcore_initcall(tegra30_fuse_init);
> > +
>
> There's a blank line at the end of the file. I thought checkpatch warned
> about this? But actually it doesn't seem to at least in -f mode.
>
> > diff --git a/drivers/misc/fuse/tegra/fuse.h b/drivers/misc/fuse/tegra/fuse.h
>
> > +struct tegra_sku_info {
> > + int sku_id;
> > + int cpu_process_id;
> > + int cpu_speedo_id;
> > + int cpu_speedo_value;
> > + int cpu_iddq_value;
> > + int core_process_id;
> > + int soc_speedo_id;
> > + int gpu_speedo_id;
> > + int gpu_process_id;
> > + int gpu_speedo_value;
> > + enum tegra_revision revision;
> > +};
>
> The only use of this appears to be to pass to tegra_fuse_create_sysfs()
> which prints out the fields. Will there be more users in the future?
> Otherwise, I'd be tempted to just print it out outside/before-calling
> tegra_fuse_create_sysfs().
>
> That said, I wonder if these values could/should be exposed in the sysfs
> file to make it easier to interpret the fuses?
>
That could be done I think...
> > diff --git a/drivers/misc/fuse/tegra/tegra114_speedo.c b/drivers/misc/fuse/tegra/tegra114_speedo.c
>
> It might be nice to make these filenames consistent with the others,
> e.g. fuse-speedo-tegraNNN.c/speedo-tegraNNN.c, or wrap them into
> fuse-tegraNNN.c?
>
I expect 1 speedo file per new SoC, but at least every SoC since Tegra30 has
used the same way of reading the fuse data. Hence I think it's better to
keep them separate.
> > diff --git a/drivers/misc/fuse/tegra/tegra30_speedo.c b/drivers/misc/fuse/tegra/tegra30_speedo.c
>
> > +#define FUSE_SPEEDO_CALIB_0 0x14
> > +#define FUSE_PACKAGE_INFO 0XFC
> > +#define FUSE_TEST_PROG_VER 0X28
>
> In arch/arm/mach-tegra/tegra30_speedo.c, those values are different:
>
> #define FUSE_SPEEDO_CALIB_0 0x114
> #define FUSE_PACKAGE_INFO 0X1FC
> #define FUSE_TEST_PROG_VER 0X128
>
> Was this change intentional? Perhaps it should be in a separate patch to
> highlight the change, if it's an intentional bug-fix?
This is intentional. The old files used the offset from the fuse IP block base
address. The new files use the offset in the fuse array.
Cheers,
Peter.
^ permalink raw reply [flat|nested] 21+ messages in thread
* [PATCH v3 3/6] misc: fuse: Add efuse driver for Tegra
2014-02-06 9:11 ` Peter De Schrijver
@ 2014-02-06 16:45 ` Stephen Warren
0 siblings, 0 replies; 21+ messages in thread
From: Stephen Warren @ 2014-02-06 16:45 UTC (permalink / raw)
To: linux-arm-kernel
On 02/06/2014 02:11 AM, Peter De Schrijver wrote:
> On Wed, Feb 05, 2014 at 08:15:46PM +0100, Stephen Warren wrote:
>> On 01/28/2014 04:36 PM, Peter De Schrijver wrote:
>>> Implement fuse driver for Tegra20, Tegra30, Tegra114 and Tegra124.
>>> diff --git a/Documentation/ABI/testing/sysfs-driver-tegra-fuse b/Documentation/ABI/testing/sysfs-driver-tegra-fuse
>>> +What: /sys/devices/*/<our-device>/fuse
>>> +Date: December 2013
>>> +Contact: Peter De Schrijver <pdeschrijver@nvidia.com>
>>> +Description: read-only access to the efuses on Tegra20, Tegra30, Tegra114
>>> + and Tegra124 SoC's from NVIDIA. The efuses contain write once
>>> + data programmed at the factory.
>>> +Users: any user space application which wants to read the efuses on
>>> + Tegra SoC's
>>
>> Surely this file should describe the format of the file, since that's
>> part of the ABI too, right?
>>
>
> Part of the fuse data is ODM defined so possibly board specific.
I didn't mean the interpretation of which fuses mean what semantically,
but rather the data format of the file. IIRC looking at the code, it's
just a binary dump of the fuses, but it might be worth spelling out that
it's a byte-oriented binary file, with fuse 0 in bit 0 of byte 0 etc.?
^ permalink raw reply [flat|nested] 21+ messages in thread
end of thread, other threads:[~2014-02-06 16:45 UTC | newest]
Thread overview: 21+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2014-01-28 23:36 [PATCH v3 0/6] efuse driver for Tegra Peter De Schrijver
2014-01-28 23:36 ` [PATCH v3 1/6] ARM: tegra: export apb dma readl/writel Peter De Schrijver
2014-01-28 23:36 ` [PATCH v3 2/6] ARM: tegra: Add chipid, revision and fuse init Peter De Schrijver
2014-02-05 18:40 ` Stephen Warren
2014-01-28 23:36 ` [PATCH v3 3/6] misc: fuse: Add efuse driver for Tegra Peter De Schrijver
2014-01-29 2:26 ` Jim Lin
2014-02-03 14:15 ` Peter De Schrijver
2014-02-05 10:26 ` Jim Lin
2014-02-05 19:15 ` Stephen Warren
2014-02-06 9:11 ` Peter De Schrijver
2014-02-06 16:45 ` Stephen Warren
2014-01-28 23:36 ` [PATCH v3 4/6] ARM: tegra: Add efuse bindings Peter De Schrijver
2014-01-29 17:18 ` Rob Herring
2014-02-05 18:42 ` Stephen Warren
2014-01-28 23:36 ` [PATCH v3 5/6] misc: enable fuse drivers Peter De Schrijver
2014-02-05 18:44 ` Stephen Warren
2014-01-28 23:36 ` [PATCH v3 6/6] ARM: tegra: remove fuse files from mach-tegra Peter De Schrijver
2014-02-05 18:45 ` Stephen Warren
2014-01-29 15:00 ` [PATCH v3 0/6] efuse driver for Tegra Paul Gortmaker
2014-01-30 9:45 ` Peter De Schrijver
2014-02-05 18:49 ` Stephen Warren
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox