From mboxrd@z Thu Jan 1 00:00:00 1970 From: linus.walleij@linaro.org (Linus Walleij) Date: Wed, 29 Jan 2014 13:45:45 +0100 Subject: [PATCH] ARM: iop32x: fix reset handling for the EM7210 board Message-ID: <1390999545-31428-1-git-send-email-linus.walleij@linaro.org> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org This board was missed when converting all the others to proper abstracted GPIO handling. Fix it up the right way by requesting and driving GPIO line 0 high through gpiolib to reset the machine. Reported-by: Arnd Bergmann Signed-off-by: Linus Walleij --- ARM SoC folks, if you're happy with this fix, please apply it directly to fixes in the ARM SoC tree. --- arch/arm/mach-iop32x/em7210.c | 16 +++++++++++++--- 1 file changed, 13 insertions(+), 3 deletions(-) diff --git a/arch/arm/mach-iop32x/em7210.c b/arch/arm/mach-iop32x/em7210.c index 177cd073a83b..e0c4187f3799 100644 --- a/arch/arm/mach-iop32x/em7210.c +++ b/arch/arm/mach-iop32x/em7210.c @@ -23,6 +23,7 @@ #include #include #include +#include #include #include #include @@ -176,14 +177,21 @@ static struct platform_device em7210_serial_device = { .resource = &em7210_uart_resource, }; +#define EM7210_HARDWARE_RESET 0 + void em7210_power_off(void) { - *IOP3XX_GPOE &= 0xfe; - *IOP3XX_GPOD |= 0x01; + int ret; + + ret = gpio_direction_output(EM7210_HARDWARE_RESET, 1); + if (ret) + pr_crit("could not drive reset GPIO high\n"); } static void __init em7210_init_machine(void) { + int ret; + register_iop32x_gpio(); platform_device_register(&em7210_serial_device); platform_device_register(&iop3xx_i2c0_device); @@ -194,7 +202,9 @@ static void __init em7210_init_machine(void) i2c_register_board_info(0, em7210_i2c_devices, ARRAY_SIZE(em7210_i2c_devices)); - + ret = gpio_request(EM7210_HARDWARE_RESET, "reset"); + if (ret) + pr_err("could not request reset GPIO\n"); pm_power_off = em7210_power_off; } -- 1.8.5.3